Browse Topic: Heat resistant alloys
This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, forgings, and flash-welded rings up to 4.00 inches (101.6 mm), exclusive, in least distance between parallel sides (thickness) or diameter, and stock of any size for forging or flash-welded rings.
This specification covers closely-wound helical coil, screw thread inserts made from an age hardenable nickel base alloy formed wire of the type identified under the Unified Numbering System as UNS N07750. The inner surface of the insert coil, after assembly into a screw thread tapped hole, provides internal threads of standard 60° Unified Form.
This document covers metric studs made from a corrosion and heat resistant, age hardenable iron base alloy of the type identified under the Unified Numbering System as UNS S66286. The following specification designations and their properties are covered:
This specification covers a corrosion and heat-resistant nickel alloy in the form of investment castings.
This specification covers a corrosion-resistant steel in the form of sand or centrifugal castings.
This specification covers a corrosion and moderate heat resistant steel in the form of investment castings.
This specification covers a corrosion-resistant steel in the form of investment castings.
This specification covers a corrosion and heat-resistant steel in the form of investment castings.
This specification covers a corrosion and heat-resistant steel in the form of investment castings.
This specification covers a corrosion and heat-resistant steel in the form of investment castings.
This specification covers a corrosion and heat-resistant steel in the form of investment castings.
This specification covers a corrosion and heat-resistant nickel alloy in the form of investment castings.
This specification covers a corrosion-resistant steel in the form of sheet, strip, and plate.
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, and forging stock.
This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings up to 4.00 inches (101.6 mm), inclusive, in nominal diameter or least distance between parallel sides (thickness) having a maximum cross-sectional area of less than 12.6 square inches (81 cm2) in the solutioned, stabilized. and precipitation heat-treated condition. Stock for forging or flash welded rings may be of any size and condition as ordered.
This specification covers a premium-quality corrosion- and heat-resistant steel in the form of welded and drawn tubing.
This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, forgings, and flash welded rings up to 4.00 inches (101.6 mm), inclusive, in nominal thickness or distance between parallel sides and having a maximum cross-sectional area of less than 12.6 square inches (81 cm2). Stock for forging or flash welded rings may be of any size.
This specification covers a corrosion-resistant steel in the form of bars, forgings, and forging stock.
This specification covers a corrosion- and heat-resistant nickel-based alloy in the form of sheet, strip, and plate 0.020 to 2.25 inches (0.50 to 57.2 mm) in thickness.
This specification covers a corrosion-resistant steel in the form of bars and wire 0.75 inch (19 mm) and under in nominal diameter or distance between parallel sides (thickness).
This specification covers quality assurance sampling and testing procedures used to determine conformance to applicable material specifications of corrosion- and heat-resistant steel and alloy forgings.
This specification covers a titanium alloy in the form of sheet, strip, and plate up through 2.000 inches (50.80 mm), inclusive (see 8.5).
This specification covers a corrosion- and heat-resistant iron-chromium-nickel-cobalt alloy in the form of bars, wire, forgings, flash welded rings, and stock for forging, flash welded rings, or heading.
This specification covers two types of free-machining, corrosion- and heat-resistant steel in the form of bars, wire, forgings, and forging stock.
This specification covers a corrosion-resistant steel in the form of sheet and strip over 0.005 inch (0.13 mm) in nominal thickness.
This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars and forgings, flash welded rings, and stock for forging or flash welded rings.
This specification covers a corrosion- and heat-resistant steel in the form of welding wire.
This specification covers a corrosion- and heat-resistant steel in the form of seamless tubing.
This specification covers a corrosion- and heat-resistant nickel alloy in the form of sheet, strip, foil, and plate 1.00 inch (25.4 mm) and under in thickness.
This specification covers steel cleanliness requirements in inch/pound units for aircraft-quality, ferromagnetic, hardenable, corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria (see 8.2).
This specification covers two types of corrosion-resistant steel in the form of bars, wire, forgings, and forging stock.
This specification covers a corrosion and heat-resistant steel in the form of welding wire.
This specification covers a corrosion and heat-resistant cobalt alloy in the form of welding rods, coating rods, or wrought wire.
This specification covers a corrosion and heat-resistant, air-melted, nickel alloy in the form of investment castings.
This specification covers a corrosion and heat-resistant cobalt alloy in the form of welding wire.
This specification covers a corrosion and heat-resistant nickel alloy in the form of seamless tubing having nominal OD of 0.125 inch (3.18 mm) and over with nominal wall thickness of 0.015 inch (0.38 mm) and over (see 8.5).
Items per page:
1 – 50 of 4602