Search
Advanced Search
of the following are true
(
)

Results

Items (216,079)
Missile Hydraulic Pumps and Their Power SourcesAIR560D (Current)
This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.
A-6C4 Power Sources Committee
Test Procedures for Shear Strength of Automotive Brake Pads and Brake Lining AssembliesJ840_202603 (Current)3/31/2026
This SAE Recommended Practice covers equipment capabilities and the test procedure to quantify and qualify the shear strength between the friction material and backing plate or brake shoe for automotive applications. This SAE Recommended Practice is applicable to: bonded drum brake linings; integrally molded disc brake pads; disc brake pads and backing plate assemblies using mechanical retention systems (MRS); coupons from drum brake shoes or disc brake pad assemblies. The test and its results are also useful for short, semi-quantitative verification of the bonding and molding process. This Recommended Practice is applicable during product and process development, product verification and quality control. This Recommended Practice does not replicate or predict actual vehicle performance or part durability.
Brake Linings Standards Committee
FITTINGS, INSTALLATION OF FLARELESS TUBE, STRAIGHT-THREADED CONNECTORSAS33566A (Current)3/30/2026
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .1900-32 UNJF-3AAS3303B (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .2500-28 UNJF-3AAS3307B (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, TEE HEAD – CHAMFERED, PD SHANK NICKEL ALLOY (UNS N07001),165 KSI MIN UTS .3750-24 UNJF-3AAS3235D (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
STUD - STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS S66286), .3125-18 UNJC X .3125-24 UNJFAS3321F (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
Engine Rotation and Cylinder NumberingJ824_202206 (Current)6/29/2022
This SAE Standard was developed to provide a method for indicating the direction of engine rotation and numbering of engine cylinders. The document is intended for use in designing new engines to eliminate the differences which presently exist in industry.
Engine Power Test Code Committee
Test Cell Mass Fuel Flow Measurement Using Coriolis Flow MetersAIR6202 (Current)6/14/2017
The scope of this information report applies to the steady state measurement of direct mass fuel flow in gas turbine engine test cells. A measurement accuracy, and hence uncertainty of between ±0.1 to ±0.2% of value is believed to be achievable for liquid flow applications with some meter models/installations. Whilst capable of general transient measurement in 50 to 100 Hz region, this type of fuel meter is not capable of rapid transient measurement (in 100 to 250 Hz region). It is also not currently considered suitable for "in flight" fuel flow measurement.
EG-1E Gas Turbine Test Facilities and Equipment
Aerospace Series - Quality Management Systems Statistical Product Acceptance RequirementsAS9138 (Current)1/20/2018
This standard establishes requirements when implementing statistical product acceptance methods to meet defined risk requirements. This standard also establishes the minimum content required to be covered in an organization’s documented procedures that govern their application of statistical product acceptance methods. These general requirements and documented procedures apply the requirements of the 9100/9110/9120 quality management system standards, in addition to establishing requirements for retrievability, safety/critical characteristics, and quality parameters that protect the customer.
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
Software Life Cycle Processes – Implementation ConsiderationsIEEEEIA12207_2 (Current)6/16/2016
This guide provides implementation consideration guidance for the normative clauses of IEEE/EIA 12207.0. The guidance is based on software industry experience with the life cycle processes presented in IEEE/EIA 12207.0.
Systems Management Council
Integrated Project Processes for Engineering a SystemSAE1001 (Current)10/9/2018
This standard is applicable to the engineering or the reengineering of: a Commercial or non-commercial systems, or portions thereof; b Any system, small or large, simple or complex, software-intensive or not, precedented or unprecedented; c Systems made up of hardware, software, firmware, personnel, facilities, data, materials, services, techniques, or processes (or combinations thereof); d A new system or a legacy system, or portions thereof. The requirements of this standard, or a designated subset, are intended to be applied by projects establishing policies and procedures for project implementation of the adopted process and process elements of this standard. The requirements of this standard may be tailored as follows: a Processes – Processes may be tailored to be applicable for a given type of project or system. For example, the System Utilization Processes typically don’t apply for conceptual or prototype systems in the same manner as for full-volume production systems. b
G-47 Systems Engineering
IVHM Design GuidelinesARP6407 (Current)7/29/2019
This Aerospace Recommended Practice (ARP) provides guidance for the design of an integrated vehicle health management (IVHM) capability that will extend the vehicle’s inherent design to enable health management of the platform and its components. This guidance is technology-independent; the principles are generally applicable to the majority of potential IVHM design scenarios, including “clean sheet” system design, where IVHM is considered as a primary design consideration, and the retrofit design, where existing systems are modified and leveraged with the IVHM capability. In either case, this ARP provides guidance for designing the IVHM capability from the feasibility assessment to the conceptual design analysis and to the development design phases, with considerations given to trade studies, metrics, and life cycle impacts.
HM-1 Integrated Vehicle Health Management Committee
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.25 ounce per linear yard (9.6 g/linear m)AMS3782/1B (Current)9/10/2013
This specification covers one weight and type of para-aramid webbing.
AMS P Polymeric Materials Committee
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200000 (1379) Tensile, 21000000 (145) Modulus, 175 (347)AMS3894/16B (Current)9/13/2016
This specification covers one type of epoxy-resin-impregnated carbon fibers in the form of tape and sheet.
AMS P17 Polymer Matrix Composites Committee
Webbing, Low Modulus Aramid 1 (25) Wide, 600 (2669) Breaking Strength Herringbone TwillAMS3798/2C (Current)4/14/2015
This specification covers one width and one breaking strength of low-modulus aramid webbing.
AMS P Polymeric Materials Committee
Thread, Para-Aramid Intermediate Modulus 5000 yards per pound (10,080 m/kg), 35 pounds force (156 N) Breaking StrengthAMS3787/3B (Current)6/14/2016
This specification covers one weight and strength of para-aramid thread.
AMS P Polymeric Materials Committee
Synthetic Rubber and Cork Composition General Purpose MediumAMS3251J (Current)5/8/2014
This specification covers a synthetic rubber and cork composition in the form of sheet, strip, and molded shapes.
AMS CE Elastomers Committee
Identification ForgingsAMS2808E (Current)3/28/2017
This specification covers the requirements for identification of forgings, including die forgings, hand forgings, and rolled rings.
AMS B Finishes Processes and Fluids Committee
Type 14 40% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or ExtrusionsAMS3678/14A (Current)2/29/2016
This specification covers a polytetrafluoroethylene (PTFE) resin filled with 40% bronze powder in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
AMS P Polymeric Materials Committee
Type 5 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with PigmentAMS3678/5B (Current)2/29/2016
This specification covers a polytetrafluoroethylene (PTFE) resin filled with inorganic pigment in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
AMS P Polymeric Materials Committee
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 65 Durometer “A”AMS3571/3C (Current)9/23/2011
This specification covers one type of polyether-type urethane (EU) resin and hardener which, when mixed and cured, produce elastomeric polyurethane products.
AMS P Polymeric Materials Committee
Fluid, Reference for Testing Polyalphaolefin (PAO) Resistant MaterialAMS3400A (Current)9/8/2022
This specification covers a polyalphaolefin/ester-blend fluid.
AMS CE Elastomers Committee
Thread, Para-Aramid Intermediate Modulus 6700 yards per pound (13,507 m/kg), 25 pounds force (111 N) Breaking StrengthAMS3787/2B (Current)6/14/2016
This specification covers one weight and strength of para-aramid thread.
AMS P Polymeric Materials Committee
TAPE, NYLON, NONMELTING, REINFORCING 1 (25) Wide, 1000 (4450 N) Breaking StrengthAMS3777/3 (Current)10/1/1995
This specification covers one width and strength of nylon tape.
AMS P Polymeric Materials Committee
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200000 (1379) Tensile, 21000000 (145) Modulus, 175 (347)AMS3894/15B (Current)9/13/2016
This specification covers one type of epoxy-resin-impregnated carbon fibers in the form of tape and sheet.
AMS P17 Polymer Matrix Composites Committee
Type 15 15% Aromatic Polymer Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or ExtrusionsAMS3678/15A (Current)2/29/2016
This specification covers a polytetrafluoroethylene (PTFE) resin filled with 15% aromatic polymer in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
AMS P Polymeric Materials Committee
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 150000 (1034) Tensile, 20000000 (138) Modulus, 175 (347)AMS3894/2C (Current)9/14/2016
This specification covers one type of epoxy-resin-impregnated carbon fibers in the form of tape and sheet.
AMS P17 Polymer Matrix Composites Committee
Webbing, Low Modulus Aramid 1-3/4 (44) Wide, 10,000 (44,482) Breaking Strength Herringbone TwillAMS3798/11C (Current)4/14/2015
This specification covers one width and one breaking strength of low-modulus aramid webbing.
AMS P Polymeric Materials Committee
Webbing, Low Modulus Aramid 1 (25) Wide, 2500 (11,121) Breaking Strength Herringbone TwillAMS3798/15C (Current)4/14/2015
This specification covers one width and one breaking strength of low-modulus aramid webbing.
AMS P Polymeric Materials Committee
Webbing, Low Modulus Aramid 9/16 (14) Wide, 500 (2224) Breaking Strength Herringbone Twill, Resin TreatedAMS3798/1C (Current)4/14/2015
This specification covers one width and one breaking strength of low-modulus aramid webbing.
AMS P Polymeric Materials Committee
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 45 Durometer “A”AMS3571/1C (Current)9/23/2011
This specification covers one type of polyether-type urethane (EU) resin and hardener which, when mixed and cured, produce elastomeric polyurethane products.
AMS P Polymeric Materials Committee
Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion Resistant, Medium Viscosity, Room Temperature CureAMS3373/2B (Current)1/17/2012
This specification covers an elastomeric silicone insulating and sealing compound, supplied as a two-component system. The compound may be either an addition- or a condensation-cure type.
AMS G9 Aerospace Sealing Committee
Type 16 15% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or ExtrusionsAMS3678/16A (Current)2/29/2016
This specification covers a polytetrafluoroethylene (PTFE) resin filled with 15% polyimide in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
AMS P Polymeric Materials Committee
Trace Element Control Nickel Alloy, Cobalt Alloy, and Iron Alloy Wrought Products for High-Temperature, High-Stressed ApplicationsAMS2281B (Current)1/17/2013
This specification establishes maximum permissible limits for elements not normally specified but which may occur in trace amounts in wrought nickel, cobalt, and iron alloy products.
AMS F Corrosion and Heat Resistant Alloys Committee
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90000 (621) Tensile, 40000000 (276) Modulus, 175 (347)AMS3894/14B (Current)9/13/2016
This specification covers one type of epoxy-resin-impregnated carbon fibers in the form of tape and sheet.
AMS P17 Polymer Matrix Composites Committee
Vehicle Electromagnetic Immunity - Power Line Magnetic FieldsJ551/17_201507 (Current)7/22/2015
This SAE Standard specifies the test methods and procedures for testing passenger cars and commercial vehicles to magnetic fields generated by power transmission lines and generating stations. SAE J551-1 specifies general information, definitions, practical use, and basic principles of the test procedure.
Electromagnetic Compatibility (EMC) Standards
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-III-36 - 120 (248)AMS3906/2C (Current)10/12/2016
This specification covers one type of epoxy-resin-impregnated, non-woven, glass fiber in the form of tape for hand or machine layup and of flat sheet.
AMS P17 Polymer Matrix Composites Committee
Webbing, Nylon, Integral Locking Slots 1 (25) Wide, 3000 (13,345) Breaking StrengthAMS3797/3C (Current)4/14/2015
This specification covers one width and one strength of integral locking slot nylon webbing.
AMS P Polymeric Materials Committee
Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 8700 (38,700) Breaking Strength Double Plain Weave with BinderAMS3798/7C (Current)4/14/2015
This specification covers one width and one breaking strength of low-modulus aramid webbing.
AMS P Polymeric Materials Committee
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 110000 (758) Tensile, 27000000 (186) Modulus, 175 (347)AMS3894/1C (Current)9/14/2016
This specification covers one type of epoxy-resin-impregnated carbon fibers in the form of tape and sheet.
AMS P17 Polymer Matrix Composites Committee
Yarn, Organic Fiber (Para-Aramid), High Modulus 195 Denier (215 d tex), 1.2% FinishAMS3901/8C (Current)4/30/2015
This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.
AMS P17 Polymer Matrix Composites Committee
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-I-36 - 120 (248)AMS3906/1C (Current)10/12/2016
This specification covers one type of epoxy-resin-impregnated, non-woven, glass fiber in the form of tape for hand or machine layup and of flat sheet.
AMS P17 Polymer Matrix Composites Committee
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1/2 Inch (12.5 mm), 0.06 to 0.56 Ounces per Yard (1.9 to 17.4 g/m)AMS3793/1B (Current)9/11/2013
This specification covers four classes of para-aramid tape and webbing of a single width and with varying weights.
AMS P Polymeric Materials Committee
Webbing, Nylon, Integral Locking Slots 1-1/16 (27) Wide, 8000 (35,586) Breaking StrengthAMS3797/8C (Current)4/14/2015
This specification covers one width and one strength of integral locking slot nylon webbing.
AMS P Polymeric Materials Committee
Alloy Wire, Round 35Pd - 30Ag - 14Cu - 10Au - 10Pt - 0.85Zn Solution Heat TreatedAMS7735E (Current)3/4/2018
This specification covers a palladium-silver alloy in the form of round wire 0.004 to 0.080 inch (0.10 to 2.03 mm) inclusive, in nominal diameter (see 8.5).
AMS D Nonferrous Alloys Committee
Webbing, Woven Nylon Fabric 12,000 Pounds (53,400 N), 3.3 Ounces/Yards (102.5 g/m)AMS3795/3B (Current)6/13/2016
This specification covers one strength and weight of nylon fabric in the form of webbing.
AMS P Polymeric Materials Committee
Webbing, Nylon, Integral Locking Slots 1-1/16 (27) Wide, 7000 (31,138) Breaking StrengthAMS3797/7C (Current)4/14/2015
This specification covers one width and one strength of integral locking slot nylon webbing.
AMS P Polymeric Materials Committee
Webbing, Low Modulus Aramid 1 (25) Wide, 6000 (26,689) Breaking Strength Herringbone TwillAMS3798/10C (Current)4/14/2015
This specification covers one width and one breaking strength of low-modulus aramid webbing.
AMS P Polymeric Materials Committee
Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 33 (228) Tensile ModulusAMS3892/7B (Current)12/15/2016
This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the supplier's grade or material designation.
AMS P17 Polymer Matrix Composites Committee
Items per page:
1 – 50 of 216079