J516_200507 Hydraulic Hose Fittings

Revised

07/05/2005

Features
Issuing Committee
Scope
Content
This SAE Standard provides general and dimensional specifications for the most common hose fittings used in conjunction with hydraulic hoses specified in SAE J517 and utilized in hydraulic systems on mobile and stationary equipment.
The general specifications contained in Sections 1 through 15 are applicable to all hydraulic hose fittings and supplement the detailed specifications for the 100R-series fittings contained in the later sections of this document.
This document shall be utilized as a procurement document only to the extent agreed upon by the manufacturer and user.
Refer to SAE J517 for specifications of hose and information on hose assemblies. SAE J1273 contains information on application factors affecting hose fittings, hose, and hose assemblies.
THE RATED WORKING PRESSURE OF A HOSE ASSEMBLY COMPRISING SAE J516 FITTINGS AND SAE J517 HOSE SHALL NOT EXCEED THE LOWER OF THE TWO WORKING PRESSURE RATED VALUES.
Rationale
Content
This document has been completely revised to reflect the metric system. Tables have been simplified by having only one max length per fitting/hose size combination. Also limited the number of jump sizes and drops. Added optional inch hex sizes. Added the idenification information (Paragraph 4).
The following are hose fitting types contained in this document:
  1. a
    Male dryseal pipe thread hose fittings shall be as shown in Figure 1 for the respective styles, and in Table 2 for the applicable hoses and sizes.
  2. b
    Male straight thread O-ring hose fittings shall be as shown in Figure 2 or the respective styles, and in Table 3 for the applicable hoses and sizes.
  3. c
    Male 37 degree flare hose fittings shall be as shown in Figure 3 for the respective styles, and in Table 4 for the applicable hoses and sizes.
  4. d
    Female 37 degree flare hose fittings shall be as shown in Figures 4 to 4B for the respective styles and shapes, and in Tables 5 to 5B for the applicable hoses and sizes.
  5. e
    Male 45 degree flare hose fittings shall be as shown by the 37 degree figures and tables.
  6. f
    Female 45 degree flare hose fittings shall be as shown by the 37 degree figures and tables.
  7. g
    Male flareless 24 degree cone hose fittings shall be as shown in Figure 5 and in Table 6 for the applicable hoses and sizes.
  8. h
    Female flareless 24 degree cone hose fittings shall be as shown in Figures 6 and in Table 7 for the applicable hoses and sizes.
  9. i
    4-bolt split flange hose fittings shall be as shown in Figures 7 to 7F for the respective styles and shapes, and in Tables 8 to 8F for the applicable hoses and sizes.
  10. j
    Female O-ring face seal hose fittings shall be as shown in Figures 8 to 8B for the respective styles, and Tables 9 to 9B for the applicable hoses and sizes.
It is recommended that where step sizes or additional types of fittings are required, they be designed to conform with the specifications of this document insofar as they may apply. The following general specifications shall supplement the dimensional data contained in the tables with respect to all unspecified detail.
Meta TagsDetails
DOI
https://doi.org/10.4271/J516_200507
Pages
28
Citation
SAE International Technical Standard, Hydraulic Hose Fittings, SAE Standard J516_200507, Revised July 2005, Issued January 1952, https://doi.org/10.4271/J516_200507.
Additional Details
Publisher
Published
Jul 5, 2005
Product Code
J516_200507
Content Type
Technical Standard
Status
Revised
Language
English