J2045_202411 Performance Requirements for Fuel System Tubing Assemblies

Reaffirmed

11/22/2024

Features
Issuing Committee
Scope
Content
This SAE Standard encompasses the recommended minimum requirements for non-metallic tubing and/or combinations of metallic tubing to non-metallic tubing assemblies manufactured as liquid- and/or vapor-carrying systems designed for use in gasoline, alcohol blends with gasoline, or diesel fuel systems. This SAE Standard is intended to cover tubing assemblies for any portion of a fuel system which operates above −40 °C (−40 °F) and below 115 °C (239 °F), and up to a maximum working gage pressure of 690 kPa (100 psig). The peak intermittent temperature is 115 °C (239 °F). For long-term continuous usage, the temperature shall not exceed 90 °C (194 °F). It should be noted that temperature extremes can affect assemblies in various manners and every effort must be made to determine the operating temperature to which a specific fuel line assembly will be exposed, and design accordingly.
The applicable SAE standards should be referenced when designing liquid-carrying and/or vapor-carrying systems which are described in this document.
Wherever possible or unless stated otherwise, systems tested to this document shall be in the final design intent configuration.
Meta TagsDetails
DOI
https://doi.org/10.4271/J2045_202411
Pages
16
Citation
SAE International Technical Standard, Performance Requirements for Fuel System Tubing Assemblies, SAE Standard J2045_202411, Reaffirmed November 2024, Revised November 2012, Issued October 1992, https://doi.org/10.4271/J2045_202411.
Additional Details
Publisher
Published
Nov 22
Product Code
J2045_202411
Content Type
Technical Standard
Status
Reaffirmed
Language
English