Search
Advanced Search
of the following are true
(
)

Results

Items (212,033)
Ancillary Deicing/Anti-Icing InformationAIR8468 (Current)01/10/2025
This manual contains information regarding aircraft deicing/anti-icing surfaces and areas
G-12M Methods Committee
Information Report
Superfinishing of HVOF Applied Tungsten Carbide CoatingsAMS2452 (Current)01/09/2025
This specification covers requirements for the superfinishing of High Velocity Oxygen/Fuel (HVOF) applied tungsten carbide thermal spray coatings
AMS B Finishes Processes and Fluids Committee
Material Specification
INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, FREE RUNNING, CRES, UNCOATEDMA3279D (Current)01/09/2025
E-25 General Standards for Aerospace and Propulsion Systems
Technical Standard
LEDs and Aircraft ApplicationsARP6253A (Current)01/09/2025
This document presents minimum criteria for the design and installation of LED assemblies in aircraft. The use of "shall" in this specification expresses provisions that are binding. Nonmandatory provisions use the term "should
A-20C Interior Lighting
Recommended Practice
Air in Aircraft Hydraulic SystemsAIR5829 (Current)01/09/2025
This SAE Aerospace Information Report (AIR) discusses the forms that air may take in aircraft hydraulic systems. Further, the effects of the various air forms on system operation are addressed. Recommended system design to prevent air effects and maintenance procedures to prevent and remove air are provided. Nitrogen leakage from accumulators is also a source of gas in hydraulic systems and may compose a portion of the “air” in the hydraulic system. The term “air” in this report does not differentiate between a gas composed strictly of normal atmospheric air or one that includes a mixture of additional nitrogen as well. The discussions of the report apply equally with any proportions of atmospheric air and nitrogen in the system
A-6C1 Fluids and Contamination Control Committee
Information Report
Actuators, Linear Mechanical, General Specification GuideARP5812 (Current)01/09/2025
This SAE Aerospace Recommended Practice (ARP) establishes design, manufacturing performance and test requirements for linear mechanical actuators intended to be used for linear motion applications in response to manual or automatic power control system inputs. It is applicable, but not confined to, ball screws, sliding contact screws, roller screws, helical splines, rack and pinion assemblies, and skewed roller actuators. It is a reference for preparing detail specifications for mechanical actuators compatible and applicable to military or commercial aircraft systems
A-6B3 Electro-Mechanical Actuation Committee
Recommended Practice
Method for Predicting Lateral Attenuation of Airplane NoiseAIR5662 (Current)01/09/2025
This document describes analytical methods for calculating the attenuation of the level of the sound propagating from an airplane to locations on the ground and to the side of the flight path of an airplane during ground roll, climbout after liftoff, and landing operations. Both level and non-level ground scenarios may be modeled using these methods, however application is only directly applicable to terrain without significant undulations, which may cause multiple reflections and/or multiple shielding effects. This attenuation is termed lateral attenuation and is in excess of the attenuation from wave divergence and atmospheric absorption. The methods for calculating the lateral attenuation of the sound apply to: turbofan-powered transport-category airplanes with engines mounted at the rear of the fuselage (on the sides of the fuselage or in the center of the fuselage as well as on the sides) or under the wings propeller-driven transport-category or general-aviation airplanes
A-21 Aircraft Noise Measurement Aviation Emission Modeling
Information Report
Metallic WhiskersAIR4129A (Current)01/09/2025
This AIR presents an abbreviated review of the metallurgical phenomena known as whiskers. It is not all encompassing; rather, it is intended to introduce the design engineer to the technical issues of metallic whiskers, their formation, and the potentially dangerous problems they can cause
AMS B Finishes Processes and Fluids Committee
Information Report
Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid - Membrane ProcedureARP4285A (Current)01/09/2025
This SAE Aerospace Recommended Practice (ARP) establishes a method for evaluating the particulate matter extracted from the working fluid of a hydraulic system or component using a membrane. The amount of particulate matter deposited on the membrane due to filtering a given quantity of fluid is visually compared against a standard membrane in order to provide an indication of the cleanliness level of the fluid
A-6C1 Fluids and Contamination Control Committee
Recommended Practice
Aluminum Alloy, Particulate Reinforced Extrusions 6092/Sic/25p - T6p Solution Heat Treated, Quenched, and Precipitation Heat TreatedAMS4265A (Current)07/01/2000
This specification covers particulate reinforced aluminum metal matrix composites in the form of extruded shapes. These extrusions have been used typically for structural applications requiring moderate static strength and high elastic modulus, but usage is not limited to such applications
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy, Casting, Permanent Mold 4.5 Cu, 2.5 SI (Bl 95-T4) Solution TreatedAMS4283D (Current)07/01/1981
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy, Castings, High Strength, 4.5cu 0.70ag 0.30mn 0.25mg 0.25ti, Solution and Precipitation Heat TreatedAMS4228B (Current)04/01/1996
This specification has been 'CANCELLED' by the Aerospace Materials Division, SAE, as of April 1996. Alloy: A201.0-T6 UNS Number: A12010
AMS D Nonferrous Alloys Committee
Material Specification
Steel, Corrosion- and Heat-Resistant, Welding Wire 19Cr - 13Ni - 2.5Mo High Ferrite Grade, Trace Element ControlledAMS5808D (Current)11/18/2022
This specification covers a corrosion and heat-resistant steel in the form of welding wire
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Aluminum Alloy 2219, Plate and SheetAMSQQA250/30A (Current)12/12/2013
This specification covers the specific requirements for 2219 aluminum alloy plate and sheet
AMS D Nonferrous Alloys Committee
Material Specification
Aluminum Alloy 2124, PlateAMSQQA250/29A (Current)12/12/2013
This specification covers the specific requirements for 2124 aluminum alloy plate for intended use in the -T851 temper; the general requirements are covered in AMS-QQ-A-250
AMS D Nonferrous Alloys Committee
Material Specification
Coating, Cadmium (Vacuum DepositedAMSC8837A (Current)10/22/2015
This specification covers the requirements for three types and three classes for vacuum deposited cadmium coating
AMS B Finishes Processes and Fluids Committee
Material Specification
Aluminum Alloy 7075, Bar, Rod, Shapes, Tube, and Wire, ExtrudedAMSQQA200/11A (Current)10/13/2014
This specification covers the specific requirements for aluminum alloy 7075 bar, rod, shapes, tube, and wire produced by extrusion
AMS D Nonferrous Alloys Committee
Material Specification
Sealing Compound, Sprayable For Integral Fuel Tanks and Fuel Cell Cavities, For Intermittent Use to 350 °F (177 °CAMS3279D (Current)03/12/2013
This specification covers one type of sprayable fuel resistant polythioether sealing compound supplied as a two-component system
AMS G9 Aerospace Sealing Committee
Material Specification
Test Slabs, Fluorosilicone (FVMQ) 55 - 65AMS3217/5C (Current)07/19/2013
This specification covers a standard fluorosilicone (FVMQ) rubber stock in the form of molded test slabs
AMS CE Elastomers Committee
Material Specification
STEEL PLATE, CORROSION AND MODERATE HEAT RESISTANT 15.5Cr - 4.5Ni - 2.9Mo - 0.1N Equalized and OvertemperedAMS5594 (Current)07/01/1981
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Tape and Webbing, Woven, NylonAMS3778B (Current)02/09/2012
This specification and its supplementary detail specifications cover two types of nylon tape and three types of nylon webbing
AMS P Polymeric Materials Committee
Material Specification
Cloth, Marquisette, NylonAMS3791B (Current)02/09/2012
This specification covers nylon in the form of marquisette cloth
AMS P Polymeric Materials Committee
Material Specification
Webbing, Textile, Tubular, Para-Aramid Intermediate ModulusAMS3782B (Current)02/09/2012
This specification and its supplementary detail specifications cover various types of para-aramid fabric in the form of webbing
AMS P Polymeric Materials Committee
Material Specification
Core, Polyurethane Foam (Polyether) Rigid, CellularAMS3725B (Current)02/09/2012
This specification and its supplementary detail specifications cover rigid, cellular polyurethane or polyisocyanurate (polyether only) foam in the form of board or block
AMS P Polymeric Materials Committee
Material Specification
Webbing, Woven, Nylon 2600 Pounds Force (11,565 NAMS3778/4B (Current)02/09/2012
This specification covers one type of nylon webbing
AMS P Polymeric Materials Committee
Material Specification
Rings, Sealing, Fluorocarbon Rubber General Purpose, High Temperature, Fuel and Oil Resistant 65 - 75AMS7266B (Current)11/03/2017
This specification covers a fluorosilicone rubber in the form of molded rings
AMS CE Elastomers Committee
Material Specification
Rubber: Butyl (IIR) Low Compression Set and Low Moisture/Gas Permeability 65 to 75 Type A Hardness for Seals in Desiccated or Other Systems Requiring Resistance to Gas and/or Water Vapor PermeationAMS7601 (Current)07/18/2019
This specification covers a butyl rubber in the form of molded rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications. For sheet, strip, tubing, extrusions, and molded shapes use AMS3941 specification
AMS CE Elastomers Committee
Material Specification
Test Slabs, Fluoroelastomer (FKM) 65 - 75AMS3217/4C (Current)02/23/2017
This specification covers a standard fluoroelastomer (FKM) rubber stock in the form of molded test slabs
AMS CE Elastomers Committee
Material Specification
Rubber: Butyl (IIR Abbreviation) Phosphate Ester Resistant 65 to 75 Hardness for Seals in Hydraulic Systems, etcAMS7338A (Current)07/18/2019
This specification covers a butyl rubber in the form of molded rings, compression seals, o-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications. As AMS3238 is no longer valid for O-rings. For O-rings, the requirements of AMS7338 shall be met wherever AMS3238 is specified
AMS CE Elastomers Committee
Material Specification
Insulation Sleeving, Electrical, FlexibleAMSI7444A (Current)06/05/2013
This specification covers flexible extruded, vinyl plastic tubing
AE-8D Wire and Cable Committee
Material Specification
Aluminum Alloy, Die Forgings, 5.6zn 2.5mg 1.6cu 0.23cr Solution and Precipitation Heat TreatedMAM4141B (Current)03/12/2003
This specification covers an aluminum alloy in the form of die forgings and forging stock ordered to metric (SI) units. Primarily for parts requiring good resistance to stress-corrosion cracking but with lower strength than AMS-4139
AMS D Nonferrous Alloys Committee
Material Specification
Cobalt Alloy, Corrosion and Heat Resistant, Hardfacing Rod and Wire 62Co - 27Cr - 2.9Ni - 5.5MoAMS5819A (Current)04/30/2019
This specification covers a corrosion and heat-resistant cobalt alloy in the form of welding rods or wrought wire
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Coating, Interior Aircraft Cabin Low Heat and Smoke ReleaseAMS3146 (Current)09/01/2000
This specification covers interior aircraft cabin coatings, which when tested under specified conditions exhibit low heat release and smoke release properties
AMS G8 Aerospace Organic Coatings Committee
Material Specification
Epoxy Resin Matrix, Thermosetting Moderate Temperature Resistant, UnfilledAMS3729A (Current)10/04/2022
This specification covers a heat-reactive, thermosetting, epoxy resin matrix in the form of a semi-solid. The resin matrix thermally cures to an epoxy polymer
AMS P17 Polymer Matrix Composites Committee
Material Specification
Sandwich Structures, Glass Fabric-Resin Low Pressure Molded, Heat ResistantAMS3710C (Current)12/29/2022
This specification covers a resin-impregnated glass fabric honeycomb core in the form of flat or contoured sandwich structures
AMS P17 Polymer Matrix Composites Committee
Material Specification
Remover, Epoxy Paint Acid-Type, ThickenedAMS1376B (Current)08/23/2018
This specification covers a paint remover in the form of a liquid
AMS J Aircraft Maintenance Chemicals and Materials Committee
Material Specification
Potting Compound, Epoxy Bisphenol A-Type Filled, Heat Cure, MachinableAMS3731/3C (Current)09/22/2016
This specification covers an epoxy resin formulation with fillers such as calcium carbonate, supplie as a two-component system, requiring an oven cure for attainment of maximum properties
AMS P Polymeric Materials Committee
Material Specification
Case Hardening of Titanium and Titanium AlloysAMS2775C (Current)10/22/2015
This specification covers the engineering requirements for producing a carbon-oxygen-nitrogen-bearing case on titanium and titanium alloys by means of a molten salt bath, and the properties of the case
AMS B Finishes Processes and Fluids Committee
Material Specification
Potting Compound, Epoxy Bisphenol A-TypeAMS3731C (Current)09/22/2016
This specification and its supplementary detail specifications cover epoxy resin formulations based on diglycidyl ether of bisphenol A with an epoxide equivalent of 175-195. When properly mixed and cured, these resisns produce a rigid or flexible product
AMS P Polymeric Materials Committee
Material Specification
Potting Compound, Epoxy Bisphenol A-Type Filled, Room Temperature Cure, Low ShrinkageAMS3731/7C (Current)09/22/2016
This specification covers a filled, room-temperature-polymerizing epoxy resin formulation, supplied as a two-component system
AMS P Polymeric Materials Committee
Material Specification
Tape, Low Modulus Aramid 2 (51), 1000 (4448) Breaking StrengthAMS3792/2B (Current)02/09/2012
This specification covers one weight of low-modulus aramid tape
AMS P Polymeric Materials Committee
Material Specification
Tape, Low Modulus Aramid 2 (51), 3000 (13,345) Breaking StrengthAMS3792/3B (Current)02/09/2012
This specification covers one weight of low-modulus aramid tape
AMS P Polymeric Materials Committee
Material Specification
Acrylonitrile Butadiene (NBR) Rubber Hot Oil Resistant, Low Swell 75 - 85AMS3229K (Current)01/03/2020
This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes
AMS CE Elastomers Committee
Material Specification
Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant, Low Swell 55 - 65AMS3227J (Current)01/03/2020
This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes
AMS CE Elastomers Committee
Material Specification
350 °F Autoclave Cure, Low Flow Toughened Epoxy Prepregs, Type 38, Class 2, Grade 193, Style 3K-70-PW, Fiber 1AMS3961/1 (Current)12/02/2015
The intent of this specification is for the procurement of the material listed on the QPL and, therefore, no qualification or equivalency threshold values are provided. Users that intend to conduct a new material qualification or equivalency program shall refer to the Quality Assurance section of the base specification, AMS3961. All material qualification and equivalency data has been archived and is available for review upon request. Contact the CMH-17 Secretariat (www.cmh17.org) for additional information
AMS P17 Polymer Matrix Composites Committee
Material Specification
Core, Honeycomb, Glass/Phenolic Bias Weave Fiber ConstructionAMS3716C (Current)08/10/2022
This specification covers expanded honeycomb core made from glass fabric impregnated with phenolic resin and oriented so the fabric weave is on the 45-degree bias with the ribbon direction and supplied in the form of blocks, slices, and ordered shapes
AMS P17 Polymer Matrix Composites Committee
Material Specification
Steel Bars, Forgings, Tubing, and Rings 1.3Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28CAMS6418H (Current)09/01/2000
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, flash welded rings, and stock for forging and flash welded rings
AMS E Carbon and Low Alloy Steels Committee
Material Specification
Cobalt Alloy, Corrosion- and Heat-Resistant, Hard Facing Rods and Wire 62Co - 29Cr - 4.5W - 1.2CAMS5788G (Current)05/16/2023
This specification covers a corrosion and heat-resistant cobalt alloy in the form of welding rods, coating rods, or wrought wire
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Plating, Brush, Zinc-Nickel Low Hydrogen EmbrittlementAMS2451/9C (Current)05/24/2023
This specification covers the requirements for brush plating of zinc-nickel by electrodeposition
AMS B Finishes Processes and Fluids Committee
Material Specification
Rings, Flash Welded Ferritic and Martensitic Corrosion-Resistant SteelsAMS7493L (Current)07/31/2019
This specification covers flash welded rings made of ferritic and martensitic corrosion-resistant steels
AMS F Corrosion and Heat Resistant Alloys Committee
Material Specification
Items per page:
1 – 50 of 212033