This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Hydraulic Hose Fittings
- Ground Vehicle Standard
- J516_201604
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Standard provides general and dimensional specifications for the most common hose fittings used in conjunction with hydraulic hoses specified in SAE J517 and utilized in hydraulic systems on mobile and stationary equipment.
The general specifications contained in Sections 1 through 15 are applicable to all hydraulic hose fittings and supplement the detailed specifications for the 100R-series fittings contained in the later sections of this document.
This document shall be utilized as a procurement document only to the extent agreed upon by the manufacturer and user.
Refer to SAE J517 for specifications of hose and information on hose assemblies. SAE J1273 contains information on application factors affecting hose fittings, hose, and hose assemblies.
THE RATED WORKING PRESSURE OF A HOSE ASSEMBLY COMPRISING SAE J516 FITTINGS AND SAE J517 HOSE SHALL NOT EXCEED THE LOWER OF THE TWO WORKING PRESSURE RATED VALUES.
The following are hose fitting types contained in this document:
Male and female 45° flare hose fittings shall be as shown by the 37° flare figures and tables.
It is recommended that where step sizes or additional types of fittings are required, they be designed to conform with the specifications of this document insofar as they may apply. The following general specifications shall supplement the dimensional data contained in the tables with respect to all unspecified detail.
Rationale
This revision of SAE J516 is a complete rewrite that divides the standard into sections by hose fitting types. The section numbers will match similar parts of ISO 12151, wherever applicable. In addition, the optional inch hex sizes for all hose fittings were removed from all Tables and moved to Appendix D, and the Finish clause was changed to Corrosion Protection with updated requirements.
Recommended Content
| Ground Vehicle Standard | Hydraulic Hose Fittings |
| Ground Vehicle Standard | Formed Tube Ends for Hose Connections and Hose Fittings |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| Unnamed Dataset 3 | ||
| Table 1 | Pipe thread dimensions | |
| Table 2 | Dimensions of male O-Ring Face Seal straight hose fittings | |
| Table 3 | Dimensions of female O-Ring Face Seal swivel straight hose fittings | |
| Table 4 | dimensions of female O-Ring Face Seal swivel 45° elbow hose fittings | |
| Table 5 | Dimensions of female O-Ring Face Seal swivel 90° elbow hose fittings | |
| Table 6 | Dimension of male O-Ring Face Seal straight bulkhead hose fittings | |
| Table 7 | Dimensions of male flareless 24° cone straight hose fittings | |
| Table 8 | Dimensions of female flareless 24° cone swivel straight hose fittings | |
| Table 9 | Dimensions of 4-bolt split flange straight hose fittings | |
| Table 10 | Dimensions of 4-Bolt split flange 22 1/2° elbow hose fittings | |
| Table 11 | Dimensions of 4-Bolt split flange 30° elbow hose fittings | |
| Table 12 | Dimensions of 4-Bolt split flange 45° elbow hose fittings | |
| Table 13 | Dimensions of 4-Bolt split flange 60° elbow hose fittings | |
| Table 14 | Dimensions of 4-Bolt split flange 67 1/2° elbow hose fittings | |
| Table 15 | Dimensions of 4-Bolt split flange 90° elbow hose fittings | |
| Table 16 | Dimensions of male straight thread O-Ring hose fittings | |
| Table 17 | Dimensions of male 37° flare straight hose fittings | |
| Table 18 | Dimensions of female 37° flare swivel straight hose fittings | |
| Table 19 | Dimensions of female 37° flare swivel 45° elbow hose fittings | |
| Table 20 | Female 37° flare swivel 90° elbow hose fittings | |
| Table 21 | Dimensions of male dryseal pipe thread hose fittings | |
| Table 22 | Hex width | |
| Table 23 | New VS old codes interchange | |
| Table 24 | Optional inch hex sizes |
Issuing Committee
Hydraulic Hose and Hose Fittings Committee
The Hydraulic Hose and Hose Fittings Subcommittee of the FCCTC develops and maintains SAE Standards, Recommended Practices and Information Reports relating to hydraulic hose and hose fittings with an intended use in pressure applications. Participants in the FCCTC Hydraulic Hose and Hose Fittings Subcommittee include OEMs, suppliers, consulting firms, government and other interested parties.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.