This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Hydraulic Hose Fittings
- Ground Vehicle Standard
- J516_201110
- Revised
Downloadable datasets available
Annotation ability available
Sector:
Issuing Committee:
Language:
English
Scope
This SAE Standard provides general and dimensional specifications for the most common hose fittings used in conjunction with hydraulic hoses specified in SAE J517 and utilized in hydraulic systems on mobile and stationary equipment.
The general specifications contained in Sections 1 through 15 are applicable to all hydraulic hose fittings and supplement the detailed specifications for the 100R-series fittings contained in the later sections of this document.
This document shall be utilized as a procurement document only to the extent agreed upon by the manufacturer and user.
Refer to SAE J517 for specifications of hose and information on hose assemblies. SAE J1273 contains information on application factors affecting hose fittings, hose, and hose assemblies.
THE RATED WORKING PRESSURE OF A HOSE ASSEMBLY COMPRISING SAE J516 FITTINGS AND SAE J517 HOSE SHALL NOT EXCEED THE LOWER OF THE TWO WORKING PRESSURE RATED VALUES.
The following are hose fitting types contained in this document:
-
a
Male dryseal pipe thread hose fittings shall be as shown in Figure 2 for the respective styles, and in Table 2 for the applicable hoses and sizes.
-
b
Male straight thread O-ring hose fittings shall be as shown in Figure 3 or the respective styles, and in Table 3 for the applicable hoses and sizes.
-
c
Male 37° flare hose fittings shall be as shown in Figure 4 for the respective styles, and in Table 4 for the applicable hoses and sizes.
-
d
Female 37° flare hose fittings shall be as shown in Figures 5 to 5B for the respective styles and shapes, and in Tables 5 to 5B for the applicable hoses and sizes.
-
e
Male 45° flare hose fittings shall be as shown by the 37° figures and tables.
-
f
Female 45° flare hose fittings shall be as shown by the 37° figures and tables.
-
g
Male flareless 24° cone hose fittings shall be as shown in Figure 6 and in Table 6 for the applicable hoses and sizes.
-
h
Female flareless 24° cone hose fittings shall be as shown in Figure 7 and in Table 7 for the applicable hoses and sizes.
-
i
4-bolt split flange hose fittings shall be as shown in Figures 8 to 8F for the respective styles and shapes, and in Tables 8 to 8F for the applicable hoses and sizes.
-
j
Male O-ring face seal hose fittings shall be as shown in Figure 9 for the respective styles, and in Table 9 for the applicable hoses and sizes.
-
k
Female O-ring face seal hose fittings shall be as shown in Figures 10 to 10B for the respective styles, and Tables 10 to 10B for the applicable hoses and sizes.
It is recommended that where step sizes or additional types of fittings are required, they be designed to conform with the specifications of this document insofar as they may apply. The following general specifications shall supplement the dimensional data contained in the tables with respect to all unspecified detail.
Rationale
This document has been revised to add the bulkhead o-ring face seal fittings in Figure 11. Also, the Part Identification Number (PIN) in figures 10A and 10B as well as tables 10A and 10B have been corrected.
In an effort to standardize within a global market and ensuring that companies can remain competitive in an international market, it is the intent to convert to metric hex sizes which will:
-
–
lead to one global system
-
–
guide users to preferred system
-
–
reduce complexity
-
–
eliminate duplications
The optional inch hexes now contain the note “NOT TO BE USED FOR NEW DESIGN” in accordance with the Metric Hex Resolution approved during the March 2008 FCCTC meeting.
Recommended Content
| Ground Vehicle Standard | Formed Tube Ends for Hose Connections and Hose Fittings |
| Ground Vehicle Standard | Hydraulic Hose Fittings |
Topic
Data Sets - Support Documents
| Title | Description | Download |
|---|---|---|
| Unnamed Dataset 1 | ||
| Unnamed Dataset 2 | ||
| TABLE 1 | PIPE THREAD DIMENSIONS | |
| TABLE 2 | DIMENSIONS OF MALE DRYSEAL PIPE THREAD HOSE FITTINGS | |
| TABLE 3 | DIMENSIONS OF MALE STRAIGHT THREAD O-RING HOSE FITTINGS | |
| TABLE 4 | DIMENSIONS OF MALE 37° FLARE STRAIGHT HOSE FITTINGS | |
| TABLE 5 | DIMENSIONS OF FEMALE 37° FLARE SWIVEL STRAIGHT HOSE FITTINGS | |
| TABLE 5A | DIMENSIONS OF FEMALE 37° FLARE SWIVEL 45° ELBOW HOSE FITTINGS | |
| TABLE 5B | FEMALE 37° FLARE SWIVEL 90° ELBOW HOSE FITTINGS | |
| TABLE 6 | DIMENSIONS OF MALE FLARELESS 24° CONE STRAIGHT HOSE FITTINGS | |
| TABLE 7 | DIMENSIONS OF FEMALE FLARELESS 24° CONE SWIVEL STRAIGHT HOSE FITTINGS | |
| TABLE 8 | DIMENSIONS OF 4-BOLT SPLIT FLANGE STRAIGHT HOSE FITTINGS | |
| TABLE 8A | DIMENSIONS OF 4-BOLT SPLIT FLANGE 22 1/2° ELBOW HOSE FITTINGS | |
| TABLE 8B | DIMENSIONS OF 4-BOLT SPLIT FLANGE 30° ELBOW HOSE FITTINGS | |
| TABLE 8C | DIMENSIONS OF 4-BOLT SPLIT FLANGE 45° ELBOW HOSE FITTINGS | |
| TABLE 8D | DIMENSIONS OF 4-BOLT SPLIT FLANGE 60° ELBOW HOSE FITTINGS | |
| TABLE 8E | DIMENSIONS OF 4-BOLT SPLIT FLANGE 67 1/2° ELBOW HOSE FITTINGS | |
| TABLE 8F | DIMENSIONS OF 4-BOLT SPLIT FLANGE 90° ELBOW HOSE FITTINGS | |
| TABLE 9 | DIMENSIONS OF MALE O-RING FACE SEAL STRAIGHT HOSE FITTINGS | |
| TABLE 10 | DIMENSIONS OF FEMALE O-RING FACE SEAL SWIVEL STRAIGHT HOSE FITTINGS | |
| TABLE 10A | DIMENSIONS OF FEMALE O-RING FACE SEAL SWIVEL 45° ELBOW HOSE FITTINGS | |
| TABLE 10B | DIMENSIONS OF FEMALE O-RING FACE SEAL SWIVEL 90° ELBOW HOSE FITTINGS | |
| TABLE 11 | DIMENSION OF MALE O-RING FACE SEAL STRAIGHT BULKHEAD HOSE FITTINGS | |
| TABLE A1 | HEX WIDTH | |
| TABLE C1 | NEW VS OLD CODES INTERCHANGE |
Issuing Committee
Hydraulic Hose and Hose Fittings Committee
The Hydraulic Hose and Hose Fittings Subcommittee of the FCCTC develops and maintains SAE Standards, Recommended Practices and Information Reports relating to hydraulic hose and hose fittings with an intended use in pressure applications. Participants in the FCCTC Hydraulic Hose and Hose Fittings Subcommittee include OEMs, suppliers, consulting firms, government and other interested parties.
Reference
* Redlines comparisons are available for those standards
listed in the Revision History that contain a radio button. A
redline comparison of the current version against a revision is
accomplished by selecting the radio button next to the standard and
then selecting 'compare'. At this time, Redline versions only exist
for some AMS standards. SAE will continue to add redline versioning
with ongoing updates to SAE MOBILUS.