This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Hybrid Combustion Control Strategy for Heavy Duty Diesel Engines Based on the Technologies of Multi-Pulse Injections, Variable Boost Pressure and Retarded Intake Valve Closing Timing
Technical Paper
2011-01-1382
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Combustion control strategy for high efficiency and low emissions in a heavy duty (H D) diesel engine was investigated experimentally in a single cylinder test engine with a common rail fuel system, EGR (Exhaust Gas Recirculation) system, boost system and retarded intake valve closing timing actuator. For the operation loads of IMEPg (Gross Indicated Mean Effective Pressure) less than 1.1 MPa the low temperature combustion (LTC) with high rate of EGR was applied. The fuel injection modes of either single injection or multi-pulse injections, boost pressure and retarded intake valve closing timing (RIVCT) were also coupled with the engine operation condition loads for high efficiency and low emissions. A higher boost pressure played an important role in improving fuel efficiency and obtaining ultra-low soot and NOx emissions.
Recommended Content
Authors
Topic
Citation
Yu, W., Liu, B., Li, Y., Su, Q. et al., "A Hybrid Combustion Control Strategy for Heavy Duty Diesel Engines Based on the Technologies of Multi-Pulse Injections, Variable Boost Pressure and Retarded Intake Valve Closing Timing," SAE Technical Paper 2011-01-1382, 2011, https://doi.org/10.4271/2011-01-1382.Also In
References
- Onishi, S. Jo, S-H. Shoda, K. Jo, P-D. Kato, S. “Active Thermo-Atmosphere Combustion (ATAC) - A New Combustion Process for Internal Combustion Engines,” SAE Technical Paper 790501 1979 10.4271/790501
- Ryan, T.W. III Callahan, T.J. “Homogeneous Charge Compression Ignition of Diesel Fuel,” SAE Technical Paper 961160 1996 10.4271/961160
- Gray, A.W. Ryan, T.W. III “Homogeneous Charge Compression Ignition (HCCI) of Diesel Fuel,” SAE Technical Paper 971676 1997 10.4271/971676
- Takeda, Y Keiichi, N. Keiichi, N. “Emission Characteristics of Premixed Lean Diesel Combustion with Extremely Early Staged Fuel Injection,” SAE Technical Paper 961163 1996 10.4271/961163
- Nakagome, K. Shimazaki, N. Miimura, K. Kobayashi, S. “Combustion and Emissions Characteristics of Premixed Lean Diesel Combustion Engine,” SAE Technical Paper 970898 1997 10.4271/970898
- Dronniou, N. Lejeune, M. Higelin, P. Balloul, I. “Combination of High EGR Rates and Multiple Injection Strategies to Reduce Pollutant Emissions,” SAE Technical Paper 2005-01-3726 2005 10.4271/2005-01-3726
- Hardy, W.L. Reitz, R.D. “An Experimental Investigation of Partially Premixed Combustion Strategies Using Multiple Injections in a Heavy-Duty Diesel Engine,” SAE Technical Paper 2006-01-0917 2006 10.4271/2006-01-0917
- Kim, MY Lee, CS Effect of a narrow fuel spray angle and a dual injection configuration on the improvement of exhaust emissions in a HCCI diesel engine Fuel 2007 86 17-18 2871 80
- Murata, Y Kusaka, J. Daisho, Y Kawano, D. et al. “Miller-PCCI Combustion in an HSDI Diesel Engine with VVT SAE Int. J. Engines 1 1 444 456 2008 10.4271/2008-01-0644
- Su, W. Lin, T. Pei, Y. “A Compound Technology for HCCI Combustion in a DI Diesel Engine Based on the Multi-pulse Injection and the BUMP Combustion Chamber,” SAE Technical Paper 2003-01-0741 2003 10.4271/2003-01-0741
- Su, Wanhua Zhang, Xiaoyu Lin, Tiejian Pei, Yiqiang Zhao, Hua Effects of Heat Release Mode on Emissions and Efficiency of a Compound Homogeneous Charge Compression Ignition Combustion Engine Journal of Engineering for Gas Turbines and Power, ASME 128 2 2006
- Su, Wanhua Liu, Bin Wang, Hui Huang, Haozhong Effects of Multi-injection Mode on HCCI Diesel Combustion ASME. Journal of Engineering for Gas Turbines and Power 129 1 2007
- Zhang, X. Su, W. Pei, Y “Mixing-enhanced Combustion in the Circumstances of Diluted Combustion in Direct-injection Diesel Engine,” SAE Technical Paper 2008-01-0009 2008 10.4271/2008-01-0009
- Kweon, C-B. Foster, D.E. Shibata, G. “The Effects of Oxygenate and Gasoline-Diesel Fuel Blends on Diesel Engine Emissions,” SAE Technical Paper 2000-01-1173 2000 10.4271/2000-01-1173
- Kokjohn, S.L. Hanson, R.M. Splitter, D.A. Reitz, R.D. “Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending,” SAE Int. J. Engines 2 1 24 39 2009 10.4271/2009-01-2647
- Zhong, S. Wyszynski, M.L. Megaritis, A. Yap, D. Xu, H. “Experimental Investigation into HCCI Combustion Using Gasoline and Diesel Blended Fuels,” SAE Technical Paper 2005-01-3733 2005 10.4271/2005-01-3733
- Su, W. Lin, T. Zhao, H. Pei, Y 2005 “Research and Development of an Advanced Combustion System for the Direct Injection Diesel Engine,” Proc. Inst. Mech. Eng., Part D (J. Automob. Eng.) 219 241 252
- Su, W. Zhang, X. Lin, T Pei, Y Zhao, H. 2004 “Study of Pulse Spray, Heat Release, Emissions and Efficiencies in A Compound Diesel HCCI Combustion Engine,” ASME Paper No. ICEF2004-927
- Su, W. Wang, H. Liu, B. “Injection Mode Modulation for HCCI Diesel Combustion,” SAE Technical Paper 2005-01-0117 2005 10.4271/2005-01-0117
- Wang, H. Su, W. Liu, B. 2005 “Study of Characteristics of Premixed Diesel Combustion and Emissions Based on Modulated Multi-Pulse Injection Modes,” Trans. CSICE 23 4 289 296
- Su, W. Huang, H. 2005 “Development and Calibration of a Reduced Chemical Kinetic Model of n-Heptane for HCCI Engine Combustion,” Fuel 84 1029 1040
- Heywood, J.B. “Internal Combustion Engine Fundamentals” Mcgraw-Hill New York 1988
- Kim, M. Kong, S-C. Reitz, R.D. “Modeling Early Injection Processes in HSDI Diesel Engines,” SAE Technical Paper 2006-01-0056 2006 10.4271/2006-01-0056
- Su, W. Lu, Y Yu, W. Wang, C et al. “High Density-Low Temperature Combustion in Diesel Engines Based on Technologies of Variable Boost Pressure and Intake Valve Closing Timing,” SAE Technical Paper 2009-01-1911 2009 10.4271/2009-01-1911