Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Multi-Zone DI Diesel Spray Combustion Model for Thermodynamic Simulation of Engine with PCCI and High EGR Level

Journal Article
2009-01-1956
ISSN: 1946-3936, e-ISSN: 1946-3944
DOI: https://doi.org/10.4271/2009-01-1956
Published June 15, 2009 by SAE International in United States
Multi-Zone DI Diesel Spray Combustion Model for Thermodynamic Simulation of Engine with PCCI and High EGR Level
Sector:
Citation: Kuleshov, A., "Multi-Zone DI Diesel Spray Combustion Model for Thermodynamic Simulation of Engine with PCCI and High EGR Level," SAE Int. J. Engines 2(1):1811-1834, 2009, https://doi.org/10.4271/2009-01-1956.
Language: English

References

  1. Kuleshov, A.S. Use of Multi-Zone DI Diesel Spray Combustion Model for Simulation and Optimization of Performance and Emissions of Engines with Multiple Injection. 2006 SAE Paper No 2006-01-1385
  2. Kuleshov, A.S. Multi-Zone DI Diesel Spray Combustion Model and its application for Matching the Injector Design with Piston Bowl Shape. 2007 SAE Paper No 2007-01-1908
  3. Kuleshov A. Mahkamov K. Multi-zone diesel fuel spray combustion model for the simulation of a diesel engine running on biofuel Proc. Mechanical Engineers 222 Part A, Journal of Power and Energy 2008 309 321
  4. Zeldovich Ya.B. Raizer Yu.P. “Physics of shock waves and high-temperature hydrodynamic phenomena” Moscow Nauka 686 1966
  5. Zvonov V.A. “Internal combustion engines toxicity” Moscow Mashinostroenie 200 1973
  6. Razleytsev N.F. “Combustion simulation and optimization in diesels” Kharkov Vischa shkola 169 1980
  7. Miller J.A. Bowman C.T. Mechanism and modeling of nitride. Chemistry in Combustion Prog. Energy Combustion Science. 1989 15 287 338
  8. Bochkov M.V. Lovachev L.A. Hvisevich S.N. Formation of the Nitrogen Ox-ide (NO) at Laminar Flame Propagation in the Homogeneous Air-Methane Mixture FGV 34 1998 No 1
  9. Bochkov M.V. Lovachev L.A. Hvisevich S.N. Numerical Modeling the NOx Formation at Air-Methane Mixture Combustion at Condition of Coupled Processes of Chemistry Kinetic and Molecules Diffusion Mathematical Modeling. 1997 No3. – 9 13 28
  10. Kamimoto, T. Kobayashi, H. Matsuoka, S. “A Big Size Rapid Compression Machine for Fundamental Studies of Diesel Combustion” SAE Paper 811004 , SAE Trans. 90 1981
  11. Reitz, R.D. Bracco, F.V. “On the dependence of Spray Angle and Other Spray Parameters on Nozzle Design and Operating Conditions” SAE paper 790494 1979
  12. Bracco, F.V. “Modeling of Engine Sprays” SAE Paper No 850394 1985
  13. Kuo, T.W. Bracco, F.V. “Computations of Drop Sizes in Pulsating Sprays and of Liquid-Core Length in Vaporizing Sprays” SAE Paper No 820133 , SAE Trans. 91 1982
  14. Kaluzhin S.A. Romanov S.A. Sviridov Yu.B. “Experimental investigation into velocities of liquid and gaseous phases in diesel fuel flame” Dvigatelestroenie No. 7 5 8 1980
  15. Lyn, W.T. “Study of Burning Rate and Nature of Combustion in Diesel Engines” Proceedings of Ninth International Symposium on Combustion 1069 1082 The Combustion Institute 1962
  16. Heywood, J.B. Internal Combustion Engine Fundamentals McGraw-Hill New York 1988
  17. Dragunov G.D. Egorov V.V. “Some peculiarities of fuel moving along the combustion chamber surface” Izv. Vuzov, Mashinostroenie No. 1 119 122 1977
  18. Egorov V.V. “Investigation into peculiarities of fuel evaporation and working cycle in boosting the tractor diesel with the CNIDI combustion chamber” Leningrad 1978
  19. Ivanchenko N.N. Semenov B.N. Sokolov V.S. “Working process in diesels with piston bowl” Leningrad, Mashinostroenie 228 1972
  20. Novoselov V.D. “Investigation into working process of four-stroke diesels based on ChN26/26 engines with mean effective pressure above 20 kg/cm 2 with limitations on maximum combustion pressure” Leningrad 1978
  21. Semenov B.N. “Theoretical and experimental fundamentals of applying fuels with various physical and chemical properties in high-speed diesels” Leningrad 1978
  22. Sokolov S.S. Demidova N.I. Safonov V.K. “Increase of diesel reliability by optimization of combustion chamber” Energomashinostroenie No. 2 12 14 1973
  23. Semenov B.N. Pavlov E.P. “Investigation and development of volume and film fuel-air mixing in diesels” Energomashinostroenie No. 1 7 10 1978
  24. Balles, E. “Fuel-Air Mixing and Diesel Combustion in a rapid Compression Machine” Department of Mechanical Engineering, MIT June 1987
  25. Gavrilov V.V. “Methods increasing quality of fuel-air mixing and combustion in a marine diesel based on mathematical and physical simulation of local intracylinder processes” Saint Petersburg StPb SMTU 2004
  26. Lyshevsky A.S. “Fuel atomization in marine diesels” Leningrad 248 1971
  27. Kuo, T.W. Bracco, F.V. “On the Scaling of Transient Laminar, Turbulent and Spray Jets” SAE Paper No. 820038 1982
  28. Hiroyasu, H. Kadota, T Arai, M. “Supplementary Comments: Fuel Spray Characterization in Diesel Engines” Combustion Modeling in Reciprocating Engines Mattavi, J.N. Amann, C.A. 369 408 Plenum Press N.Y. 1980
  29. Arregle, J. Pastor, J.V. Ruiz, S. The Influence of Injection Parameters on Diesel Spray Characteristics SAE Paper No. 1999-01-0200 1999
  30. Pastor, J.V. Encabo, E. Ruiz, S. New Modelling Approach for Fast Online Calculations In Sprays 2000 SAE Paper No. 2000-01-0287
  31. Larmi, M. Rantanen, P. Tiainen, J. Kiijarvi, J. Tanner, F.X. Stalsberg-Zarling, K. Simulation of Non-Evaporating Diesel Sprays and Verification with Experimental Data 2002 SAE Paper No. 2002-01-0946
  32. Nakagawa, H. Oda, Y. Kato, S. Nakashima, M Tateishi, M. Fuel Spray Motion in Side Injection Combustion System for Diesel Engines Proceedings of the International Symposium COMODIA 90 1990 281 286
  33. Reitz, R. D. Bracco, F. B. On the Dependence of Spray Angle and Other Spray Parameters on Nozzle Design and Operating Conditions SAE Paper 790494 1979
  34. Dan T. The Turbulent Mechanism and Structure of Diesel Spray Toshisya University 1996
  35. Jung Dohoy Assanis Dennis N. Multi-zone DI Diesel Spray Combustion Model for Cycle Simulation Studies of Engine Performance and Emissions SAE Paper No 2001-01-1246 2001
  36. Hiroyasu, H. Arai, M. Fuel Spray Penetration and Spray Angle of Diesel Engines Trans. of JSAE 21 1980 5 11
  37. Sviridov Yu.B. Malyavsky L.V. Vihert M.M. “Fuel and fuel supply in automotive diesels” Leningrad 224 1972
  38. Tolstov A.I. Indicated period of ignition lag and dynamic of cycle of high speed engine with compression ignition. Tr. NILD “Research of working cycle and fuel supply in the high speed diesels” 1955 5 55
  39. Bakenhus Marco Reitz Rolf D. “Two-Color Combustion Visualization of Single and Split Injections in a Single-Cylinder Heavy-Duty D.I. Diesel Engine Using an Endoscope-Based Imaging System” SAE Paper No. 1999-01-1112 1999
  40. Kwon, Soon-Ik Arai, Masataka Hiroyasu Hiroyuki “Ignition Delay of a Diesel Spray Injected Into a Residual Gas Mixture” SAE Paper No. 911841 1991
  41. Schneider W. Stockli M. Lutz T. Eberle M. Hochdruckeinspritzung und Abgasrezirkulation im kleinen, schnellaufenden Dieselmotor mit direkter Einspritzung MTZ 11 1993 588 599
  42. Akagawa Hisashi Miyamoto Takeshi Harada Akira Sasaki Satoru Shimazaki Naoki Hashizume Takeshi Tsujimura Kinji “Approaches to solve problems of the premixed lean diesel combustion” SAE Pap No 1999-01-0183 1999 13
  43. Harada Akira Shimazaki Naoki Sasaki Satoru Miyamoto Takeshi Akagawa Hisashi Tsujimura Kinji “The Effect of Mixture Formation on Premixed Lean Diesel Combustion Engine” SAE Pap No 980533 1998 10
  44. Nishijima Yoshiaki Asaumi Yasuo Aoyagi Yuzo “Premixed lean diesel combustion (PREDIC) using impingement spray system” Sae Pap No 2001-01-1892 2001 9
  45. Wartsila Technology review http://www.wartsila.com/Wartsila/global/docs/en/ship_power/media_publications/brochures/product/engines/w46_tr.pdf
  46. He, X. Donovan, M.T. Zigler, B.T. Palmer, T.R. Walton, S.M. Wooldridge, M.S. Atreya A. “An Experimental and modeling study of iso-octane ignition delay times under homogeneous charge compression ignition conditions”//” Combustion and Flame 142 2005 266 275
  47. Hardenberg H.O. Hase F.W. Empirical Formula for Computing the Pressure Rise Delay of a Fuel from its Cetane Number and from the Relevant Parameters of Direct-Injection Diesel Engines SAE Paper 790493 1979
  48. Neely Gary D. Sasaki Shizuo Leet Jeffrey A. “Experimental investigation of PCCI-DI combustion on emissions in a light-duty diesel engine” SAE Pap No 2004-01-0121 2004 11
  49. Inagaki, Kazuhisa Fuyuto, Takayuki Nishikawa, Kazuaki Nakakita, Kiyomi Sakata Ichiro “Combustion System with Premixture-controlled Compression Ignition” Research Report R&D Review of Toyota CRDL 41 No 3 2006 35 46
  50. Su Wanhua Lin Tiejian Pei Yiqiang “A compound technology for HCCI combustion in a DI diesel engine based on the multi-pulse injection and the BUMP combustion chamber” SAE Pap No 2003-01-0741 2003 10
  51. Hasegawa Ryo Yanagihara Hiromichi “HCCI combustion in DI diesel engine” SAE Pap No 2003-01-0745 2003 8
  52. http://www.diesel-rk.bmstu.ru
  53. Kuleshov: A.S. “Model for predicting air-fuel mixing, combustion and emissions in DI diesel engines over whole operating range” SAE Paper No 2005-01-2119 2005
  54. http://www.iosotech.com

Cited By

Recommended Content

Technical Paper Use of an Engine Simulation to Study Low Heat Rejection (LHR) Concepts in a Multi-Cylinder Light-Duty Diesel Engine
Journal Article Detailed Characterization of Negative Valve Overlap Chemistry by Photoionization Mass Spectroscopy
Technical Paper Effects of Injector Spray Layout and Injection Strategy on Gas Mixture Quality of Gasoline Direct Injection Engine