This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Investigation of Distribution and Structure of Surface Textures on Improving Tribological Properties of an Engine

Journal Article
03-15-03-0019
ISSN: 1946-3936, e-ISSN: 1946-3944
Published September 17, 2021 by SAE International in United States
Investigation of Distribution and Structure of Surface Textures on
                    Improving Tribological Properties of an Engine
Sector:
Citation: Hua, W., Nguyen, V., and Jiao, R., "Investigation of Distribution and Structure of Surface Textures on Improving Tribological Properties of an Engine," SAE Int. J. Engines 15(3):381-392, 2022, https://doi.org/10.4271/03-15-03-0019.
Language: English

References

  1. Vassallo , A. , Beatrice , C. , Di Blasio , G. , Belgiorno , G. et al. The Key Role of Advanced, Flexible Fuel Injection Systems to Match the Future CO2 Targets in an Ultra-Light Mid-Size Diesel Engine SAE Technical Paper 2018-37-0005 2018 https://doi.org/10.4271/2018-37-0005
  2. Di Blasio , G. , Beatrice , C. , Ianniello , R. , Pesce , F. et al. Balancing Hydraulic Flow and Fuel Injection Parameters for Low-Emission and High-Efficiency Automotive Diesel Engines SAE Int. J. Adv. & Curr. Prac. in Mobility 2 2 2020 638 652 https://doi.org/10.4271/2019-24-0111
  3. Finesso , R. , Marello , O. , Spessa , E. , Yang , Y. et al. Model-Based Control of BMEP and NOx Emissions in a Euro VI 3.0L Diesel Engine SAE Int. J. Engines 10 5 2017 2288 2304 https://doi.org/10.4271/2017-24-0057
  4. Finesso , R. , Hardy , G. , Mancarella , A. et al. Real-Time Simulation of Torque and Nitrogen Oxide Emissions in an 11.0 L Heavy-Duty Diesel Engine for Model-Based Combustion Control Energies 12 3 2019 460
  5. Polóni , M. and Chríbik , A. Low-Energy Synthesis Gases from Waste as Energy Source for Internal Combustion Engine SAE Int. J. Engines 13 5 2020 633 648 https://doi.org/10.4271/03-13-05-0040
  6. Nguyen , V. , Zhang , J. et al. Research on the Effect of Crankpin Bearing Speed and Dimension on Improving Engine Power J South Univ 37 2 2021 1 7
  7. Gregory , B. and Katia , L. Analysis of the Dynamics of a Slider-Crank Mechanism with Hydrodynamic Lubrication in the Connecting Rod-Slider Joint Clearance Mech Mach Theory 46 2011 1434 1452
  8. Lia , Y. , Chen , G. , Sun , D. et al. Dynamic Analysis and Optimization Design of a Planar Slider-Crank Mechanism with Flexible Components and Two Clearance Joints Mech Mach Theory 99 2016 37 57
  9. Nguyen , V. , Wu , Z. et al. Optimization of Crankpin Bearing Lubrication under Dynamic Loading Considering Effect of Micro Asperity Contact Ind Lub Tribol 72 2020 1173 1179
  10. Wang , X. , Zhang , J. , and Dong , H. Analysis of Bearing Lubrication under Dynamic Loading Considering Micropolar and Cavitating Effects Tribol Int 44 2011 1071 1075
  11. Wu , Z. , Nguyen , V. , Le , V. et al. Design and Optimization of Textures on the Surface of Crankpin Bearing to Improve Lubrication Efficiency and Friction Power Loss of Engine P I Mech Eng J-J Eng 235 6 2020 1139 1149
  12. Wang , X. , Zhang , J. , and Dong , H. Analysis of Bearing Lubrication under Dynamic Loading Considering Micropolar and Cavitating Effects Tribol Int 44 2011 1071 1075
  13. Kovalchenko , A. , Ajayi , O. , Erdemir , A. et al. The Effect of Laser Surface Texturing on Transitions in Lubrication Regimes during Unidirectional Sliding Contact Tribol Int 38 2005 219 225
  14. Zhang , J. , Yang , D. , Rosenkranz , A. et al. Laser Surface Texturing of Stainless Steel-Effect of Pulse Duration on Texture’s Morphology and Frictional Response Adv Eng Mater 21 2018 1801016
  15. Zhang , J. , Zhang , J. , Rosenkranz , A. et al. Surface Textures Fabricated by Laser Surface Texturing and Diamond Cutting-Influence of Texture Depth on Friction and Wear Adv Eng Mater 20 4 2018 1700995
  16. Rosenkranz , A. , Costa , H. , Profito , F. et al. Influence of Surface Texturing on Hydrodynamic Friction in Plane Converging Bearings—An Experimental and Numerical Approach Tribol Int 134 2019 190 204
  17. Wang , P. , Nguyen , V. , Wu , X. et al. Research on Different Structures of Dimpled Textures on Improving the LE-FPL of Engine Ind Lub Tribol 73 4 2021 545 553
  18. Zhang , H. , Hua , M. et al. Optimization of Texture Shape Based on Genetic Algorithm under Unidirectional Sliding Tribol Int 115 2017 222 232
  19. Jiao , R. , Nguyen , V. et al. Optimal Design of Micro-Dimples on Crankpin Bearing Surface for Ameliorating Engine’s Lubrication and Friction Ind Lub Tribol 73 2020 52 59
  20. Etsion , I. Modeling of Surface Texturing in Hydrodynamic Lubrication Friction 1 2013 195 209
  21. Gropper , D. , Wang , L. , and Harvey , J. Hydrodynamic Lubrication of Textured Surfaces: A Review of Modeling Techniques and Key Findings Tribol Int 194 2016 509 529
  22. Zhang , H. and Hua , M. A Mixed Lubrication Model for Studying Tribological Behaviors of Surface Texturing Tribol Int 93 2016 583 592
  23. Grützmacher , P. , Profito , P. , and Rosenkranz , A. Multi-Scale Surface Texturing in Tribology-Current Knowledge and Future Perspectives Lubricants 7 2019 95
  24. Hua , W. , Nguyen , V. , and Le , V. Analysis of Dimensions of Surface Textures on Lubrication and Friction of an Engine SAE Int. J Engines 15 1 2021 1 10
  25. Zhang , H. , Hua , M. , Dong , G. et al. Boundary Slip Surface Design for High Speed Water Lubricated Tribol Int 79 2014 32 14
  26. Nguyen , V. , Zhang , J. et al. Influence of the Micro Asperity Contact and Radial Clearance of Crankpin Bearings on the Engine’s Tribological Properties J South Univ 37 3 2021 1 7
  27. Nguyen , V. , Wu , Z. , and Jiao , R. Effect of Shape/size and Distribution of Microgeometries of Textures on Tribo-Performance of Crankpin Bearing P I Mech Eng J-J Eng 236 2021 1 11 https://doi.org/10.1177/13506501211010552
  28. Zhao , B. , Zhang , Z. , Fang , C. , Dai , X. et al. Modeling and Analysis of Planar Multibody System with Mixed Lubricated Revolute Joint Tribol Int 98 2016 229 241
  29. Patir , N. and Cheng , H. An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication J Lub Tech 100 1978 12 17
  30. Patir , N. and Cheng , H. Application of Average Flow Model to Lubrication between Rough Sliding Surfaces J Tribol 101 1979 220 229
  31. Zhao , B. , Dai , X. , Zhang , Z. et al. A New Numerical Method for Piston Dynamics and Lubrication Analysis Tribol Int 94 2016 395 408
  32. Braun , M. and Hannon , W. Cavitation Formation and Modelling for Fluid Film Bearings: A Review P I Mech Eng J-J Eng 224 2010 839 863

Cited By