Multiple Direct-Injection Pilot Strategy and Associated Thermodynamic Considerations for High Methanol Utilization over a Wide Load Range in a Dual-Fuel High-Speed Marine Four-Stroke Engine*

Features
Authors
Abstract
Content
Methanol is emerging as a promising potential fuel for the commercial marine industry. However, because methanol is challenging to ignite from compression alone, it is not directly suited as a drop-in compression ignition fuel. One of the most straightforward ways to use methanol in the compression ignition engines is to premix the methanol, such as with port fuel injection during the intake stroke, and then to ignite it with a diesel pilot injection. Although this is the most straightforward approach for methanol, high pressure rise rates occur, which historically have limited methanol utilization. The present work explores pathways that could increase methanol utilization in dual-fuel engines by employing injection strategies and engine control parameters. Results from these approaches are shown in this work to increase methanol utilization up to 75%–90% across a wide range of loads, spanning break-even power to full load operation at 1,800 rpm. A thermodynamic evaluation of the pathways used to achieve these results is presented, along with the utility of employing multiple injections of the diesel pilot fuel.
Meta TagsDetails
DOI
https://doi.org/10.4271/03-19-06-0030
Citation
Splitter, D., Jatana, G., Szybist, J., Svensson, K., et al., "Multiple Direct-Injection Pilot Strategy and Associated Thermodynamic Considerations for High Methanol Utilization over a Wide Load Range in a Dual-Fuel High-Speed Marine Four-Stroke Engine*," SAE Int. J. Engines 19(6), 2026, https://doi.org/10.4271/03-19-06-0030.
Additional Details
Publisher
Published
Nov 18
Product Code
03-19-06-0030
Content Type
Journal Article
Language
English