Characterization of Engine Control Authority on HCCI Combustion as the High Load Limit is Approached

Event
SAE 2013 World Congress & Exhibition
Authors Abstract
Content
In this study the authority of the available engine controls are characterized as the high load limit of homogeneous charge compression ignition (HCCI) combustion is approached. A boosted single-cylinder research engine is used and is equipped with direct injection (DI) fueling, a laboratory air handling system, and a hydraulic valve actuation (HVA) valve train to enable negative valve overlap (NVO) breathing. Results presented include engine loads from 350 to 650 kPa IMEPnet and manifold pressure from 98 to 190 kPaa. It is found that in order to increase engine load to 650 kPa IMEPnet, it is necessary to increase manifold pressure and external EGR while reducing the NVO duration. While both are effective at controlling combustion phasing, NVO duration is found to be a "coarse" control while fuel injection timing is a "fine" control. NOx emissions are low throughout the study, with emissions below 0.1 g/kW-h at all boosted HCCI conditions, while good combustion efficiency is maintained (>96.5%). Net indicated thermal efficiency increases with load up to 600 kPa IMEPnet, where a peak efficiency of 41% is achieved. Parametric investigations reveal that increasing exhaust gas recirculation (EGR) at a constant intake manifold pressure (MAP) and increasing MAP at a constant external EGR rate both retard combustion phasing. It is also found that combustion phasing becomes increasingly sensitive to NVO duration as engine load increases. Finally, comparisons are made between commonly used noise metrics. It is found that compared to the AVL combustion noise meter, ringing intensity (RI) significantly underestimates combustion noise under boosted HCCI conditions.
Meta TagsDetails
DOI
https://doi.org/10.4271/2013-01-1665
Pages
16
Citation
Szybist, J., Edwards, K., Foster, M., Confer, K. et al., "Characterization of Engine Control Authority on HCCI Combustion as the High Load Limit is Approached," Engines 6(1):553-568, 2013, https://doi.org/10.4271/2013-01-1665.
Additional Details
Publisher
Published
Apr 8, 2013
Product Code
2013-01-1665
Content Type
Journal Article
Language
English