J826_200803 Devices for Use in Defining and Measuring Vehicle Seating Accommodation



Issuing Committee
The devices of this SAE Standard provide the means by which passenger compartment dimensions can be obtained using a deflected seat rather than a free seat contour as a reference for defining seating space. All definitions and dimensions used in conjunction with this document are described in SAE J1100. These devices are intended only to apply to the driver side or center occupant seating spaces and are not to be construed as instruments which measure or indicate occupant capabilities or comfort. This document covers only one H-point machine installed on a seat during each test. Certified H-point templates and machines can be purchased from:
  1. SAE International
  2. 400 Commonwealth Drive
  3. Warrendale, PA 15096-0001
Specific procedures are included in Appendix A for seat measurements in short- and long-coupled vehicles and in Appendix B for measurement of the driver seat cushion angle. Specifications and a calibration inspection procedure for the H-point machine are given in Appendix C. Additional considerations are necessary when a Head Restraint Measuring Device (HRMD) is mounted to an H-point machine (Appendix D).
This revision incorporates an inspection procedure for checking calibration of the H-point machine (Appendix C). It also adds specifications for the mounting surface of the head restraint measuring device.
Other changes include:
  1. -
    10 year phase-out period for the HPM
  2. -
    Revision of HPM weight specification from 167 to 169.6 lb to reflect current HPM build
  3. -
    New ambient humidity specification
  4. -
    Narrower range of ambient test temperatures
  5. -
    Clarification of muslin cloth specification
  6. -
    Extensive revision of short couple method and addition of long couple method to Appendix A
  7. -
    Terminology consistent with SAE J1100
  8. -
    Editorial clarifications
SAE J4002 (HPM-II) and SAE J826 (HPM) shall co-exist for a transition period of at least 10 years, preferably no longer, from the first publication date of SAE J4002 (August 2005). Following this transition period SAE J826 will be withdrawn. During the transition period, it remains up to the vehicle designers to decide which HPM to use. Regulatory bodies and other parties that need to know shall be informed regarding which HPM was used.
Meta TagsDetails
SAE International Technical Standard, Devices for Use in Defining and Measuring Vehicle Seating Accommodation, SAE Standard J826_200803, Revised March 2008, Issued November 1962, https://doi.org/10.4271/J826_200803.
Additional Details
Mar 27, 2008
Product Code
Content Type
Technical Standard