J1979-3_202212: E/E Diagnostic Test Modes: Zero Emission Vehicle Propulsion Systems on UDS (ZEVonUDS)

Features

Issuing Committee: Vehicle E E System Diagnostic Standards Committee

Scope

Content

SAE J1979-3 describes the communication between the zero emissions propulsion systems and test equipment required by government regulations. Standardization regulations require passenger cars and light-, medium-, and heavy-duty trucks to support a minimum set of diagnostic information to external (off-board) “generic” test equipment.

To achieve this, SAE J1979-3 is based on the Open Systems Interconnection (OSI) Basic Refer to Model in accordance with ISO/IEC 7498-1 and ISO/IEC 10731, which structures communication systems into seven layers. When mapped on this model, the services specified are broken into:

Application (layer 7), specified in:
1. ○
  ISO 14229-1, ISO 14229-3 UDSonCAN, or ISO 14229-5 UDSonIP
2. ○
  SAE J1979-3 ZEVonUDS
Presentation layer (layer 6), specified in:
1. ○
  SAE J1930, SAE J1930DA
2. ○
  SAE J1979DA
3. ○
  SAE J2012, SAE J2012DA
4. ○
  SAE J1939DA, SAE J1939-73
Session layer services (layer 5), specified in:
1. ○
  ISO 14229-2
Transport layer services (layer 4), specified in:
1. ○
  DoCAN: ISO 15765-2 Transport protocol and network layer services
2. ○
  ISO 15765-4 Requirements for emissions related systems
3. ○
  DoIP: ISO 13400-2 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 2: Transport protocol and network layer services
Network layer services (layer 3), specified in:
1. ○
  DoCAN: ISO 15765-2 Transport protocol and network layer services
2. ○
  ISO 15765-4 Requirements for emissions related systems
3. ○
  DoIP: ISO 13400-2 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 2: Transport protocol and network layer services
Data link layer (layer 2), specified in:
1. ○
  DoCAN: ISO 15765-4, ISO 11898-1, -2
2. ○
  DoIP: ISO 13400-3 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3
Physical layer (layer 1), specified in:
1. ○
  DoCAN: ISO 15765-4, ISO 11898-1, -2, in accordance with Table 1
2. ○
  DoIP: ISO 13400-3 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 3: Wired vehicle interface based on IEEE 802.3
3. ○
  ISO 13400-4 Road vehicles - Diagnostic communication over Internet Protocol (DoIP) - Part 4: Ethernet-based high-speed data link connector
4. ○
  SAE J1962 Diagnostic Connector

NOTE: SAE J1979-3 provides a standard to satisfy known country-specific certification regulations. SAE J1979-3 is not considered a final authority for interpretation of the certification regulations, so users of this document should determine the applicability of capabilities defined in this document for their specific OBD regulatory requirements

Rationale

Content

Due to regulatory adoption of OBDonUDS, SAE J1979 now becomes a multiple part document series:

1
SAE J1979, which defines diagnostic test modes for OBDonEDS used for emissions OBD.
2
SAE J1979-2, which defines the diagnostic services for OBDonUDS used for emissions OBD.
3
SAE J1979-3 (ZEVonUDS), which defines the diagnostic services for electric, fuel cell, and other zero emissions propulsion systems.

Market regulations specify which data links are allowed for sale in a given market.

Meta Tags

Topics: Low emission vehicles (LEV) and zero emission vehicles (ZEV)
On-board diagnostics (OBD)
Electronic brake controls
Greenhouse gas emissions
Electronic control units
Electrical systems
Engine control systems
Identification numbers
Energy storage systems
Diagnostics

Details

DOI: https://doi.org/10.4271/J1979-3_202212

Pages: 52

Citation: SAE International Technical Standard, E/E Diagnostic Test Modes: Zero Emission Vehicle Propulsion Systems on UDS (ZEVonUDS), SAE Standard J1979-3_202212, Issued December 2022, https://doi.org/10.4271/J1979-3_202212.

Additional Details