J1926/2_201609 Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends

Revised

09/09/2016

Features
Issuing Committee
Scope
Content
This part of SAE J1926 specifies dimensions, performance requirements, and test procedures for adjustable and nonadjustable heavy-duty (S series) stud ends with ASME B1.1 threads for use in fluid power and general applications and the O-rings used with them that are currently not listed in SAE J515.
Stud ends in accordance with this part of SAE J1926 may be used at working pressures up to 63 MPa for nonadjustable stud ends and up to 41.3 MPa for adjustable stud ends. The permissible working pressure depends upon materials, design, working conditions, application, etc.
For threaded ports and stud ends specified in new designs for hydraulic fluid power applications, only ISO 6149 shall be used. Threaded ports and stud ends in accordance with ISO 1179, ISO 9974, and ISO 11926 shall not be used for new design in hydraulic fluid power applications.
Conformance to the dimensional information does not guarantee rated performance. Each manufacturer shall perform testing according to the specification contained in this document to ensure that components made to this document comply with the performance rating.
Appendices A and B of this document are informative.
Rationale
Content
This document was revised in order to move the optional inch hex sizes and dimensions to Appendix B.
In an effort to standardize within a global market and ensuring that companies can remain competitive in an international market, it is the intent to convert to metric hex sizes which will:
  1. lead to one global system
  2. guide users to preferred system
  3. reduce complexity
  4. eliminate duplications
The optional inch hexes now contain the note “NOT TO BE USED FOR NEW DESIGN” in accordance with the Metric Hex Resolution approved during the March 2008 FCCTC meeting.
Meta TagsDetails
DOI
https://doi.org/10.4271/J1926/2_201609
Pages
15
Citation
SAE International Technical Standard, Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends, SAE Standard J1926/2_201609, Revised September 2016, Issued August 1988, https://doi.org/10.4271/J1926/2_201609.
Additional Details
Publisher
Published
Sep 9, 2016
Product Code
J1926/2_201609
Content Type
Technical Standard
Status
Revised
Language
English