ARP674C: Groove Design, Metal O-Ring Gasket

Features

Issuing Committee: E-25 General Standards for Aerospace and Propulsion Systems

Scope

Content

Groove designs presented herein are applicable for use with the following "MS" metal O-ring gaskets conforming to the applicable "AS" standard drawings listed in 1(a) or 1(b), or to dimensionally equivalent gaskets of other materials:

a
AMS 5570 or AMS 5576 Plain
1. 1
  AS9141 - 0.035 tube × 0.006 wall
2. 2
  AS9142 - 0.062 tube × 0.006 wall
3. 3
  AS9202 - 0.062 tube × 0.010 wall
4. 4
  AS9203 - 0.094 tube × 0.006 wall
5. 5
  AS9204 - 0.094 tube × 0.010 wall
6. 6
  AS9205 - 0.125 tube × 0.010 wall
b
AMS 5570 or AMS 5576 Silver Plated
1. 1
  AS9371 - 0.035 tube × 0.006 wall
2. 2
  AS9372 - 0.062 tube × 0.006 wall
3. 3
  AS9373 - 0.062 tube × 0.010 wall
4. 4
  AS9374 - 0.094 tube × 0.006 wall
5. 5
  AS9375 - 0.094 tube × 0.010 wall
6. 6
  AS9376 - 0.125 tube × 0.010 wall

NOTE: The term "AS gasket" as used in this document refers to the 'MS' part numbers defined on the applicable 'AS' standards listed in 1(a) or 1(b).

Meta Tags

Topics: Nickel alloys
Tensile strength
Seals and gaskets
Identification numbers
Heat resistant materials
Pressure

Details

DOI: https://doi.org/10.4271/ARP674C

Pages: 11

Citation: SAE International Recommended Practice, Groove Design, Metal O-Ring Gasket, SAE Standard ARP674C, Reaffirmed October 2012, Revised July 2001, Issued April 1964, https://doi.org/10.4271/ARP674C.

Additional Details