Search
Advanced Search
of the following are true

Results

Items (207,296)
This document provides background information, rationale, and data (both physical testing and computer simulations) used in defining the component test methods and similarity criteria described in SAE Aerospace Recommended Practice (ARP) 6330. ARP6330 defines multiple test methods used to assess the effect of seat back mounted IFE monitor changes on blunt trauma to the head and post-impact sharp edge generation. The data generated is based on seat and IFE components installed on type A-T (transport airplane) certified aircraft. While not within the scope of ARP6330, generated test data for the possible future development of surrogate target evaluation methods is also included
Aircraft Seat Committee
This SAE Aerospace Recommended Practice (ARP) provides recommendations for: The audit process in general A list of specific areas of attention to be audited Maintaining the test facility in such a manner that it meets audit requirements
EG-1E Gas Turbine Test Facilities and Equipment
This specification establishes process controls for the repeatable production of aerospace parts by Laser Powder Bed Fusion (L-PBF). It is intended to be used for aerospace parts manufactured using Additive Manufacturing (AM) metal alloys, but usage is not limited to such applications
AMS AM Additive Manufacturing Metals
This SAE Aerospace Information Report (AIR) focuses on opportunities, challenges, and requirements in use of blockchain for Unmanned Aircraft Systems (UAS) operating at and below 400 feet above ground level (AGL) for commercial use. UAS stakeholders like original equipment manufacturers (OEMs), suppliers, operators, owners, regulators, and maintenance repair and overhaul (MRO) providers face many challenges in certification, airspace management, operations, supply chain, and maintenance. Blockchain—defined as a distributed ledger technology that includes enterprise blockchain—can help address some of these challenges. Blockchain technology is evolving and also poses certain concerns in adoption. This AIR provides information on the current UAS challenges and how these challenges can be addressed by deploying blockchain technology along with identified areas of concern when using this technology. The scope of this AIR includes elicitation of key requirements for blockchain in UAS across
G-31 Digital Transactions for Aerospace
This SAE Standard was developed to provide a method for indicating the direction of engine rotation and numbering of engine cylinders. The document is intended for use in designing new engines to eliminate the differences which presently exist in industry
Engine Power Test Code Committee
This specification covers a rust removing compound in the form of a solid, generally powdered, to be dissolved in water, and heated
AMS J Aircraft Maintenance Chemicals and Materials Committee
This specification covers a potassium-acetate base deicing/anti-icing fluid in the form of a concentrated liquid
G-12RDP Runway Deicing Product Committee
This SAE Recommended Practice establishes methods to determine grade parking performance with respect to: a Ability of the parking brake system to lock the braked wheels. b The trailer holding or sliding on the grade, fully loaded, or unloaded. c Applied manual effort. d Unburnished or burnished brake lining friction conditions. e Down and upgrade directions
Truck and Bus Brake Systems Committee
This brief User Guide recaps the content of the AS6518B UCS Architectural Model. The purpose of the UCS Architecture Model is to provide the authoritative source for other models and products within the UCS Architecture as shown in the AS6512B UCS Architecture: Architecture Description
AS-4UCS Unmanned Systems Control Segment Architecture
This SAE Standard establishes practices to: a Manage risk and ensure security of a cyber-physical system (CPS) throughout its life cycle by utilizing systems engineering principles; b Assess the impact of cyber-physical systems security (CPSS) objectives and requirements; c Assess the security risks to CPS technical effectiveness and functions, and address weaknesses and vulnerabilities; d Address various domains of consideration (see 3.1) that take into account operating conditions of the system, command and control, configuration management (refer to SAE EIA649), etc., that could negatively impact CPSS or CPS-designed purpose; e Perform design validation and verification to assess security and risk of the CPS
G-32 Cyber Physical Systems Security Committee
This specification covers established manufacturing tolerances applicable to aluminum alloy standard structural shapes ordered to inch/pound dimensions. Standard structural shapes are shapes in certain standard alloys, tempers, sizes, and sections such as angles, channels, Tees, Zees, I-Beams, and H-Beams commonly used for structural purposes. These tolerances apply to all conditions, unless otherwise noted. The term "excl" applies only to the higher figure of the specified range
AMS D Nonferrous Alloys Committee
This specification covers two types of fire extinguishing foam concentrate in the form of a liquid
AMS J Aircraft Maintenance Chemicals and Materials Committee
This specification covers a compound based on orthodichlorobenzene in the form of a liquid
AMS J Aircraft Maintenance Chemicals and Materials Committee
This specification covers a corrosion and heat resistant steel in the form of welded tubing
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers an aluminum-base alloy in the form of hand forgings and forging stock
AMS D Nonferrous Alloys Committee
This specification covers vacuum-arc-cast molybdenum in the form of wrought round bars
AMS G Titanium and Refractory Metals Committee
This specification has been declared "SUPERSEDED" by the Aerospace Materials Division, SAE, as of October, 1991
AMS B Finishes Processes and Fluids Committee
This standard specifies the communications hardware and software requirements for fueling hydrogen surface vehicles (HSV), such as fuel cell vehicles, but may also be used where appropriate with heavy-duty vehicles (e.g., buses) and industrial trucks (e.g., forklifts) with compressed hydrogen storage. It contains a description of the communications hardware and communications protocol that may be used to refuel the HSV. The intent of this standard is to enable harmonized development and implementation of the hydrogen fueling interfaces. This standard is intended to be used in conjunction with the hydrogen fueling protocols in SAE J2601 and nozzles and receptacles conforming with SAE J2600
Fuel Cell Standards Committee
This document is intended to supplement the SAE J1939 documents by offering the SAE J1939 information in a form that can be sorted and search for easier use
Truck Bus Control and Communications Network Committee
This document provides general and specific design guidance for the development of software data loading equipment for all types of aircraft. The primary purpose of data load is to upload loadable software parts to airborne computers. A secondary function of data load is downloading data from airborne computers. Software data load functionality generally falls into the following categories: Portable Data Loader (PDL) for loading equipment on the ground or carried onto aircraft to perform onboard loading. Airborne Data Loader (ADL) for installation on aircraft to perform onboard loading. Data Load Function (DLF) is software that performs the data loading. This document defines data loaders designed to load avionics equipment over a high-speed interface using an Ethernet network protocol. This document defines media interfaces and protocol requirements specific to all data load functions, whether portable or airborne. This document also describes the desired capabilities of data loading
Airlines Electronic Engineering CommitteeAvionics Maintenance CommitteeFlight Simulator Engineering and Maintenance Committee
This specification covers tungsten in the form of forgings produced from billets processed by isostatically cold pressing, utilizing hydrogen reduced tungsten powder, and high-temperature sintering
AMS G Titanium and Refractory Metals Committee
This document has been prepared and issued to provide information and guidance on the application of AQAP 2110 when the Supplier adheres to the provisions of 9100. This document is published as AQAP 2009 Annex F and 9137. It was jointly developed by NATO and industry representatives for use by NATO and industry to facilitate the use and understanding of the relationship between the AQAP 2110 and 9100
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
This SAE Recommended Practice establishes a method of evaluating the structural integrity of the parking brake system of all new trucks, buses, and combination vehicles designed for roadway use in the following classifications: TRACTOR, TRAILER, TRUCK, AND BUS: over 4500 kg (10 000 lb) GVWR
Truck and Bus Foundation Brake Committee
This SAE Standard establishes minimum requirements for lighting and marking earthmoving work machinery as defined in SAE J1116. It may be used as guidance for other types of machinery. Earthmoving work machines are normally operated off-highway. Therefore, this SAE document is not intended to be used as a basis for regulations by those having authority over on-highway motor vehicles
OPTC3, Lighting and Sound Committee
This specification covers tungsten carbide-cobalt in the form of powder
AMS B Finishes Processes and Fluids Committee
To provide specifications for lighting and marking of industrial wheeled equipment whenever such equipment is operated or traveling on a highway
OPTC3, Lighting and Sound Committee
The CDIF Family of Standards is primarily designed to be used as a description of a mechanism for transferring information between CASE tools. It facilitates a successful transfer when the authors of the importing and exporting tools have nothing in common except an agreement to conform to CDIF. The language that is defined for the Transfer Format also has applicability as a general language for Import/Export from repositories. The CDIF Integrated Meta-model defined for CASE also has applicability as the basis of standard definitions for use in repositories. The standards which form the complete family of CDIF Standards are documented in EIA/IS-106 CDIF - CASE Data Interchange Format - Overview. These standards cover the overall framework, the transfer format and the CDIF Integrated Meta-model. The diagram in Figure 1 depicts the various standards that comprise the CDIF Family of Standards. The shaded box depicts this Standard and its position in the CDIF Family of Standards. This
Systems Management Council
The purpose of this SAE Aerospace Information Report (AIR) is to provide guidance for aircraft engine and propeller systems (hereafter referred to as propulsion systems) certification for cybersecurity. Compliance for cybersecurity requires that the engine control, propeller control, monitoring system, and all auxiliary equipment systems and networks associated with the propulsion system (such as nacelle systems, overspeed governors, and thrust reversers) be protected from intentional unauthorized electronic interactions (IUEI) that may result in an adverse effect on the safety of the propulsion system or the airplane. This involves identification of security risks, their mitigation, verification of protections, and their maintenance in service. This document is intended to serve as suitable guidance for propulsion system manufacturers and applicants for propulsion system type certification. It is also intended to provide guidance for subsequent propulsion system integration into
E-36 Electronic Engine Controls Committee
This specification covers two types of semi-processed silicon steel in the form of sheet and strip supplied in coils or cut lengths
AMS E Carbon and Low Alloy Steels Committee
This Aerospace Standard (AS) defines the test requirements for determining that bus monitors meet the requirements of MIL-STD-1553B, Digital Time Division Command/Response Multiplex Data Bus
AS-1A Avionic Networks Committee
Traditional methods of photometry rely on the use of a goniometer to rotate the test item around two axes at right angles. This method is satisfactory for most situations but has certain disadvantages: a Point-by-point measurements with a goniometer may be slow. With more advanced requirements, particularly for headlamps, where the entire beam pattern is of concern, isocandela measurements are becoming increasingly needed. Such testing can be very time consuming. b For production quality assurance, the speed of a goniometer may not allow testing to keep pace with the production line if a large quantity of lamps must be sampled. c High Intensity Discharge (HID) lamps are becoming commonly used. Such lamps are orientation sensitive, changing in both lumen output and intensity distribution when tilted. This can introduce significant inaccuracies in test results when testing is performed using a goniometer. There is a need for alternative test techniques which can achieve very high speed
Test Methods and Equipment Stds Committee
The scope of this SAE Recommended Practice includes practical applications, theory, process management, audit and control recommendations, limitations, additional considerations, and process documentation
EG-1A Balancing Committee
This specification covers a urea compound in the form of a solid
G-12 Aircraft Ground Deicing Steering Group
This specification covers thoria-dispersion-strengthened nickel in the form of sheet and strip
AMS F Corrosion and Heat Resistant Alloys Committee
This specification and its supplementary detail specifications cover carbon fibers in the form of tape and sheet impregnated with heat-activated, formable, thermoplastic polysulfone resin
AMS P17 Polymer Matrix Composites Committee
This specification covers three types of fully-processed silicon steel in the form of sheet and strip supplied in coils or cut lengths
AMS E Carbon and Low Alloy Steels Committee
Items per page:
1 – 50 of 207296