Search
Advanced Search
of the following are true
(
)

Results

Items (215,928)
Missile Hydraulic Pumps and Their Power SourcesAIR560D (Current)
This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.
A-6C4 Power Sources Committee
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .1900-32 UNJF-3AAS3303B (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .2500-28 UNJF-3AAS3307B (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
STUD - STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS S66286), .3125-18 UNJC X .3125-24 UNJFAS3321F (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, TEE HEAD – CHAMFERED, PD SHANK NICKEL ALLOY (UNS N07001),165 KSI MIN UTS .3750-24 UNJF-3AAS3235D (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
FITTING ASSEMBLY, RING LOCKED, ADAPTER, FLARELESS TO PORT, EXTRA FINE THREADS, 5080 PSIAS5550D (Current)3/27/2026
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Safety and Cybersecurity Recommendations for the Use of the Rust Language in Critical SystemsJA1020_202603 (Current)3/26/2026
This document provides guidance to using Rust in critical and safety-related software. The document summarizes how the usage of Rust supports in arguing safety according to ISO 26262 or RTCA DO-178C combined with RTCA DO-332. Cybersecurity best practices are referenced as these requirements largely overlap with those implemented for safety. As the Rust language is still evolving, this document targets the 2021 and 2024 editions of the language. Older or newer editions might require additional or changed rules and guidelines. Generally, the newest available edition of the language should be selected as newer editions remove ambiguities and outdated parts from the language.
Functional Safety Committee
Truck and Bus Aerodynamic Device and Concept TerminologyJ2971_202603 (Current)3/26/2026
This SAE J2971 Recommended Practice describes a standard naming convention of aerodynamic devices and technologies used to control aerodynamic forces on trucks and buses weighing more than 10000 pounds (including trailers).
Truck and Bus Aerodynamics and Fuel Economy Committee
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-I-36 - 150 (302)AMS3906/5C (Current)10/13/2016
This specification covers one type of epoxy-resin-impregnated, non-woven, glass fiber in the form of tape for hand or machine layup and of flat sheet.
AMS P17 Polymer Matrix Composites Committee
Aluminum Sheet, Laminated Edge BondedAMS4012G (Current)7/28/2014
This specification covers an aluminum or aluminum alloy in the form of sheet, laminated and edge bonded.
AMS D Nonferrous Alloys Committee
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-I-36 - 95 (203)AMS3906/6C (Current)10/13/2016
This specification covers one type of epoxy-resin-impregnated, non-woven, glass fiber in the form of tape for hand or machine layup and of flat sheet.
AMS P17 Polymer Matrix Composites Committee
Test Slabs, Fluoroelastomer (FKM), 70–80 Hardness, for Improved Gas Turbine Engine Oil CompatibilityAMS3217/8A (Current)10/18/2017
This specification covers a fluorocarbon (FKM) rubber stock in the form of molded test slabs.
AMS CE Elastomers Committee
Steel, Bars 0.90 - 1.03CAMS5132M (Current)1/28/2022
This specification covers a high-carbon steel in the form of bars.
AMS E Carbon and Low Alloy Steels Committee
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-III-36 - 120 (248)AMS3906/2C (Current)10/12/2016
This specification covers one type of epoxy-resin-impregnated, non-woven, glass fiber in the form of tape for hand or machine layup and of flat sheet.
AMS P17 Polymer Matrix Composites Committee
Silicone Rubber Sponge Closed Cell, Medium, Extreme Low TemperatureAMS3193F (Current)6/14/2019
This specification covers a silicone rubber sponge in the form of sheet, strip, extrusions, and molded shapes.
AMS CE Elastomers Committee
Plating, Brush, SilverAMS2451/13A (Current)5/24/2022
This specification covers the engineering requirements and process for brush plating of silver by electrodeposition. It shall be used, in conjunction with AMS2451, for silver deposits.
AMS B Finishes Processes and Fluids Committee
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-I-36 - 120 (248)AMS3906/1C (Current)10/12/2016
This specification covers one type of epoxy-resin-impregnated, non-woven, glass fiber in the form of tape for hand or machine layup and of flat sheet.
AMS P17 Polymer Matrix Composites Committee
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For Hand and Machine Layup GL-III-33 - 95 (203)AMS3906/7C (Current)10/13/2016
This specification covers one type of epoxy-resin-impregnated, non-woven, glass fiber in the form of tape for hand or machine layup and of flat sheet.
AMS P17 Polymer Matrix Composites Committee
Cloth, Upholstery, Flame Resistant Novoloid/Aramid, Waffle Type WeaveAMS3856/1B (Current)6/24/2016
This specification covers one weight and one weave of novoloid/aramid cloth.
AMS P Polymeric Materials Committee
Tape, Adhesive, Pressure-Sensitive Thermal Radiation Resistant, Aluminum Foil/Glass ClothAMS3779/1B (Current)7/12/2016
This specification covers thermal radiation resistant material in the form of tape with pressure-sensitive adhesive.
AMS P Polymeric Materials Committee
Cobalt Alloy, High Temperature Brazing Filler Metal 50Co - 8.0Si - 19Cr - 17Ni - 4.0W - 0.80B 2050 to 2100 °F (1121 to 1149 °C) Solidus-Liquidus RangeAMS4783H (Current)7/7/2021
This specification covers a cobalt alloy in the form of wire, rod, strip, foil, and powder and a viscous mixture (paste) of the powder in a suitable binder.
AMS F Corrosion and Heat Resistant Alloys Committee
Identification Bars, Wire, Mechanical Tubing, and Extrusions, Carbon and Alloy Steels and Corrosion and Heat-Resistant Steels and AlloysAMS2806D (Current)12/20/2018
This specification covers procedures for identifying bars, wire, mechanical tubing, and extrusions of carbon and alloy steels and corrosion and heat-resistant steels and alloys.
AMS B Finishes Processes and Fluids Committee
Thread, Para-Aramid Intermediate Modulus 500 yards per pound (1008 m/kg), 225 pounds force (1001 N) Breaking StrengthAMS3787/8C (Current)6/30/2016
This specification covers one weight and strength of para-aramid thread.
AMS P Polymeric Materials Committee
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.30 ounce per linear yard (12 g/linear m)AMS3782/2B (Current)9/10/2013
This specification covers one weight and type of para-aramid webbing.
AMS P Polymeric Materials Committee
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.50 ounce per linear yard (20 g/linear m)AMS3782/4B (Current)9/11/2013
This specification covers one weight and type of para-aramid webbing.
AMS P Polymeric Materials Committee
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus 0.25 ounce per linear yard (9.6 g/linear m)AMS3782/1B (Current)9/10/2013
This specification covers one weight and type of para-aramid webbing.
AMS P Polymeric Materials Committee
Aluminum Alloy 5456, Bar, Rod, Shapes, Tube, and Wire, ExtrudedAMSQQA200/7C (Current)12/7/2017
This specification covers the specific requirements for aluminum alloy 5456 bar, rod, shapes, tube, and wire produced by extrusion.
AMS D Nonferrous Alloys Committee
Case Hardening of Titanium and Titanium AlloysAMS2775C (Current)10/22/2015
This specification covers the engineering requirements for producing a carbon-oxygen-nitrogen-bearing case on titanium and titanium alloys by means of a molten salt bath, and the properties of the case.
AMS B Finishes Processes and Fluids Committee
Interleaf Carrier Material, Composite Tape Polyethylene Coated Paper, Unperforated 0.0035 inch (0.089 mm)AMS3898/3B (Current)4/13/2022
This specification covers one type of paper coated on both sides with polyethylene film in the form of rolls of sheeting or reels of unperforated tape of the width specified.
AMS P17 Polymer Matrix Composites Committee
Interleaf Carrier Material, Composite Tape/Broadgoods Kraft, Differentially Coated Paper, Unperforated 0.0050 inch ± 0.0005 (0.127 mm ± 0.013)AMS3898/9A (Current)4/13/2022
This specification covers a kraft paper, coated on both sides and with different release characteristics on each side (i.e., differentially coated), supplied in the form of rolls of sheeting or reels of unperforated tape of the width specified.
AMS P17 Polymer Matrix Composites Committee
Interleaf Carrier Material, Composite Tape Differentially Coated Paper, Unperforated 0.0035 inch (0.081 mm)AMS3898/6A (Current)4/13/2022
This specification covers a paper, coated on both sides and with different release characteristics on each side (i.e., differentially coated), supplied in the form of rolls of sheeting or reels of unperforated tape of the width specified.
AMS P17 Polymer Matrix Composites Committee
Interleaf Carrier Material, Composite Tape Parchment, 0.004 inch (0.10 mm), UnperforatedAMS3898/1B (Current)4/13/2022
This specification covers one type of parchment in the form of rolls of sheeting or reels of unperforated tape of the width specified.
AMS P17 Polymer Matrix Composites Committee
Interleaf Carrier Material, Composite Tape Paper, 0.04 inch (0.10 mm), PerforatedAMS3898/4B (Current)4/13/2022
This specification covers one type of paper in the form of perforated tape of the width specified herein.
AMS P17 Polymer Matrix Composites Committee
Copper-Beryllium Alloy Wire 98Cu - 1.9Be Solution Heat TreatedAMS4725F (Current)1/2/2018
This specification covers one type of copper-beryllium alloy in the form of wire.
AMS D Nonferrous Alloys Committee
Steel, Sheet and Strip 0.08 - 0.13C, Aluminum Killed (SAE 1010) Deep Forming GradeAMS5047G (Current)2/15/2017
This specification covers an aluminum-killed carbon steel in the form of sheet and strip.
AMS E Carbon and Low Alloy Steels Committee
Identification ForgingsAMS2808E (Current)3/28/2017
This specification covers the requirements for identification of forgings, including die forgings, hand forgings, and rolled rings.
AMS B Finishes Processes and Fluids Committee
Microspheres, Carbon HollowAMS3753C (Current)11/18/2016
This specification covers carbon in the form of hollow microspheres.
AMS P Polymeric Materials Committee
Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 120, 80 (180)AMS3903/5B (Current)11/11/2016
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
AMS P17 Polymer Matrix Composites Committee
Roving, Organic Fiber (Para-Aramid) Intermediate Modulus 4500 Denier (5000 Dtex), 0.9% FinishAMS3904/12B (Current)8/1/2016
This specification covers one type of organic (para-aramid) fiber in the form of roving. The product shall be formed as a number of ends, tows, or strands collected into a parallel bundle with little or no twist.
AMS P17 Polymer Matrix Composites Committee
Alcohol, Denatured EthylAMS3002H (Current)3/24/2014
This specification covers a denatured ethyl alcohol in the form of a liquid.
AMS B Finishes Processes and Fluids Committee
Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 5 Pounds/Cubic Foot (80 kg/m3) DensityAMS3568/1B (Current)8/25/2011
This specification covers a chemically or mechanically expanded polyether urethane (EU) elastomeric foam material in the form of ready-to-use sheet.
AMS P Polymeric Materials Committee
Type 1 Virgin Polytetrafluoroethylene (PTFE) Moldings and ExtrusionsAMS3678/1C (Current)2/29/2016
This specification covers an unfilled grade of virgin polytetrafluoroethylene (PTFE) resin in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
AMS P Polymeric Materials Committee
Type 14 40% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or ExtrusionsAMS3678/14A (Current)2/29/2016
This specification covers a polytetrafluoroethylene (PTFE) resin filled with 40% bronze powder in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
AMS P Polymeric Materials Committee
Type 8 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 10% Carbon FiberAMS3678/8B (Current)2/29/2016
This specification covers a polytetrafluoroethylene (PTFE) resin filled with carbon fiber in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
AMS P Polymeric Materials Committee
Test Slabs, Fluorosilicone (FVMQ) 55 - 65AMS3217/5C (Current)7/19/2013
This specification covers a standard fluorosilicone (FVMQ) rubber stock in the form of molded test slabs.
AMS CE Elastomers Committee
Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or ExtrusionsAMS3678/4B (Current)2/29/2016
This specification covers a polytetrafluoroethylene (PTFE) resin filled with 25% glass fiber in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
AMS P Polymeric Materials Committee
Trace Element Control Nickel Alloy, Cobalt Alloy, and Iron Alloy Wrought Products for High-Temperature, High-Stressed ApplicationsAMS2281B (Current)1/17/2013
This specification establishes maximum permissible limits for elements not normally specified but which may occur in trace amounts in wrought nickel, cobalt, and iron alloy products.
AMS F Corrosion and Heat Resistant Alloys Committee
Plating, Brush, Zinc-Nickel Low Hydrogen EmbrittlementAMS2451/9C (Current)5/24/2023
This specification covers the requirements for brush plating of zinc-nickel by electrodeposition.
AMS B Finishes Processes and Fluids Committee
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90000 (621) Tensile, 40000000 (276) Modulus, 80 (176)AMS3894/7C (Current)9/14/2016
This specification covers one type of epoxy-resin-impregnated carbon fibers in the form of tape and sheet.
AMS P17 Polymer Matrix Composites Committee
Test Slabs, Acrylonitrile Butadiene (NBR-L) Low Acrylonitrile, 65 - 75AMS3217/2D (Current)3/4/2020
This specification covers a standard acrylonitrile butadiene (NBR-L) rubber stock with low acrylonitrile content in the form of molded test slabs.
AMS CE Elastomers Committee
Items per page:
1 – 50 of 215928