Search
Advanced Search
of the following are true

Results

Items (207,244)
This specification covers an aluminum alloy in the form of sand castings
AMS D Nonferrous Alloys Committee
This specification covers plain helical lock washers fabricated from heat treated carbon steel
AMS E Carbon and Low Alloy Steels Committee
This specification covers an aluminum alloy in the form of seamless drawn tubing
AMS D Nonferrous Alloys Committee
This specification has been declared "CANCELLED " by the Aerospace Materials Division, SAE, as of December 2008 and has been superseded by AMS3100B. The requirements of the latest issue of AMS3100B shall be fulfilled whenever reference is made to the cancelled AMS3100/3. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications, noting that it has been superseded by AMS3100B
AMS G9 Aerospace Sealing Committee
This specification covers an aluminum alloy in the form of wire
AMS D Nonferrous Alloys Committee
This specification covers one type of low-contrast, fine-grain radiographic film in the form of cut sheets or rolls
AMS K Non Destructive Methods and Processes Committee
This specification covers one type of low-contrast, medium-grain radiographic film in the form of cut sheets or rolls
AMS K Non Destructive Methods and Processes Committee
This specification covers steel bars and reforging stock of aircraft quality
AMS E Carbon and Low Alloy Steels Committee
This specification covers flash welded rings made of ferritic and martensitic corrosion-resistant steels
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes
AMS CE Elastomers Committee
This specification covers one weight of low-modulus aramid tape
AMS P Polymeric Materials Committee
This specification covers a crosslinked polyvinyl chloride plastic in the form of flexible, thin-wall, heat-shrinkable tubing
AE-8D Wire and Cable Committee
The intent of this specification is for the procurement of the material listed on the QPL and, therefore, no qualification or equivalency threshold values are provided. Users that intend to conduct a new material qualification or equivalency program shall refer to the Quality Assurance section of the base specification, AMS3961. All material qualification and equivalency data has been archived and is available for review upon request. Contact the CMH-17 Secretariat (www.cmh17.org) for additional information
AMS P17 Polymer Matrix Composites Committee
This specification covers the requirements for adhesives in film form for bonding metal facings to metal cores and to metal components of sandwich panels which are intended for use in primary and secondary structural airframe parts that may be exposed to temperatures up to 500°F (260°C
AMS P17 Polymer Matrix Composites Committee
This specification provides requirements and procedures for air-pressure leak testing of parts
AMS B Finishes Processes and Fluids Committee
This specification covers a glyceryl-phthalate-base paint vehicle in the form of a liquid
AMS G8 Aerospace Organic Coatings Committee
This specification provides requirements and procedures for air-pressure leak testing of parts
AMS B Finishes Processes and Fluids Committee
This specification covers steel bars and reforging stock of aircraft quality
AMS E Carbon and Low Alloy Steels Committee
This specification provides requirements and procedures for gas-pressure leak testing of parts
AMS B Finishes Processes and Fluids Committee
This specification provides requirements and procedures for air-pressure leak testing of parts
AMS B Finishes Processes and Fluids Committee
This specification covers a premium aircraft-quality maraging steel in the form of sheet, strip, and plate. Primarily for parts such as pressure vessels, and other components requiring through-hardening, without quenching, to a yield strength of 245,000 psi (1690 MPa) or higher
AMS E Carbon and Low Alloy Steels Committee
This specification covers an aluminum alloy in the form of sheet and plate 0.020 to 0.499 inch (0.51 to 12.67 mm) inclusive, in nominal thickness (see 8.4) alclad two sides
AMS D Nonferrous Alloys Committee
This specification covers a corrosion and heat-resistant steel in the form of welding wire
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers a filled, resinous, thermosetting, two-part liquid compound capable of being applied and cured in place between the surfaces of mechanically fastened (joined) structures
AMS P Polymeric Materials Committee
This specification covers one type of fluorescent magnetic particles in the form of a mixed, ready-to-use suspension in an odorless, inspection oil vehicle and packaged in aerosol cans
AMS K Non Destructive Methods and Processes Committee
This specification covers an aluminum alloy in the form of plate 0.250 to 5.500 inch (6.35 to 139.70 mm), inclusive in nominal thickness (see 8.5
AMS D Nonferrous Alloys Committee
This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes
AMS CE Elastomers Committee
This specification covers one weight of low-modulus aramid tape
AMS P Polymeric Materials Committee
This specification covers a nitrile (NBR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes
AMS CE Elastomers Committee
This specification and its supplementary detail specifications cover various types of para-aramid fabric in the form of webbing
AMS P Polymeric Materials Committee
This specification covers a butyl (IIR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes
AMS CE Elastomers Committee
This specification covers one class of para-aramid tape and webbing of a single width and with varying weights
AMS P Polymeric Materials Committee
This specification covers one weight and type of para-aramid webbing
AMS P Polymeric Materials Committee
This specification covers the general requirements for aluminum alloy bar, rod, shapes, structural shapes, tube, and wire extruded. Specific requirements for these products in a particular alloy are covered by the applicable detailed specification (See 6.3
AMS D Nonferrous Alloys Committee
This specification covers a corrosion and heat-resistant alloy in the form of sheet, strip, and plate
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers three classes of para-aramid tape and webbing of a single width and with varying weights
AMS P Polymeric Materials Committee
This standard establishes the physical item marking requirements for identification purposes for copper and copper-base alloy mill products procured and issued for government activities. Shipment and inspection acceptance markings are not within the scope of this standard
AMS D Nonferrous Alloys Committee
This document (Technical Specification) gives information about qualification rules and the relation between the different specification parts involved, such as Technical Specification (TS), Material Specification (MS), and Purchasing Specification (PS). The link to material qualification and qualified products is presented
AMS CACRC Commercial Aircraft Composite Repair Committee
This specification covers a methyl or methyl vinyl silicone rubber material that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, O-ring cord, and molded in place gaskets for aeronautical and aerospace applications without complete consideration of the end use prior to the selection of this material
AMS CE Elastomers Committee
This specification covers a corrosion and heat-resistant cobalt alloy in the form of round wire 0.001 to 0.140 inch (0.025 to 3.56 mm) inclusive in nominal diameter supplied in straight lengths or coils (see 8.5
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers an aluminum alloy in the form of hand forgings 11.000 inches (280 mm) and under in nominal thickness and of forging stock of any size (see 8.6
AMS D Nonferrous Alloys Committee
This specification covers a titanium alloy in the form of sheet and strip up to 0.143 inches (3.63 mm), inclusive, in nominal thickness
AMS G Titanium and Refractory Metals Committee
This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers the requirements for two classes of chemical conversion coatings formed by the reaction of chemical conversion materials and the surfaces of aluminum and aluminum alloys. This specification is intended specifically to provide components of military weapon systems with maximum corrosion resistance. The coating also provides a surface having better paint adhesion than uncoated aluminum. It is not intended as a general purpose coating for commercial and decorative applications, (see 6.1
AMS B Finishes Processes and Fluids Committee
This specification covers a corrosion-resistant steel in the form of investment castings
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers an aluminum alloy in the form of die forgings 4 inches (102 mm) and under in nominal thickness at time of heat treatment, hand forgings up to 6 inches (152 mm) incl, in as forged thickness, rolled rings with wall thickness up to 3.5 inches (89 mm) incl, and stock of any size for forging or rolled rings (see 8.6
AMS D Nonferrous Alloys Committee
This specification covers the requirements for six alloy compositions, four inspection classes, four radiographic quality grades and six classes of mechanical properties of high strength aluminum-alloy castings
AMS D Nonferrous Alloys Committee
This specification covers an aluminum alloy in the form of sand castings
AMS D Nonferrous Alloys Committee
This specification covers a corrosion and heat resistant steel in the form of covered welding electrodes
AMS F Corrosion and Heat Resistant Alloys Committee
Items per page:
1 – 50 of 207244