Results
This specification covers an aluminum alloy in the form of extruded profiles with a maximum cross-sectional area of 25 in2 (160.29 cm2) and nominal thicknesses from 0.250 to 2.500 inch, inclusive (6.3 to 63.50 mm, inclusive) (see 8.7
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, and forging stock
This SAE Standard covers complete general and dimensional specifications for the various types of tube fittings intended for general application in the automotive, appliance, and allied fields. See SAE J1131 for the performance requirements of reusable (push to connect) fittings intended for use in automotive air brake systems. Flare type fittings shall be as specified in Figures 1 to 4 and Tables 3 to 5. NOTE—For sizes 3/16 to 3/8 and 1/2 to 3/4 the flare type fittings depicted in Figures 1A to 3C are identical with the corresponding refrigeration tube fittings specified in SAE J513. Special size combination fittings 3/16 to 3/8 and 1/2 to 3/4 shall be as specified in SAE J513. Inverted flared type fittings shall be as specified in Figures 5 to 11 and Tables 3, 6, 7, 8, and 9. Gages and gaging procedures pertaining to inverted flared tube fittings are given in Appendix A. NOTE—The seat dimensions specified in Table 6 are predicated on practical threading limitations in steel fittings
This SAE Information Report defines the diagnostic communication protocol TP1.6. This document should be used in conjunction with SAE J2534-2 in order to fully implement the communication protocol in an SAE J2534 interface. Some Volkswagen of America and Audi of America vehicles are equipped with ECU(s), in which a TP1.6 proprietary diagnostic communication protocol is implemented. The purpose of this document is to specify the requirements necessary to implement the communication protocol in an SAE J2534 interface. This SAE Information Report describes how a tester can be connected to a vehicle to perform diagnostics using the TP1.6 protocol. Details regarding ECU to ECU communication have been left out
This specification covers an aluminum alloy in the form of drawn, round seamless tubing 0.500 inch (12.70 mm) and over in OD with nominal wall thickness of 0.029 to 0.500 inch (0.74 to 12.70 mm) (see 8.6
This SAE Aerospace Recommended Practice (ARP) applies to blankets used for passenger comfort within transport category aircraft cabins. When the term “blanket” is used in this document it refers to all blankets that are provided by the aircraft operator for passenger warmth
This SAE Standard establishes the procedure for determining the operator duty cycle sound pressure level Lodc to which operators of powered recreational craft up to 24 m in length are exposed during typical operation as determined by marine engine duty cycle studies. This document describes the instrumentation, the required calibration procedures, the test site, the specifications for “standard craft”, the craft operating conditions, microphone positioning, test procedure, engine speeds for each of the Duty Cycle modes and the formula and table for calculating the Duty Cycle operator ear sound pressure level. This document is subject to change to keep pace with technical advances as well as other international standards and practices. Changes in this Revision: The sound pressure level measurements performed while applying this document are based on the Five-Mode Marine Engine Duty Cycle instead of a single engine speed. A calculation is required to obtain the Duty Cycle operator ear
The test procedures outlined in this SAE Standard are applicable to turbocharging systems having either fixed- or variable-geometry
The purpose and scope of this SAE Recommended Practice is to provide a basis for classification of the extent of vehicle deformation caused by vehicle accidents on the highway. It is necessary to classify collision contact deformation (as opposed to induced deformation) so that the accident deformation may be segregated into rather narrow limits. Studies of collision deformation can then be performed on one or many data banks with assurance that the data under study are of essentially the same type.1 The seven-character code is also an expression useful to persons engaged in automobile safety, to describe appropriately a field-damaged vehicle with conciseness in their oral and written communications. Although this classification system was established primarily for use by professional teams investigating accidents in depth, other groups may also find it useful. The classification system consists of seven characters, three numeric, and four alphameric, arranged in a specific order. The
This SAE Standard covers fuel, oil, or emission hose for use in coupled and uncoupled applications, for use with gasoline, oil, diesel fuel, lubrication oil, or the vapors present in either the fuel system or in the crankcase of internal combustion engines in mobile or stationary applications. This standard covers the hose portion only. If assembly/coupling is required, that is to be agreed to between the customer and assembler, along with the specific requirements
This SAE Aerospace Standard (AS) establishes the requirements for self-aligning, self-lubricating plain spherical bearings incorporating polytetrafluoroethylene (PTFE) in a liner between the ball and the outer race for use in a temperature range of -65 to +250 °F (-54 to +121 °C
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, flash welded rings, and stock for forging or flash welded rings
This specification covers a gold-nickel alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, chips, preforms, and a viscous mixture (paste) of the powder in a suitable binder
This specification covers the engineering requirements for applying aluminum oxide to metal parts by detonation deposition and the properties of such coatings
This specification covers an aluminum alloy in the form of seamless drawn round tubing, having a wall thickness of 0.045 to 0.125 inches (1.14 to 3.18 mm) (see 8.6
This SAE Aerospace Information Report (AIR) provides descriptions of trimmable horizontal stabilizer actuators that are installed on a variety of transport and business aircraft systems
This SAE Standard covers reinforced and flexible hoses intended for use in water and ethylene glycol-based engine-coolant system applications
This specification covers a premium aircraft-quality steel in the form of bars, forgings, mechanical tubing, flash welded rings up through 10.000 inches (254.00 mm) inclusive in diameter or least distance between parallel sides, and stock of any size for forging or flash welded rings
This specification covers upholstery fabrics woven from nylon and treated for fire retardation
This specification covers a corrosion-resistant steel product 8 inches (203 mm) and under in nominal diameter, thickness or for hexagons, least distance between parallel sides, and having a maximum cross-sectional area of 64 in2 (413 cm2) in the solution and precipitation heat treated (H1150) condition
The special risks associated with conducting crash tests on E-vehicles can be divided into two main categories: (1) thermal activity inside the battery (resulting from electrical or mechanical abuse) may lead to energetic emission of harmful and/or flammable gases, thermal runaway, and potentially fire; and (2) the risk of electrocution. Procedures to ensure protection from all types of risk must be integrated into the entire crash test process. This SAE Information Report is intended to provide guidance in this endeavor using current best practices at the time of this publication. As both battery technology and battery management system technology are in a phase of expansion, the contents of this report must then be gaged against current technology of the time and updated periodically to retain its applicability and usefulness. The scope of this document is to provide an understanding of the risks and an overview of the techniques established to reduce the likelihood that an event
This specification covers an acrylonitrile-butadiene (NBR) rubber in the form of molded rings, compression seals, molded O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications. For sheet, strip, tubing, extrusions, and molded shapes, refer to the AMS3215 specification, which is intended for that use
This SAE Standard establishes the minimum performance requirements for pelvic restraint systems (seat belts, anchorages, and the fastening elements of seat belts) necessary to restrain an operator or rider within a roll-over protective structure (ROPS) in the event of a machine roll-over, as defined in ISO 3471, ISO 8082-1, ISO 8082-2, ISO 12117-2, and ISO 13459, or tip-over protection structure (TOPS), in the event of a machine tip over as defined in ISO 12117. This standard provides guidance and recommendations for information included in the machine operator manual
This SAE Information Report is provided as an advisory guide. Individual application discretion is recommended. The content has been presented as accurately as possible, but responsibility for its application lies with the user. The document covers a number of the variables in the torque-tension relationship: friction, materials, temperature, humidity, fastener and mating part finishes, surfaces, and the kind of tightening tools or equipment used. Also described in this document is the torque management required to achieve satisfactory fastened joint tightening. This guide is limited in application to clearance fit threads, such as the common 6g/6H class of fit. Other thread types including interference fit, mechanical locking, prevailing torque, or forms other than ISO-metric may apply to some aspects of this standard but are not specifically covered. The procedures described in this document are based on general factors for the determination of the torque-tension relationship for the
This specification covers a premium aircraft-quality, high-strength, low-alloy steel in the form of bars, forgings, mechanical tubing, flash welded rings, and stock for forging or flash welded rings
Items per page:
50
1 – 50 of 212475