This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, with bars and forgings having a maximum cross-sectional area of 32 square inches (204.46 cm2), and stock for forging of any size (see 8.6AMS G Titanium and Refractory Metals Committee
This specification covers an aluminum alloy in the form of sheet 0.020 to 0.128 inch (0.51 to 3.25 mm), inclusive, in nominal thickness (see 8.5AMS D Nonferrous Alloys Committee
This specification covers a silicone (MQ/VMQ) elastomer that can be used to manufacture product in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification should not be used for molded rings, compression seals, molded O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applicationsAMS CE Elastomers Committee
This specification covers an aluminum alloy in the form of plate 1.000 to 6.000 inches (25.40 to 152.40 mm), inclusive, in nominal thickness (see 8.5AMS D Nonferrous Alloys Committee
This specification covers an aluminum alloy in the form of sheet and plate 0.017 to 2.000 inches (0.43 to 50.80 mm), inclusive, in nominal thickness (see 8.6AMS D Nonferrous Alloys Committee
This specification covers an aluminum alloy in the form of extruded rods, bars, and profiles (shapes) 0.040 to 1.500 inches (1.02 to 38.10 mm), inclusive, in thickness, and produced with maximum cross-sectional area of 23.25 square inches (15000 mm2) and a maximum circumscribing circle diameter (circle size) of 15.5 inches (394 mm) (see 2.4.1 and 8.6AMS D Nonferrous Alloys Committee
This specification covers an aluminum alloy in the form of alclad coiled sheet from 0.010 to 0.128 inch (0.25 to 3.25 mm), inclusive, in thickness supplied in the -T4 temper (see 8.5AMS D Nonferrous Alloys Committee
This specification establishes requirements for a tape that is used to perform organic coatings adhesion testingAMS G8 Aerospace Organic Coatings Committee
This specification covers a titanium alloy in the form of bars, forgings, and flash-welded rings up through 12.000 inches (304.80 mm), inclusive, in diameter or least distance between parallel sides, and stock of any size for forging or flash-welded rings. Bars, forgings, and flash-welded rings with a nominal thickness of 3.000 inches (79.20 mm) or greater shall have a maximum cross-sectional area of 113 square inches (729 cm2) (see 8.5AMS G Titanium and Refractory Metals Committee
This specification establishes nondestructive testing methods, sampling frequency, and acceptance criteria for the inspection of metal castingsAMS B Finishes Processes and Fluids Committee
This specification covers an aluminum alloy in the form of alclad sheet over 0.039 to 0.126 inches (0.99 to 3.20 mm), inclusive, in nominal thickness with a fine-grain core of ASTM No. 6 or finer (see 8.5AMS D Nonferrous Alloys Committee
This method outlines a standard procedure for performing conformity tests of bearings utilizing liners of bonded polytetrafluoroethylene (PTFE). The data from these tests shall be used to determine if the product meets the conformity requirements of the applicable specificationACBG Plain Bearing Committee
This procurement specification covers the requirements for metal tube support clamps comprising of two spring clips made of corrosion and heat resistant steel and the associated PTFE single split cushion that supports the tube. See Figure 1G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This SAE Aerospace Standard (AS) defines minimum performance standards (MPS) for fuel flowmeters, fuel flow indicators, and fuel flow transmitters. The fuel flow indicators and transmitters are intended for use in 14 CFR Part 23, 25, 27, and 29 aircraft equipped with reciprocating and turbine engines. Multiple function displays are not within the scope of this SAE Aerospace Standard (refer to AS6296A-4FLW Fuel Flowmeters
This SAE Standard covers complete general and dimensional specifications for flareless type of hydraulic tube fittings. These fittings are intended for general application in hydraulic systems on industrial equipment and commercial products. These fittings are capable of providing leakproof, full flow connections in hydraulic systems operating at working pressures as specified in Table 1. For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and fitting manufacturer to assure that performance levels will be safe and satisfactory. Formerly, SAE J514 was organized as a single document with ten clauses, which included six sections. This revision of SAE J514 has been organized into three sections as follows: Part 1: 37-degree flared fittings Part 2: Flareless (bite type) fittings Part 3: NPTF pipe fittings and pipe unions It is important to note that this and all SAE J-documents are intended for ground vehicle use only and not intendedHydraulic Tube Fittings Committee
This procurement specification covers tubular, blind rivets fabricated from a corrosion resistant nickel-copper alloy of the type identified under the Unified Numbering System as UNS N04405, and of 52 ksi minimum shear strength for self-plugging style rivetsE-25 General Standards for Aerospace and Propulsion Systems
This technical information report (IR) presents a methodology to evaluate battery pack liquid leak tightness attributes to be used in a production line to satisfy the functional requirement for IPX7, water ingress requirement, and no sustainable coolant leakage for coolant circuits. The Equivalent Channel Method is used as a suggested production leak tightness requirement for a given battery pack design that will correlate and assure that the battery pack meets or exceeds its functional requirement. Obtaining the specific geometry of the Equivalent Channel (EC) for a given battery pack is done analytically and empirically in consideration of the product design limitations. This document is a precursor to J3277-1, which will present the practices to qualify that product leak tightness is equal or better than the maximum allowed EC for that product using applicable and commercially available leak test technologies. This document may be applied to EV and HEV battery packs as tested duringBattery Standards Testing Committee
This SAE Aerospace Information Report (AIR) lists military and industry specifications, standards, recommended practices, and information reports applicable to aerospace hydraulic and pneumatic systems and componentsA-6 Aerospace Actuation, Control and Fluid Power Systems
This procurement specification covers solid rivets and hollow end rivets made from a corrosion and heat resistant steel of the type identified under the Unified Numbering System as UNS S66286 and of 80 ksi single shear strength at room temperatureE-25 General Standards for Aerospace and Propulsion Systems
This procurement specification covers aircraft-quality solid rivets made from a corrosion resistant nickel-copper alloy of the type identified under the Unified Numbering System as UNS N04400 and of 46 ksi minimum shear strengthE-25 General Standards for Aerospace and Propulsion Systems
SAE J3078 provides test methods and criteria for the evaluation of the operator enclosure environment in earth-moving machinery as defined in ISO 6165. SAE J3078/1 gives the terms and definitions which are used in other parts of SAE J3078. It is applicable to Off-Road Self-Propelled Work Machines as defined in SAE J1116 and tractors and machinery for agriculture and forestry as defined in ANSI/ASAE S390HFTC6, Operator Accommodation
This Aerospace Recommended Practice (ARP) provides: Recommended methods for cleaning sample bottles, when used, and the solvents to be applied and how these solvents should be prepared. Recommendations for three measuring methods for determining the level of solid particle contamination of hydraulic fluids used in aerospace hydraulics. Recommendations for the selection of the sampling point, sampling method, and the sampling frequencyA-6C1 Fluids and Contamination Control Committee
This SAE Aerospace Information Report (AIR) provides information on aircraft cabin air quality, including: Origins of chemical airborne contaminants during routine operating and failure conditions. Exposure control measures, including design, maintenance, and worker training/education. This AIR does not deal with airflow requirementsAC-9 Aircraft Environmental Systems Committee
SAE J1939-03 provides requirements and guidelines for the implementation of on-board diagnostics (OBD) on heavy-duty vehicles (HDV) using the SAE J1939 family of standards. The guidelines identify where the necessary information to meet OBD regulations may be found among the SAE J1939 document set. Key requirements are identified here to ensure the interoperability of OBD scan tools across individual OBD-compliant vehicles. Market-defined regulations permit the use of SAE J1939 to meet OBD requirements. Implementers are cautioned to obtain and review the specific regulations for the markets where their products are sold. This document is focused on guidelines and requirements to satisfy the State of California Air Resources Board (CARB), the authors of 13 CCR 1971.1, United States Environmental Protection Agency, Euro IV and V requirements from European Commission directives, and UN/ECE WP 29 GRPE WWH OBD Global Technical Regulation (GTRTruck Bus Control and Communications Network Committee
This SAE Recommended Practice provides a set of test methods and practices for the characterization of lithium ion battery cathode active material. It is beyond the scope of this document to establish criteria for the test results, as these are usually established between the vendor and customer. It should be noted that materials properties can vary substantially between classes of materials (e.g., LNO and LFP) and caution should be exercised when attempting to directly compare their chemical and physical properties. While these distinctions are important for the manufacturer, this document focuses on the techniques to measure the materials properties and not their absolute or relative values. Future materials such as solid-state batteries and sulfides are beyond the scope of this document. It is beyond the scope of this document to examine the rheological properties of the cathode material dispersed in a coating slurry since such properties are influenced by the conductive additiveBattery Materials Testing Committee
The scope of SAE J3062 covers hose intended for containing and circulating lubricant, liquid, and gaseous R-134a, R-152a, and/or R-1234yf refrigerant in automotive air-conditioning systems. The hose shall be designed to minimize permeation of the refrigerant, contamination of the system, and to be functional over a temperature range of -30 to 125 °C. Specific construction details are to be agreed upon between the user and supplier. Requirements for the hose used in coupled automotive refrigerant air-conditioning assemblies are included in SAE J2064. SAE J3062 separates requirements for the hose used in these assemblies into its own standard. SAE J2064 also provides the necessary refrigerant permeation values used in SAE J2727. Mobile air-conditioning system refrigerant emissions rates are established in SAE J2727 emission charts and are important. The certified coupling of MAC hose assemblies is required in meeting certain regulatory requirements. Therefore, the scope of SAE J2064 hasInterior Climate Control MAC Supplier Committee
SAE J1979-2 describes the communication between the vehicle's OBD systems and test equipment required by OBD regulations. On-Board Diagnostic (OBD) regulations require passenger cars and light-, medium-, and heavy-duty trucks to support a minimum set of diagnostic information to external (off-board) “generic” test equipment. To achieve this, SAE J1979-2 is based on the Open Systems Interconnection (OSI) Basic Reference Model in accordance with ISO/IEC 7498-1 and ISO/IEC 10731, which structures communication systems into seven layers. When mapped on this model, the services specified are broken into: Diagnostic services (layer 7), specified in: ○ ISO 14229-1 ○ SAE J1979-2 OBDonUDS Presentation layer (layer 6), specified in: ○ SAE J1930, SAE J1930DA ○ SAE J1979DA ○ SAE J2012, SAE J2012DA ○ SAE J1939DA, SAE J1939-73 Session layer services (layer 5), specified in: ○ ISO 14229-2 Transport layer services (layer 4), specified in: ○ DoCAN: ISO 15765-2 Transport protocol and network layernull, null
This SAE Standard defines the general requirements and provides a system for the control of quality for conformal coatings suitable for application to printed circuit assembliesAMS G8 Aerospace Organic Coatings Committee
This SAE Standard is intended to establish uniform performance criteria and methods of testing compression tube fittings with SAE J844 air brake tubing as used in vehicular air brake systems. This document also establishes minimum qualifications for tensile and pressure capabilities, vibration durability under cyclic temperatures, serviceability, and fitting compatibility requirements. The specific tests and performance criteria applicable to the tubing are set forth in SAE J844. NOTE: The test values contained in this performance standard are for test purposes only. For environmental and usage limitations, refer to SAE J844. For fittings, a type of fitting for use with SAE J844 nonmetallic tubing is included in SAE J246; however, it is not intended to restrict or preclude the use of other designs of fittings that comply with this documentAir Brake Tubing and Tube Ftg Committee
The purpose of this SAE Information Report is to provide an overview of special requirements and practices in fuel cell vehicle thermal management. This document is primarily directed to fuel cell applications in motor vehiclesCooling Systems Standards Committee
This report covers engine tests performed in Altitude Test Facilities (ATFs) with the primary purpose of determining steady state thrust at simulated altitude flight conditions as part of the in-flight thrust determination process. As such it is complementary to AIR1703 and AIR5450, published by the SAE E-33 Technical Committee. The gross thrust determined using such tests may be used to generate other thrust-related parameters that are frequently applied in the assessment of propulsion system performance. For example: net thrust, specific thrust, and exhaust nozzle coefficients. The report provides a general description of ATFs including all the major features. These are: Test cell air supply system. This controls the inlet pressure and includes flow straightening, humidity and temperature conditioning. Air inlet duct and slip joint. Note that the report only covers the case where the inlet duct is connected to the engine, not free jet testing. Thrust stand force measurement systemE-33 In Flight Propulsion Measurement Committee
The AS8050 master document contains general information for qualification of aerospace fiber optic, circular, modular, and rectangular connectors as part of a fiber optic interconnect assembly comprising of a connector, fiber optic cable, and fiber optic terminus. The product specifications (slash sheets) contain dimensional, mechanical, and operating performance requirements for aerospace fiber optic, circular, and rectangular connectors. The product specifications (slash sheets) reference associated aerospace fiber optic termini and cables suitable for use with AS8050 connectorsAS-3 Fiber Optics and Applied Photonics Committee
AIR5933 provides an overview of contemporary technologies (i.e., sensors) that measure the proportion of oxygen in a gas. The use of these sensors in the aerospace environment, with its special constraints, is discussed and papers/reports with detailed information are summarized and referenced. The sensors are divided into expendable and non-expendable sensors. Expendable sensors are based on electrochemical properties, whereas non-expendable sensors rely on paramagnetic, photo-acoustic, electromagnetic, and laser spectroscopy propertiesA-10 Aircraft Oxygen Equipment Committee
This specification establishes requirements for an interior decorative clear coating for wear protection of metal substratesAMS G8 Aerospace Organic Coatings Committee
This AIR provides basic background information and guidance for design and development of BMS architectures to be used in RLBs for aerospace applications. This guidance applies to batteries that are considered “installed” equipment and are intended to be part of the original or supplemental type certification or military airframe qualificationAE-7D Aircraft Energy Storage and Charging Committee
This SAE Aerospace Recommended Practice (ARP) provides recommended practices for the cleaning of aircraft oxygen equipment, both metallic and non-metallic articles, such as oxygen lines (tubes, hoses, etc.), components (including regulator and valve parts), cylinders, and ground-based equipment that may be used to support aircraft oxygen systems. This document also specifies work area details, methods for selecting suitable cleaning agents, cleaning methods, and test methods for verifying levels of cleanliness. The cleanliness coding scheme specified in this document provides a method for documenting minimum cleanliness level requirements and for identifying complianceA-10 Aircraft Oxygen Equipment Committee
This Aerospace Information Report (AIR) describes the use of FTIR analyzers for measurements of gaseous emissions from aircraft gas turbine engines and combustion rigs. The use of FTIR analyzers can be demonstrated as a suitable and cost-effective equivalent to NDIR and chemiluminescence analyzers as prescribed in ARP1256 for the measurement of CO, CO2, NO, and NO2, where NOx is closely approximated by the sum of NO and NO2 concentrations. FTIR analyzers may be proven suitable for equivalency of analyzers used in current emission testing. Additionally, FTIR analyzers have potential for equivalent measurements of “total” hydrocarbon (THC) as currently defined in ARP1256E-31G Gaseous Committee
This Aerospace Information Report (AIR) is a historical technical record describing procedures, required continuous sampling conditions, and instrumentation for the measurement of non-volatile particle number and mass concentrations from the exhaust of aircraft gas turbine engines. Procedures are included to calculate sampling loss performance. This AIR is not intended for in-flight testing, nor does it apply to engine operating in the afterburning mode. This Aerospace Information Report is a historical technical record of the initial document detailing the measurement of non-volatile particle emissions at the exit plane of aircraft gas turbine engines. This methodology was adopted by ICAO into Annex 16 Vol II and updated into Aerospace Recommended Practice ARP6320. Future updates of this document may include explanations of the reasoning and assumptions used to develop this measurement methodologyE-31P Particulate Matter Committee
The purpose of ARINC Report 434 is to provide practical recommendations, based on the collective experience of the Synthetic Training Device (STD) community, for improving operational reliability and maintainability throughout the life cycle of a training device. It is hoped that formulating industry guidelines will lead to mutually defined (customer and supplier) goals for STD reliability, maintainability, and overall life-cycle cost managementFlight Simulator Engineering and Maintenance Committee
This document describes the aircraft industry recommendations for a headset with integral boom microphone suitable for pilot use in all types of aircraft using conventional radio installations. This document, ARINC Characteristic 535B, is in addition to and does not supersede the older ARINC Characteristic 535A: Lightweight Headset and Boom Microphone, dated March 3, 1972Airlines Electronic Engineering Committee