Search
Advanced Search
of the following are true

Results

Items (207,327)
This document provides background information, rationale, and data (both physical testing and computer simulations) used in defining the component test methods and similarity criteria described in SAE Aerospace Recommended Practice (ARP) 6330. ARP6330 defines multiple test methods used to assess the effect of seat back mounted IFE monitor changes on blunt trauma to the head and post-impact sharp edge generation. The data generated is based on seat and IFE components installed on type A-T (transport airplane) certified aircraft. While not within the scope of ARP6330, generated test data for the possible future development of surrogate target evaluation methods is also included
Aircraft Seat Committee
This SAE Aerospace Recommended Practice (ARP) provides recommendations for: The audit process in general A list of specific areas of attention to be audited Maintaining the test facility in such a manner that it meets audit requirements
EG-1E Gas Turbine Test Facilities and Equipment
This specification defines basic physical, chemical, and performance limits for 5 cSt grades of gas turbine engine lubricating oils used in aero and aero-derived marine and industrial applications, along with standard test methods and requirements for laboratories performing them. It also defines the quality control requirements to assure batch conformance and materials traceability, and the procedures to manage and communicate changes in oil formulation and brand. This specification invokes the Performance Review Institute (PRI) product qualification process. Requests for submittal information may be made to the PRI at the address in Appendix D Section D.2, referencing this specification. Products qualified to this specification are listed on a Qualified Products List (QPL) managed by the PRI. Additional tests and evaluations may be required by individual equipment builders before an oil is approved for use in their equipment. Approval and/or certification for use of a specific gas
E-34 Propulsion Lubricants Committee
This specification covers vacuum-arc-cast molybdenum in the form of wrought round bars
AMS G Titanium and Refractory Metals Committee
This test method provides procedures for exposing specimens of elastomer material (slab form) representative to those used in gas turbine engines to aviation lubricants under extended duration and engine relevant thermal conditions. For AS5780 requirements the time is at least 1800 hours and temperatures are 100 °C to 160 °C. Positive volume change is an indication of specimen swell and subsequent negative volume change is an indication of specimen deterioration, both properties are important in the evaluation of the compatibility of the lubricant with elastomers used in the construction of the gas turbine
E-34 Propulsion Lubricants Committee
This list of terms, with accompanying photomicrographs where appropriate, is intended as a guide for use in the preparation of material specifications
AMS G Titanium and Refractory Metals Committee
This SAE Aerospace Information Report (AIR) establishes guidance for the specification of formulated lubricant properties which contribute to the lubricating function in bearings, gears, clutches, and seals of aviation propulsion and drive systems
E-34 Propulsion Lubricants Committee
An oil sample is placed into an open top glass vial which is then inserted into a stainless steel pressure vessel. The vessel is then sealed, pressurized, and placed into a heated aluminum block bath for 18 hours. At the end of the 18 hour time period, the vessel is removed from the heat source and allowed to cool to room temperature at which time the contents of the vial are filtered and the total sediment is reported as milligrams of sediment per 20 mL of oil
E-34 Propulsion Lubricants Committee
This specification covers tungsten in the form of forgings produced from billets processed by isostatically cold pressing, utilizing hydrogen reduced tungsten powder, and high-temperature sintering
AMS G Titanium and Refractory Metals Committee
Primarily to provide recommendations concerning minimizing stress-corrosion cracking in wrought titanium alloy products
AMS G Titanium and Refractory Metals Committee
This recommended practice provides a method, test set-up, and test conditions for brake hydraulic component flow rate measurement for high differential pressure (>5 bar) flow conditions. It is intended for hydraulic brake components which affect the brake fluid flow characteristics in a hydraulic brake circuit, that are part of a circuit for which the flow characteristics are important to system operation, and that are exposed to high operating pressure differentials (in the 5 to 100 bar range). Typical applications may include measurement of flow through chassis controls valve bodies, orifices in the brake system such as in flow bolts, junction blocks, and master cylinders, and through brake pipe configurations
Hydraulic Brake Components Standards Committee
This SAE Recommended Practice describes a laboratory test procedure for evaluating the loss of thickness and the amount of structural breakdown of slab polyurethane foam seating materials. A test specimen is measured for thickness under a specified load and subsequently subjected simultaneously to compressive and shear deformation in a controlled atmosphere. This is accomplished by subjecting the foam to a rolling shearing action under a constant load for a specified number of cycles. Specimen thickness under a constant load is obtained after a 1hr recovery period following dynamic fatigue to determine loss in foam thickness
Motor Vehicle Council
This SAE Recommended Practice covers the requirements for all marine inboard engine wiring, wiring assemblies, wiring components, and wiring connectors connected to microprocessors associated with the operation of the propulsion system, operating at 50 V or less. EXCEPTION—Outboard engines and engines in Personal Water Craft (PWC). NOTE: See ABYC E11 for additional requirements related to electrical installations on small craft
Marine Technical Steering Committee
This SAE Recommended Practice describes the vibration durability testing of a single battery (test unit) consisting of either an electric vehicle battery module or an electric vehicle battery pack that is typically greater than 200 kg in mass and structurally integrated as part of the vehicle. For statistical purposes, multiple samples would normally be subjected to such testing. Additionally, some test units may be subjected to life cycle testing (either after or during vibration testing) to determine the effects of vibration on battery life. Such life testing is not described in this procedure; SAE J2288 may be used for this purpose as applicable. Finally, impact testing, such as crash and pothole, are not included in this procedure. SAE 2464 describes abusive/safety shock tests. Preferably, a specific vibration durability profile should be developed based on actual vehicle measurements for the specific electric vehicle application
Battery Standards Testing Committee
These remanufacturing procedures are recommended guidelines for use by remanufacturers of starter drives to promote consistent reliability, durability, and safety of remanufactured starters. Installation of remanufactured or rebuilt products is often an economical way to repair a vehicle even though the products may not be identical to original equipment parts. Before processing any part, a remanufacturer should determine if the original design and present condition of the core is suitable for remanufacturing so as to provide durable operation of the part as well as acceptable performance when installed on the vehicle. The remanufacturer should also consider the safety aspects of the product and any recommendations of the original manufacturers related to remanufacturing or rebuilding their product. While these procedures are meant to be universal in application, various product types have unique features of dimension and design which may require special remanufacturing processes and
Motor Vehicle Council
This SAE practice is intended for the sample preparation of test pieces for automotive wheels and wheel trim. The practice provides a consistent scribing method for use on test panels and or component parts with substrate chemical pretreatment and coating systems. Test specimens can then be subjected to various corrosion tests in order to evaluate performance without significant variations of the degree of exposure of the substrate. The scribing is used to create a break in the coating/finishing as can occur in the field through gravel and other damaging conditions. NOTE— Significant variability is attributed to surface contour, coating hardness/softness, operator reproducibility, and the scribing tool and it’s condition
Wheel Standards Committee
This SAE Standard covers military engine oils suitable for preservation, break-in, and lubrication of reciprocating internal combustion engines of both spark-ignition and compression-ignition types and of power transmission fluid applications in equipment used in combat/tactical service (see 7.1). This document is equivalent to MIL-L-21260 when all requirements are met
Fuels and Lubricants TC 1 Engine Lubrication
This Information Report addresses the design and performance specifications for a generic buck to be used in full-scale vehicle to pedestrian tests conducted to evaluate pedestrian dummy performance. Specifically, the buck is designed to mimic the impact response of the front end of a sedan within the small family car class during a collision with a pedestrian. The goal is to develop a generic buck with simplified geometry and a limited number of components made of clearly defined and readily available engineering materials to facilitate fabrication and reproducibility. To ensure performance of the buck, it is specified that the buck mimics the maximum crush distance, absorbed energy, and maximum force corresponding to a sedan within the small family car class during a pedestrian impact. The design and performance specifications provided in this document focus on: (1) the design specifications describing the materials and geometry of the generic buck and (2) the specific certification
Human Biomechanics and Simulations Standards Committee
This SAE Recommended Practice establishes an inertia dynamometer test procedure, using an exemplar caliper disc brake, to characterize the effectiveness of disc brake friction materials for passenger cars and light-duty trucks, up to and including 2700 kg (5954 lb) GVW. SAE J1652 provides a method of characterizing friction material effectiveness on a full disc brake, using test conditions that approximate those for U.S. mandated new vehicle brake tests
Brake Dynamometer Standards Committee
This SAE Standard provides requirements to support applications for the maneuver sharing and coordinating service (MSCS) beyond broadcast of basic safety messages (BSMs). This is to improve road safety and traffic efficiency by sharing and coordinating vehicle maneuvers via vehicle-to-everything (V2X) communications. This document lays out use case scenarios and defines vehicle-to-vehicle (V2V) application protocols, system requirements and message sets for MSCS. The defined message sets for MSCS will result in identifying new message types, data frames, and data elements for SAE J2735
V2X Vehicular Applications Technical Committee
This SAE Information Report is intended to help promote the proper use of Predictive and Preventive Diagnostic Maintenance in hydraulic systems. This document can be used as a selection guide for the level of diagnostic equipment and methods to specify for a given application. Each application has its own particular requirements
Industrial Fluid Power Components
This document describes System Theoretic Process Analysis (STPA) approaches to evaluate human-machine interaction (HMI) found effective when conducting STPA human factors and/or a system safety evaluation
Functional Safety Committee
This SAE Recommended Practice provides test procedures, requirements, and guidelines for high-mounted stop lamps and high-mounted turn signal lamps intended for use on vehicles 2032 mm or more in overall width. This document applies to trucks, motor coaches, van type trailers, and other vehicles with permanent structure greater than 2800 mm high. This document does not apply to school buses, truck tractors, pole trailers, flat-bed trailers, pick-up truck with dual wheels and trailer converter dollies. The purpose of the high-mounted stop lamp(s) and high-mounted turn signal lamp(s) is to provide a signal over intervening vehicles to the driver of following vehicles
Heavy Duty Lighting Standards Committee
The scope of this document is to describe system design guidelines for the use of haptic interfaces to manage system safety and functional aspects of designs applicable for OEM and aftermarket systems in light vehicles. The intent of these guidelines is to help system designers determine when to use haptic interfaces and how to ensure their effectiveness. These may be stand-alone interfaces or the haptic aspects of multi-modal (audio, video, speech, haptic) interfaces. Excludes haptic systems designed for use by passengers, which may be addressed in a future version
null, null
This SAE Standard provides the specifications and procedures for using the H-point machine (HPM1) to audit vehicle seating positions. The HPM is a physical tool used to establish key reference points and measurements in a vehicle (see Figure 1 and Appendix A). The H-point design tool (HPD) is a simplified CAD2 version of the HPM, which can be used in conjunction with the HPM to take the optional measurements specified in this document, or used independently during product design (see Appendix D). These H-point devices provide a method for reliable layout and measurement of occupant seating compartments and/or seats. This document specifies the procedures for installing the H-point machine (HPM) and using the HPM to audit (verify) key reference points and measurements in a vehicle. The devices are intended for application at designated seating positions. They are not to be construed as tools that measure or indicate occupant capabilities or comfort. They are not intended for use in
Human Accom and Design Devices Stds Comm
There is no standard equivalent to this SAE Standard. However, SAE J2226 is similar to and represents an extension of SAE J1998 (equivalent to ISO Standard 6622/2 TR). This SAE Standard specifies the essential dimensional features of Type B barrel faced steel rectangular piston rings. Only fully faced and inlaid coated rings are included, consistent with current U.S. practice. The requirements of this SAE Standard apply to steel piston rings of reciprocating internal combustion engines, up to and including 200 mm diameter and 4.5 mm width. Tolerances specified in this document represent a six sigma quality level
Piston and Ring Standards Committee
The SAE J526 Standard covers electric-resistance welded single-wall low-carbon steel pressure tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a quality suitable for bending, flaring, beading, forming, and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path that would be caused by the ID weld bead or scarfed region. Assumption of risks when using this material for single flare applications shall be defined by agreement between the producer and tube purchaser. The material produced to this specification is intended to service pressure applications where severe forming and bending is not required. As this material may exhibit mechanical properties that reduce some desired forming characteristics versus SAE J356, the severity of the forming requirements of the finished assembly should be considered when utilizing material produced to this
Metallic Tubing Committee
This SAE Information Report J2931/6 establishes the requirements for physical and data link layer communications between Plug-in Electric Vehicles (PEV) and the Electric Vehicle Supply Equipment (EVSE
Hybrid - EV Committee
This SAE Recommended Practice specifies graphic symbols for operator controls, gauges, tell-tales, indicators, instructions, and warning against risks in small craft and for engines and other equipment intended to be used in small craft
Marine Technical Steering Committee
This standard includes names of major components and parts peculiar to this type machine. The illustrations are descriptive of the principles and are not intended to include all existing commercial machines. Refer to SAE J1057 (July, 1973)?Identification Terminology of Earthmoving Machines for machine type
MTC1, Earthmoving Machinery
This SAE Recommended Practice describes the dynamic and static testing procedures required to evaluate the integrity of the ambulance substructure, to support the safe mounting of an SAE J3027 compliant litter retention device or system, when exposed to a frontal, side or rear impact (i.e., a crash impact). Its purpose is to provide manufacturers, ambulance builders, and end-users with testing procedures and, where appropriate, acceptance criteria that to a great extent ensure the ambulance substructure meets the same performance criteria across the industry. Prospective manufacturers or vendors have the option of performing either dynamic testing or static testing. Descriptions of the test set-up, test instrumentation, photographic/video coverage, test fixture, and performance metrics are included
Truck Crashworthiness Committee
The J2012 Digital Annex of Diagnostic Trouble Code Definitions Spreadsheet provides DTC information in an excel format for use in your organization's work processes. The column headings include the same information as contained in the J2012 standard. Information in the excel spreadsheet will be updated several times annually and the spreadsheet includes a column heading denoting which DTCs have been updated in the current version
Vehicle E E System Diagnostic Standards Committee
This SAE Standard provides test procedures, performance requirements, and guidelines for center high mounted stop lamps (CHMSL) for use on vehicles less than 2032 mm in overall width
Signaling and Marking Devices Stds Comm
This SAE Standard is intended to establish uniform methods for testing certain types of carbon steel and high strength, low alloy steel tubing as listed in 2.1.1. The specified test and performance criteria applicable to each variety of tubing are set forth in the respective SAE J specifications
Metallic Tubing Committee
This top-level document provides a general overview of the SAE J1939 network and describes the subordinate document structure. This document includes definitions of terms and abbreviations which are used among the various SAE J1939 subordinate documents
Truck Bus Control and Communications Network Committee
This SAE Recommended Practice is intended to cover plastic safety glazing for use in motor vehicles and motor vehicle equipment. Nominal specifications for thickness, flatness, curvature, size, and fabrication details are presented principally for the guidance of body engineers and designers. For additional information on plastic safety glazing materials for use in motor vehicles and motor vehicle equipment, please refer to SAE J673
Glazing Materials Standards Committee
This document provides design guidelines, test procedure references, and performance requirements for omnidirectional and selective coverage optical warning devices used on authorized emergency, maintenance, and service vehicles. It is intended to apply to, but is not limited to, surface land vehicles
Emergency Warning Lights and Devices Standards Committee
This SAE Standard is intended for light and heavy-duty on-highway trucks and their trailers; and off- road machinery applications as described in SAE J1116. The terminals described in this document are primarily used to connect batteries, cranking motors, solenoids, magnetic switches, and master disconnect switches and power cable assemblies
CTTC C2, Electrical Components and Systems
This information report gives typical requirements for an anechoic chamber in which the system susceptibility of an operating motor vehicle to electromagnetic fields can be determined in the frequency range of 20 MHz to 18 GHz. Because of the large cone sizes required for 20 MHz cut-off, several anechoic facilities have been designed with lower cut-off frequencies of 200 MHz or greater. Testing below cut-off is then accomplished using customized antennas at reduced accuracy. Users should carefully review their testing requirements before undertaking the construction of a test facility the magnitude of an anechoic chamber. Other test approaches include, but are not limited to, open field testing per SAE J1338 and mode stirred reverberation chambers
Electromagnetic Compatibility (EMC) Standards
Three levels of fan structural analysis are included in this practice: a Initial structural integrity. b In-vehicle testing. c Durability (laboratory) test methods. The initial structural integrity section describes analytical and test methods used to predict potential resonance and, therefore, possible fatigue accumulation. The in-vehicle (or machine) section enumerates the general procedure used to conduct a fan strain gage test. Various considerations that may affect the outcome of strain gage data have been described for the user of this procedure to adapt/discard depending on the particular application. The durability test methods section describes the detailed test procedures for a laboratory environment that may be used depending on type of fan, equipment availability, and end objective. The second and third levels build upon information derived from the previous level. Engineering judgment is required as to the applicability of each level to a different vehicle environment or a
Cooling Systems Standards Committee
This SAE standard is intended to create standard terminology related to light and medium duty trailer applications. This includes such trailer types as utility, boat, camping, travel, and special purpose trailers which are normally towed by conventional passenger cars, light-duty commercial vehicles, light trucks, and multipurpose passenger vehicles
Trailer Committee
Included herein are general, dimensional, and performance specifications for those types, styles, and sizes of steel stamped Push-On Spring Nuts recognized as SAE standard. These nuts are intended for general use where the engagement on the mating metal or plastic studs and in some cases screw or bolt threads is considered adequate for the fastening joint application. It should be noted that Push-On Spring Nuts having other characteristics and configurations are available and manufacturers should be consulted. For the metric equivalent of this document, see SAE J892M
Fasteners Committee
This SAE Recommended Practice establishes a uniform laboratory procedure for evaluating performance and wear of automotive brakes and brake drums by an inertial dynamometer simulation of vehicle test and operating conditions. The code is applicable to hydraulic, air, or electrically actuated brakes. For electric brakes, 'ampere' values are substituted for 'line pressure' where specified in the procedure or on data and curve sheets. The procedure includes the following tests: 1. Torque output and deceleration (various speeds and brake input). 2. Evaluation of lining life (wear tests). 3. Brake characteristics (fade and recovery tests, noise, chatter, grabbiness). 4. Drum evaluation (wear, heat checking, scoring
Brake Dynamometer Standards Committee
This method is designed to evaluate the coking propensity of synthetic ester-based aviation lubricants under single phase flow conditions found in certain parts of gas turbine engines, for instance in bearing feed tubes. This method is applicable to lubricants with a coking propensity, as determined by this method, falling in the range 0.01 to 5.00 mg
E-34 Propulsion Lubricants Committee
This SAE Aerospace Standard (AS) establishes requirements applicable to metal stock that is ordered and produced in accordance with an Aerospace Material Specification (AMS). Topics include producer requirements, distributor requirements, size and grain orientation nomenclature, and purchaser ordering information to distributors. Requirements of this document have been developed to address titanium and titanium alloys, aluminum and aluminum alloys, carbon and alloy steels, and corrosion and heat-resistant alloys
AMS G Titanium and Refractory Metals Committee
The lubricant performance capability for aero propulsion drive systems is derived from the physical properties of the oil and performance attributes associated with the chemical properties of the oil. Physical properties, such as viscosity, pressure-viscosity coefficient and full-film traction coefficient are inherent properties of the lubricating fluid. Chemical attributes are critical for the formation of protective boundary lubricating films on the surfaces to prevent wear and scuffing. These attributes are also associated with surface initiated fatigue (micropitting). To assure performance and to provide required information for engineering design, methodology for at least five oil properties are being studied: (1) pressure-viscosity coefficient, (2) full-film traction coefficient, (3) scuffing resistance, (4) wear resistance, and (5) micropitting propensity. The pressure-viscosity coefficient can be measured either directly by assessing viscosity as a function of pressure using
E-34 Propulsion Lubricants Committee
This Recommended Practice applies to on-road vehicles with a GVWR below 4540 kg equipped with disc brakes
Brake Dynamometer Standards Committee
To present methods which, according to the consensus of the aviation propulsion community represented by SAE Committee E-34, allow the continued assessment of load carrying capacity of current chemistry products during periods of limited or nonavailability of previously used standardized methods
E-34 Propulsion Lubricants Committee
Items per page:
1 – 50 of 207327