Results
This SAE Standard was developed to provide a method for indicating the direction of engine rotation and numbering of engine cylinders. The document is intended for use in designing new engines to eliminate the differences which presently exist in industry
This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of February 1996
This document has been declared "CANCELLED" as of January 2009. By this action, this document will remain listed in the Numerical Section of the Aerosepace Standards Index
This SAE Aerospace Standard (AS) provides design criteria and performance tests for portable, handheld, battery-powered, electronic megaphones used by aircraft crew members to provide information and guidance in the event of an aircraft emergency or other non-routine situation
This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of March 1995. By this action, subject specification number and title will be deleted from the active specification index of Aerospace Material Specifications
This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of February 1996
This specification covers a corrosion and heat-resistant alloy in the form of sheet, strip, and plate
No Scope available
No Scope available
No Scope available
This drawing specifies parts AS55018, AS55019, AS55020, AS55021, AS55022, AS55023, AS55024, AS55025, AS55026, AS55027, AS55028, AS55029, AS55030, AS55031, AS55032, AS55034, AS55036, AS55038, AS55040, AS55042, AS55044, AS55046, AS55048, AS55050, AS55052, AS55054, AS55056, AS55058, AS55060, AS55062, AS55064, AS55066, AS55068, AS55070, AS55072, AS55074, AS55076, AS55078, AS55080, AS55082, AS55084, AS55086, AS55088, AS55090, AS55092, AS55094, and AS55096. To view suppliers qualified to manufacture this part, visit https://ts200.sae-itc.org
No scope available
No Scope available
Enhanced License for Data Dictionary for Quantities Used in Cyber Physical Systems (AS6969B) allowing for greater usage as outlined in the terms of the Enhanced License. Terms can be reviewed prior to purchase once item is added to the cart. Data Dictionary for Quantities Used in Cyber Physical Systems (AS6969B) This data dictionary provides definitions for quantities commonly used in the command and control of cyber physical systems. It defines mathematical and logical terms, quantities, measurement units, reference systems, measurands, and measurements. It also defines common quantity modalities. The dictionary is structured to be convenient to data modelers. It is also extendable so that users can create their own quantity domains
This Aerospace Recommended Practice (ARP) is to establish criteria for design and installation of combination evacuation slide/raft devices for use both as ground and water escape devices in the event of emergency. NOTE: This document is not intended to specify design methods, mechanisms, or equipment to be used in accomplishment of the objectives set forth herein
This Aerospace Recommended Practice (ARP) establishes criteria for design and installation of devices which will ensure rapid and effective occupant evacuation in the event of an emergency. This ARP deals with emergency evacuation devices installed for the purpose of rapidly assisting the occupants to the ground or water from emergency exits and/or wings. NOTE: This document is not intended to specify design methods, mechanisms or equipment to be used in accomplishment of the objectives set forth herein
This drawing specifies parts AS54712, AS54713, AS54714, AS54715, AS54716, AS54717, AS54718, AS54719, AS54720, AS54721, AS54722, AS54723, AS54724, AS54725, AS54726, AS54727, AS54728, AS54729, AS54730, AS54731, AS54732, AS54734, AS54736, AS54738, AS54740, AS54742, AS54744, AS54746, AS54748, AS54750, AS54752, AS54754, AS54756, AS54758, AS54760, AS54762, AS54764, AS54766, AS54768, AS54770, AS54772, AS54774, AS54776, AS54778, AS54780, AS54782, AS54784, AS54786, AS54788, AS54790, AS54792, AS54794, and AS54796. To view suppliers qualified to manufacture this part, visit https://ts200.sae-itc.org
This standard provides the following: a Definition of terms pertaining to marking. b Symbols for marking location. c Requirements and restrictions for permanent markings. d Types of marking methods. e Rules for designating marking methods. f Table listing marking methods
No scope available
No scope available
This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of February 1996
This specification covers a corrosion-resistant steel product in the solution and precipitation heat-treated (H950) condition, 12 inches (305 mm) and under in nominal diameter, thickness, or, for hexagons, least distance between parallel sides
This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of January 1990
This specification covers a corrosion- and heat-resistant nickel alloy in the form of wire up to and including 0.563 inches (14.30 mm) in diameter
This specification covers a magnesium alloy in the form of sand castings
This specification covers metal products fabricated by direct metal deposition
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock
This specification has been declared "NONCURRENT" by the Aerospace Materials Division, SAE, as of September 1996. It is recommended, therefore, that this specification not be specified for new designs. This specification covers a low-alloy steel in the form of sand castings. Primarily for cast parts requiring heat treatment to minimum yield strengths up to 180,000 psi (1240 MPa
This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of June, 1996, and has been supersed by AMS 3731 & /7
This specification has been declared "CANCELLED" by the Aerospace Materials Division, SAE, as of June 1996, and has been superseded by AMS 3731 & /1
This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, forgings, flash-welded rings, and stock for forging, flash-welded rings, or heading
This specification covers closely-wound helical coil, screw thread inserts made from an age hardenable nickel base alloy formed wire of the type identified under the Unified Numbering System as UNS N07750. The inner surface of the insert coil, after assembly into a screw thread tapped hole, provides internal threads of standard 60° Unified Form
This set of Abstract Syntax Notation (ASN.1) modules contains the precise definitions of data structures used in the SAE J3287 standard. Using the ASN.1 specification, a compiler tool can produce libraries that enable software applications to use the data structures and produce corresponding encodings using the Octet Encoding Rules (OER). For further information see the body of SAE J3287. You may also be interested in: V2X Misbehavior Reporting™ the J3287 PDF. V2X Misbehavior Reportingt™ SET File that includes the J3287 ASN File and the J3287 PDF (ZIP format) - download purchase only
This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or subcontractors, of parts made of wrought or additively manufactured nickel or cobalt alloys, of raw materials during fabrication, and of fabricated assemblies in which wrought nickel or cobalt alloys are the primary structural components
This specification covers epoxy-resin-impregnated glass fabric laminates in the form of sheet clad on one or both sides with electrolytically-deposited copper foil
This specification covers an aluminum alloy in the form of sheet
This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of October 1995
This specification covers filled, resinous, thermosetting compounds capable of being applied and cured in place between the surfaces of mechanically fastened (joined) structures
This specification covers nylon-cloth-reinforced acrylonitrile-butadiene (NBR) rubber in the form of sheet and of shapes molded and cured from partly cured sheet
This specification has been designated as "SUPERSEDED" by the Aerospace Materials Division, SAE, as of September 1991
This SAE Parts Standard provides dimensional and quality assurance requirements for M6 through M36 metric sizes of studs in the following configurations in materials needed for ship system applications: a Continuous thread studs in M thread profile. b Double end studs—clamping type (also called bolt-studs) where both ends are of the same thread series but different lengths (M thread profile
This SAE Part Standard covers selected inch screws, bolts, structural bolts, and nuts manufactured in accordance with ASTM International and SAE fastener standards. Appendix A covers bolt blanks to manufacture fitted bolts of specific materials. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part identification number (PIN) as defined in this document
This SAE Parts Standard provides dimensional and quality assurance requirements for studs in the following configurations in standard materials used for ship system applications: a Continuous thread studs in UNRC and 8UNR series in the following threads and diameters: UNRC threads (1/4 through 4 inches) UNRF threads (1/4 through 1-1/2 inches) 8UNR threads (1-1/8 through 4 inches) b Double end studs (clamping type) where both ends are of the same minimum thread length in the following threads and diameters: UNRC threads (1/4 through 4 inches) UNRF threads (1/4 through 1-1/2 inches) 8UNR threads (1-1/8 through 4 inches) Different thread forms on each end are permissible. c Double end studs (tap end type) where the tap end thread length is equivalent to 1-1/2 nominal diameters: Tap End Thread Forms and Diameters Nut End Thread Forms and Diameters NC-5 interference-fit tap end threads (1/4 through 1-1/2 inches) UNRC threads (1/4 through 4 inches) UNRC threads (1/4 through 4 inches) UNRF
Items per page:
50
1 – 50 of 209318