Search
Advanced Search
of the following are true

Results

Items (207,327)
This document provides background information, rationale, and data (both physical testing and computer simulations) used in defining the component test methods and similarity criteria described in SAE Aerospace Recommended Practice (ARP) 6330. ARP6330 defines multiple test methods used to assess the effect of seat back mounted IFE monitor changes on blunt trauma to the head and post-impact sharp edge generation. The data generated is based on seat and IFE components installed on type A-T (transport airplane) certified aircraft. While not within the scope of ARP6330, generated test data for the possible future development of surrogate target evaluation methods is also included
Aircraft Seat Committee
This SAE Aerospace Recommended Practice (ARP) provides recommendations for: The audit process in general A list of specific areas of attention to be audited Maintaining the test facility in such a manner that it meets audit requirements
EG-1E Gas Turbine Test Facilities and Equipment
This specification covers high-strength, low-alloy steels in the form of sheet and plate up to 4.000 in. (101.60 mm) in nominal thickness
AMS E Carbon and Low Alloy Steels Committee
This specification and its supplementary detail specifications cover three types of nylon in the form of webbing
AMS P Polymeric Materials Committee
This specification covers one type of nylon/polyester in the form of webbing
AMS P Polymeric Materials Committee
This specification defines the equipment, procedures, and requirements for joining leads by parallel gap resistance welding
AMS B Finishes Processes and Fluids Committee
This specification covers a petroleum-base solvent in the form of a liquid
AMS B Finishes Processes and Fluids Committee
This specification covers liquid aqueous cleaners
AMS G9 Aerospace Sealing Committee
This specification covers one type of organic (para-aramid) fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement
AMS P17 Polymer Matrix Composites Committee
This specification covers one type of honeycomb core made of aluminum alloy and supplied in the form of blocks, slices, or other configurations as ordered
AMS D Nonferrous Alloys Committee
This specification covers a low-alloy steel in the form of investment castings
AMS E Carbon and Low Alloy Steels Committee
This specification covers silica gel dehydrating agent in the form of a granular powder in either plain or indicator grades
AMS B Finishes Processes and Fluids Committee
This specification covers a copper-beryllium alloy in the form of sand, investment, or centrifugal castings
AMS D Nonferrous Alloys Committee
This specification covers a corrosion and heat-resistant cobalt alloy in the form of covered welding electrodes
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers a fiberglass reinforced silicone rubber in the form of sheet, strip, and molded parts
AMS CE Elastomers Committee
This specification covers a corrosion and heat resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings, and stock for forging or flash welded rings
AMS F Corrosion and Heat Resistant Alloys Committee
This specification defines the procedures and requirements for fusion welding titanium and titanium alloys and the properties of such weldments
AMS B Finishes Processes and Fluids Committee
This specification covers one type of organic (para-aramid) fiber in the form of roving. The product shall be formed as a number of ends, tows, or strands collected into a parallel bundle with little or no twist
AMS P17 Polymer Matrix Composites Committee
This specification covers one type of organic (para-aramid) fiber in the form of roving. The product shall be formed as a number of ends, tows, or strands collected into a parallel bundle with little or no twist
AMS P17 Polymer Matrix Composites Committee
This specification covers an adhesive compounded from modified epoxy resins in ready-to-use film supplied in rolls or sheets, either supported by mat or by woven monofilaments or unsupported
AMS P17 Polymer Matrix Composites Committee
This specification has been declared "CANCELLED" by the Aerospace Materials Division, SAE, as of April 1996 and has been superseded by AWS A5.11 ENiCrMo-2
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers a corrosion and heat-resistant steel in the form of sheet, strip, and plate
AMS F Corrosion and Heat Resistant Alloys Committee
This specification has been declared "SUPERSEDED" by the Aerospace Materials Division, SAE as of April, 1991
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers one weight and one strength of intermediate modulus aramid cloth
AMS P17 Polymer Matrix Composites Committee
This specification covers one type of parchment in the form of rolls of sheeting or reels of unperforated tape of the width specified
AMS P17 Polymer Matrix Composites Committee
This specification covers a kraft paper, coated on both sides and with different release characteristics on each side (i.e., differentially coated), supplied in the form of rolls of sheeting or reels of unperforated tape of the width specified
AMS P17 Polymer Matrix Composites Committee
The foundation specification (AMS3050) and this category specification (AMS3050/6) cover anti-seize greases conforming to the requirements but using the anti-seize ingredient Nickel and Graphite only
AMS M Aerospace Greases Committee
This specification covers one type of paper in the form of perforated tape of the width specified herein
AMS P17 Polymer Matrix Composites Committee
This specification covers a paper, coated on both sides and with different release characteristics on each side (i.e., differentially coated), supplied in the form of rolls of sheeting or reels of unperforated tape of the width specified
AMS P17 Polymer Matrix Composites Committee
This specification covers the engineering requirements for finishing aircraft parts and assemblies with an engine gray enamel
AMS B Finishes Processes and Fluids Committee
This specification covers the requirements for equipment, materials and procedures to be used in anodic treatments for magnesium base alloys for the purpose of increasing their corrosion resistance or producing surfaces suitable for the application of a protective organic finish
AMS B Finishes Processes and Fluids Committee
This specification and its supplementary detail specifications cover flame resistant cloth woven from various fibers
AMS P Polymeric Materials Committee
This specification covers one weight and one weave of nylon cloth
AMS P Polymeric Materials Committee
This specification covers one weight and one weave of novoloid/aramid cloth
AMS P Polymeric Materials Committee
This specification has been declared "CANCELLED" by the Aerospace Materials Division, SAE, as of Januray 1990
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers an aluminum alloy in the form of sheet and plate 0.020 to 6.000 inches (0.551 to 152.4 mm), inclusive, in thickness (see 8.5
AMS D Nonferrous Alloys Committee
The foundation specification (AMS3050) and this category specification (AMS3050/7) cover anti-seize greases conforming to the requirements, but using the anti-seize ingredient Copper+Graphite+Aluminum only
AMS M Aerospace Greases Committee
The foundation specification (AMS3050) and this category specification (AMS3050/8) cover anti-seize greases conforming to the requirements but using the anti-seize ingredient Graphite+Aluminum only
AMS M Aerospace Greases Committee
This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, and stock for forging of any size (see 8.6
AMS G Titanium and Refractory Metals Committee
This specification covers a corrosion-resistant steel in the form of covered welding electrodes
AMS F Corrosion and Heat Resistant Alloys Committee
This specification covers one type of polyether-type urethane (EU) resin and hardener which, when mixed and cured, produce elastomeric polyurethane products
AMS P Polymeric Materials Committee
This specification covers one weight and one strength of intermediate modulus aramid cloth
AMS P17 Polymer Matrix Composites Committee
This specification covers a hydrocarbon fluid mixture for use as a reference fuel test fluid to evaluate the ability of polymeric compounds to conform to designated requirements after immersion in the fluid at a specific temperature for a specified time, as required by an applicable specification
AMS CE Elastomers Committee
This specification covers a permanently mastic polysulfide compound in the form of a paste
AMS G9 Aerospace Sealing Committee
This specification covers a chloroprene (CR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes
AMS CE Elastomers Committee
This specification covers one width and one breaking strength of low-modulus aramid webbing
AMS P Polymeric Materials Committee
Items per page:
1 – 50 of 207327