Search
Advanced Search
of the following are true

Results

Items (208,190)
ARINC 858 Part 2 provides aviation ground system gateway considerations necessary to transition to the Internet Protocol Suite (IPS). ARINC 858 Part 2 describes the principles of operation for an IPS gateway that enables ACARS application messages to be exchanged between an IPS aircraft and a ground ACARS host. ARINC 858 Part 2 also describes the principles of operation for an IPS gateway that enables OSI-based application messages to be exchanged between an IPS host and an OSI end system. This product was developed in coordination with ICAO WG-I, RTCA SC-223, and EUROCAE WG-108
Airlines Electronic Engineering Committee
This standard is intended to cover cigar or cigarette lighters as well as power outlets based on the form and dimensions of the cigar lighter. This standard is a full performance specification, it includes dimensional and operational parameters as well as performance characteristics which must be met when submitting a cigar lighter assembly or power outlet assembly for production approval. This standard constitutes an acceptance specification for a surface mounted, front-loaded cigar lighter or power outlet
USCAR
This specification covers one type of epoxy-resin-impregnated boron filaments 0.004 inch (0.102 mm) in diameter in the form of continuous tape supported on a glass cloth carrier
AMS P17 Polymer Matrix Composites Committee
This specification covers 45 durometer hardness, high strength silicone rubber
AMS CE Elastomers Committee
The intent of this specification is for the procurement of the material listed on the QPL and, therefore, no qualification or equivalency threshold values are provided. Users that intend to conduct a new material qualification or equivalency program shall refer to the Quality Assurance section of this base specification, AMS3961. All material qualification and equivalency data has been archived and is available for review upon request. Contact the CMH-17 Secretariat (www.cmh17.org) for additional information
AMS P17 Polymer Matrix Composites Committee
This specification covers the requirements for one type of a pilot’s survival, sheathed, hunting knife with a 5-inch blade and sharpening stone
S-9A Safety Equipment and Survival Systems Committee
This specification covers an aluminum alloy in the form of foil
AMS D Nonferrous Alloys Committee
This specification establishes requirements for three types of corrosion preventative coatings for protection of aircraft integral fuel tanks
AMS G8 Aerospace Organic Coatings Committee
This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the supplier's grade or material designation
AMS P17 Polymer Matrix Composites Committee
This specification covers an aluminum alloy in the form of pre-alloyed powder
AMS AM Additive Manufacturing Metals
This specification covers a carbon steel in the form of wire supplied as coils of wire or as finished springs
AMS E Carbon and Low Alloy Steels Committee
The foundation specification (AMS3050) and this category specification (AMS3050/3) cover anti-seize greases conforming to the requirements but using the anti-seize ingredient Nickel only
AMS M Aerospace Greases Committee
This specification covers a highly filled epoxy potting compound supplied as a two-component system
AMS P Polymeric Materials Committee
This specification covers a tin-lead alloy in the form of bars, ingots, pellets, ribbon, and round wire
AMS D Nonferrous Alloys Committee
This specification and its supplementary detail specifications cover silicon dioxide in the form of a white, amorphous powder
AMS P Polymeric Materials Committee
This specification establishes requirements for an interior decorative clear coating for wear protection of metal substrates
AMS G8 Aerospace Organic Coatings Committee
This specification covers a synthetic rubber in the form of sheet, strip, tubing, extrusions, and molded shapes
AMS CE Elastomers Committee
No scope available
Engine and Airframe Technical Standards Committee (TSC)
This specification and its supplementary detail specifications cover two types of nylon and one type of nylon/polyester in the form of webbing
AMS P Polymeric Materials Committee
This specification covers bonded honeycomb core made of aluminum alloy and supplied in the form of blocks, slices, or other configurations as ordered
AMS D Nonferrous Alloys Committee
This specification and its supplementary detail specifications cover para-aramid materials in the form of thread
AMS P Polymeric Materials Committee
This specification covers requirements for poly-monochloro-para-xylylene coatings
AMS B Finishes Processes and Fluids Committee
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips, and a viscous mixture (paste) of powder in a suitable binder
AMS D Nonferrous Alloys Committee
This specification covers aluminum alloy die castings
AMS D Nonferrous Alloys Committee
This specification covers one type of metallized nylon cloth
AMS P Polymeric Materials Committee
This specification covers a urea compound in the form of a solid
G-12 Aircraft Ground Deicing Steering Group
This specification covers one width and strength of nylon tape
AMS P Polymeric Materials Committee
This specification covers one weight and one type of finish of nylon cloth
AMS P Polymeric Materials Committee
The CDIF Family of Standards is primarily designed to be used as a description of a mechanism for transferring information between CASE tools. It facilitates a successful transfer when the authors of the importing and exporting tools have nothing in common except an agreement to conform to CDIF. The language that is defined for the Transfer Format also has applicability as a general language for Import/Export from repositories. The CDIF Integrated Meta-model defined for CASE also has applicability as the basis of standard definitions for use in repositories. The standards that form the complete family of CDIF Standards are documented in EIA/IS-106 CDIF - CASE Data Interchange Format - Overview. These standards cover the overall framework, the transfer format and the CDIF Integrated Meta-model. The diagram in Figure 1 depicts the various standards that comprise the CDIF Family of Standards. The shaded box depicts this Standard and its position in the CDIF Family of Standards. This
Systems Management Council
The CDIF Family of Standards is primarily designed to be used as a description of a mechanism for transferring information between CASE tools. It facilitates a successful transfer when the authors of the importing and exporting tools have nothing in common except an agreement to conform to CDIF. The language that is defined for the Transfer Format also has applicability as a general language for Import/Export from repositories. The CDIF Integrated Meta-model defined for CASE also has applicability as the basis of standard definitions for use in repositories. The standards which form the complete family of CDIF Standards are documented in EIA/IS-106 CDIF - CASE Data Interchange Format - Overview. These standards cover the overall framework, the transfer format and the CDIF Integrated Meta-model. The diagram in Figure 1 depicts the various standards that comprise the CDIF Family of Standards. The shaded box depicts this Standard and its position in the CDIF Family of Standards. This
Systems Management Council
The CDIF Family of Standards is primarily designed to be used as a description of a mechanism for transferring information between CASE tools. It facilitates a successful transfer when the authors of the importing and exporting tools have nothing in common except an agreement to conform to CDIF. The language that is defined for the Transfer Format also has applicability as a general language for Import/Export from repositories. The CDIF Integrated Meta-model defined for CASE also has applicability as the basis of standard definitions for use in repositories. The standards which form the complete family of CDIF Standards are documented in EIA/IS-106 CDIF - CASE Data Interchange Format - Overview. These standards cover the overall framework, the transfer format and the CDIF Integrated Meta-model. The diagram in Figure 1 depicts the various standards that comprise the CDIF Family of Standards. The shaded box depicts this Standard and its position in the CDIF Family of Standards. This
Systems Management Council
This SAE Standard defines the basic structural elements, and guidance on compilation and management, for a software supportability program. Software supportability considerations include initial design influence and through-life support embracing the operational use, post-delivery modification, and logistics management of software. This document requires that the processes of design, development, selection, and production of software include software supportability considerations, as relevant to particular project needs
G-41 Reliability
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Items per page:
1 – 50 of 208190