Your Selections

TEMSFCCS5
Show Only

Collections

File Formats

Content Types

Dates

Sectors

Topics

Publishers

Committees

Committee Codes

Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending, Flaring, Cold Forming and Brazing

Metallic Tubing Committee
  • Ground Vehicle Standard
  • J2833_201806
  • Current
Published 2018-06-15 by SAE International in United States
This specification covers stress relieved annealed electric resistance welded and cold-drawn single-wall high strength low alloy steel tubing intended for use in hydraulic pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, cold forming, and brazing. The grade of material produced to this specification is of micro-alloy content. Nominal reference working pressures for this tubing are listed in ISO 10763 and SAE J1065. CAUTION: Sub-critically annealed steels are often produced using anneal temperatures below the Lower Critical Temperature (AC1) of the given steel to achieve the desired strength levels. Welding, brazing, or other processing methods that subject the tube material or assembly to temperatures near or above AC1 might initiate isothermal transformation of the tube microstructure and compromise the strength of the tube in the heat affected zone by further annealing the tube. Therefore, ISO 10763 and SAE J1065 nominal reference working pressures might not be applicable. It is recommended that the user and the fabricator validate and agree that the tube assembly design and pressure ratings are not…
Datasets icon
Annotation icon

Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements

Metallic Tubing Committee
  • Ground Vehicle Standard
  • J2551/2_201804
  • Current
Published 2018-04-09 by SAE International in United States
These recommended practices provide recommendations for general specifications and performance requirements of carbon, alloy and high strength low alloy steel tube assemblies for fluid power applications utilizing commonly available manufacturing methods and general guidelines for tube selection and application.
Datasets icon
Annotation icon

Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication

Metallic Tubing Committee
  • Ground Vehicle Standard
  • J2551/1_201804
  • Current
Published 2018-04-09 by SAE International in United States
These recommended practices provide general recommendations for designing and fabricating carbon, alloy and high strength low alloy steel tube assemblies for fluid power applications utilizing commonly available manufacturing methods and general guidelines for tube selection and application.
Datasets icon
Annotation icon

Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement

Metallic Tubing Committee
  • Ground Vehicle Standard
  • J2551/3_201804
  • Current
Published 2018-04-09 by SAE International in United States
SAE J2551-3 recommended practice provides recommendations for a procurement process for carbon, alloy and high strength low alloy steel tube assemblies for fluid power applications utilizing commonly available manufacturing methods and general guidelines for tube selection and application.
Datasets icon
Annotation icon

Welded and Cold-Drawn, High Strength (500 MPa Tensile Strength) Hydraulic Tubing, for Bending, Flaring, Cold Forming, Welding and Brazing

Metallic Tubing Committee
  • Ground Vehicle Standard
  • J2614_201801
  • Current
Published 2018-01-10 by SAE International in United States
This specification covers sub-critically annealed or normalized electric resistance welded and cold-drawn single-wall high strength steel tubing intended for use in hydraulic pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, cold forming, welding and brazing. Nominal reference working pressures for this tubing are listed in ISO 10763 for metric tubing and SAE J1065 for inch tubing. This specification also covers SAE J2614 Type-A tubing. The mechanical properties and performance requirements of standard SAE J2614 and SAE J2614 Type-A are the same. The designated differences of Type-A tubing do not imply that Type-A tubing is in anyway inferior to standard SAE J2614. The Type-A designation is meant to address unique manufacturing differences between sub-critically annealed and normalized tubing. Tube assembly configurations made to specific geometry and components requiring thermal attachment methods in association with the sub-critically annealed material, may require qualification testing in accordance with ISO 19879. The use of Type-A material avoids this systemic testing as thermal processes will not compromise the structural integrity of the Type-A tube…
Datasets icon
Annotation icon

Brazed Double Wall Low-Carbon Steel Tubing

Metallic Tubing Committee
  • Ground Vehicle Standard
  • J527_201710
  • Current
Published 2017-10-25 by SAE International in United States
This SAE Standard covers brazed double wall low-carbon steel tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a suitable quality for bending, flaring, beading, forming, and brazing.
Datasets icon
Annotation icon

Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Hydraulic Tubing, for Bending, Double Flaring, Cold Forming, Welding, and Brazing

Metallic Tubing Committee
  • Ground Vehicle Standard
  • J2613_201710
  • Current
Published 2017-10-12 by SAE International in United States
This SAE Standard covers sub-critically annealed or normalized electric resistance welded flash controlled single-wall high strength steel tubing intended for use in hydraulic pressure lines and in other applications requiring tubing of a quality suitable for bending, double flaring, cold forming, welding and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path caused by the ID weld bead. Nominal reference working pressures for this tubing are listed in ISO 10763 for metric tubing and SAE J1065 for inch tubing. This specification also covers SAE J2613 Type-A tubing. The mechanical properties and performance requirements of standard SAE J2613 and SAE J2613 Type-A are the same. The designated differences of Type-A tubing do not imply that Type-A tubing is in anyway inferior to standard SAE J2613. The Type-A disignation is meant to address the unique manufacturing differences between sub-critically annealed and normalized tubing. Tube assembly configurations made to specific geometry and components requiring thermal attachment methods in association with the sub-critically annealed material, may…
Datasets icon
Annotation icon

Tests and Procedures for Carbon Steel and High Strength Low Alloy Steel Tubing

Metallic Tubing Committee
  • Ground Vehicle Standard
  • J1677_201612
  • Current
Published 2016-12-07 by SAE International in United States
This SAE Standard is intended to establish uniform methods for testing certain types of carbon steel and high strength, low alloy steel tubing as listed in section 2.1.1. The specified test and performance criteria applicable to each variety of tubing are set forth in the respective SAE J Specifications.
Datasets icon
Annotation icon

Welded Low-Carbon Steel Tubing Suitable for Bending, Flaring, Beading, Forming and Brazing

Metallic Tubing Committee
  • Ground Vehicle Standard
  • J526_201611
  • Current
Published 2016-11-18 by SAE International in United States
The SAE J526 Standard covers electric-resistance welded single-wall low-carbon steel pressure tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a quality suitable for bending, flaring, beading, forming, and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path that would be caused by the ID weld bead or scarfed region. Assumption of risks when using this material for single flare applications shall be defined by agreement between the producer and tube purchaser. The material produced to this specification is intended to service pressure applications where severe forming and bending is not required. As this material may exhibit mechanical properties that reduce some desired forming characteristics versus SAE J356, the severity of the forming requirements of the finished assembly should be considered when utilizing material produced to this specification.
Datasets icon
Annotation icon

Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring

Metallic Tubing Committee
  • Ground Vehicle Standard
  • J525_201609
  • Current
Published 2016-09-09 by SAE International in United States
This SAE Standard covers normalized electric-resistance welded, cold-drawn, single-wall, low-carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, forming, and brazing. In an effort to standardize within a global marketplace and ensuring that companies can remain competitive in an international market it is the intent to convert to metric tube sizes which will: Lead to one global system Guide users to preferred system Reduce complexity Eliminate inventory duplications
Datasets icon
Annotation icon