Search
Advanced Search
of the following are true
(
)

Results

Items (215,939)
Missile Hydraulic Pumps and Their Power SourcesAIR560D (Current)
This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.
A-6C4 Power Sources Committee
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .375-24 UNJF-3AAS3117B (Current)3/23/2026
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, UNS S66286, .5625-18 UNJF-3AAS3120B (Current)3/23/2026
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .4375-20 UNJF-3AAS3118B (Current)3/23/2026
E-25 General Standards for Aerospace and Propulsion Systems
STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, UNS S66286 .3125-24 UNJF-3A X .2500-28 UNJF-3AAS3140C (Current)3/23/2026
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES (UNS S66286), .5000-20 UNJF-3AAS3119B (Current)3/23/2026
E-25 General Standards for Aerospace and Propulsion Systems
STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, UNS S66286 .2500-28 UNJF-3A X .1900-32 UNJF-3AAS3139C (Current)3/23/2026
E-25 General Standards for Aerospace and Propulsion Systems
STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, UNS S66286 .3750-24 UNJF-3A X .3125-24 UNJF-3AAS3141C (Current)3/23/2026
E-25 General Standards for Aerospace and Propulsion Systems
Shaft Nut and Keywasher Installation Dimensions forAS1495B (Current)3/20/2026
The purpose of this Standard is to provide installation dimensions for shaft nuts and their companion keywasher. The Standard type typically shown on MS9951 and MS9952, but is also suitable for parts which are dimensionally equivalent.
E-25 General Standards for Aerospace and Propulsion Systems
STUD - STRAIGHT, DRILLED, .2500-20UNS X .2500-28UNF-3AAS128363B (Current)3/20/2026
E-25 General Standards for Aerospace and Propulsion Systems
NUT, SPANNER, AERONAUTICAL, UNS G41400AS172321B (Current)3/20/2026
E-25 General Standards for Aerospace and Propulsion Systems
STUD, LOCKED IN - RING, STRAIGHT, HOLE PREPARATION FORAS1620A (Current)3/20/2026
E-25 General Standards for Aerospace and Propulsion Systems
STUD - STRAIGHT, NECKED, .3750-16UNS X .3750-24UNF-3AAS126881B (Current)3/20/2026
E-25 General Standards for Aerospace and Propulsion Systems
STUD - STRAIGHT, WAISTED, .4375-14 X .4375-20UNF-3AAS127193B (Current)3/20/2026
E-25 General Standards for Aerospace and Propulsion Systems
STUD - STRAIGHT, DRILLED, STEEL (SAE 8740), CADMIUM PLATED, .3750-16UNS X .3750-24UNF-3AAS129293B (Current)3/20/2026
E-25 General Standards for Aerospace and Propulsion Systems
RING, RETAINING-SPIRAL, EXTERNAL, LIGHT DUTY, CRESAS3218C (Current)3/20/2026
E-25 General Standards for Aerospace and Propulsion Systems
RING, RETAINING-SPIRAL, EXTERNAL, HEAVY DUTY, CRES (UNS S30200)AS3216C (Current)3/20/2026
E-25 General Standards for Aerospace and Propulsion Systems
STUD - STRAIGHT, DRILLED, .3125-18UNS X .3125-24UNF-3AAS128687B (Current)3/20/2026
E-25 General Standards for Aerospace and Propulsion Systems
Aqueous Cleaners for Cleaning Prior to Application of Sealing CompoundsAMS3168 (Current)11/19/2001
This specification covers liquid aqueous cleaners.
AMS G9 Aerospace Sealing Committee
Centrifugal Steel Castings Chromium Molybdenum 38-45AMS5345 (Current)12/16/2002
AMS F Corrosion and Heat Resistant Alloys Committee
Aluminum Alloy 6066, Bar, Rod, Shapes, Tube, and Wire, ExtrudedAMSQQA200/10A (Current)6/18/2007
This specification covers the specific requirements for aluminum alloy 6066 bar, rod, shapes, tube, and wire produced by extrusion.
AMS D Nonferrous Alloys Committee
Bars and Forgings, 14cr 4.0mo (1.00-1.10c)AMS5619A (Current)7/1/2000
Primarily for parts requiring resistance to both corrosion and wear with hardness retained during exposure to temperatures up to 600 F (316 C).
AMS F Corrosion and Heat Resistant Alloys Committee
Hydraulic Fluid, Nonflammable Chlorotrifluoroethylene (Ctfe) BaseAMS3185A (Current)9/1/1999
This specification covers a nonflammable hydraulic fluid, composed with a chlorotrifluoroethylene (CTFE) base, in the form of a liquid. This fluid has been used typically for hydraulic systems of aircraft and selected armored vehicles for usage in the temperature range -65 to +275 degrees F (-54 to +135 degrees C), but usage is not limited to such applications.
AMS B Finishes Processes and Fluids Committee
Titanium Alloy, 5.4al 1.4cr 1.3fe 1.25mo Annealed 135,000 Psi YieldAMS4929 (Current)12/16/2002
AMS G Titanium and Refractory Metals Committee
ALUMINUM ALLOY WELDING WIRE 7.0Si - 0.30Mg (A356.0)AMS4188/4 (Current)12/16/2002
This specification covers an aluminum alloy in the form of extruded or drawn welding wire.
AMS D Nonferrous Alloys Committee
Cleaning Compounds, For Parts Washers and Spray CabinetsAMSC29602A (Current)7/9/2012
This specification establishes the requirements for cleaning compounds, used in parts washers and spray cabinets for cleaning aircraft components.
AMS J Aircraft Maintenance Chemicals and Materials Committee
Tolerances, Metric, Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and PlateMAM2242D (Current)9/13/2007
This specification covers established manufacturing tolerances applicable to sheet, strip, and plate of corrosion and heat resistant steels, iron alloys, titanium, and titanium alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term 'excl' is used to apply only to the higher figure of the specified range.
AMS F Corrosion and Heat Resistant Alloys Committee
Aluminum Alloy, Sheet and Plate 4.5cu 1.5mg 0.60mn (2024-T86) Width Over 48 to 60 In., Incl.AMS4105 (Current)12/16/2002
AMS D Nonferrous Alloys Committee
Magnesium Alloy Castings Sand 9 Al 2 Zn as CastAMS4430 (Current)12/16/2002
AMS D Nonferrous Alloys Committee
Tolerances, Metric, Carbon Steel, Sheet, Strip, and PlateMAM2232C (Current)6/18/2007
This specification covers established metric manufacturing tolerances applicable to carbon steel sheet, strip, and plate ordered to metric dimensions. These tolerances apply to all conditions unless otherwise noted. The term "excl" is used to apply only to the higher figure of the specified range. Tolerances for product sizes not listed herein shall be as agreed upon by purchaser and vendor.
AMS E Carbon and Low Alloy Steels Committee
Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 5052AMSQQA225/7A (Current)8/24/2007
This specification covers the specific requirements for 5052 aluminum alloy bar, rod, and wire produced by rolling, drawing, or cold finishing.
AMS D Nonferrous Alloys Committee
Magnesium Alloy Castings, Sand, 3.3Th - 0.75Zr (HK31A-T6), Solution and Precipitation Heat TreatedAMS4445G (Current)6/21/2006
This specification covers a magnesium alloy in the form of sand castings.
AMS D Nonferrous Alloys Committee
Washers, Spring Lock, Corrosion Resistant Steel, 18Cr - 9NiAMS7241C (Current)8/24/2007
This specification covers plain helical lock washers fabricated from corrosion-resistant steel.
AMS E Carbon and Low Alloy Steels Committee
Magnesium Alloy Castings, Sand, 2.5Ag - 1.1Th - 1.0Di - 0.70Zr (QH21-T6), Solution and Precipitation Heat TreatedAMS4419C (Current)6/21/2006
This specification covers a magnesium alloy in the form of sand castings.
AMS D Nonferrous Alloys Committee
Steel Tubing, Seamless, 0.50cr 0.55ni 0.20mo (0.28 0.33c)AMS6535H (Current)7/1/2001
Primarily for use where welding and moderate tensile properties are required. May be used where minimum tensile strength up to 180,000 psi (1240 MPa) is required for wall thicknesses up to 0.125 in. (3 mm) and proportionately lower strength is required in heavier thicknesses. This specification has been declared "Noncurrent" by the Aerospace Materials Division, SAE, as of 19 April 1988. It is recommended, therefore, that this specification not be specified for new designs.
AMS E Carbon and Low Alloy Steels Committee
ANGLE - BULB SECTION EXTRUDEDAMS10135B (Current)3/20/2012
AMS D Nonferrous Alloys Committee
Reference Fluid for Testing Hydrocarbon Fuel Resistant Materials: 10% Aromatic ContentAMS3022D (Current)9/23/2011
This specification covers a hydrocarbon fluid mixture for use as a reference fuel test fluid to evaluate the ability of polymeric compounds to conform to designated requirements after immersion in the fluid at a specific temperature for a specified time, as required by an applicable specification.
AMS CE Elastomers Committee
Aerodynamic Fairing Compound −55° to +150°C (−65° to +300°F)AMS3697C (Current)1/17/2012
This specification covers a two-component air-curing, aluminum-powder-filled, epoxy-resin-base material in the form of a paste or putty, suitable for application by spatula or putty-knife.
AMS G9 Aerospace Sealing Committee
Bearings, Leaded Bronze, 74Cu - 15.5Pb - 10Sn, Steel BackAMS4825D (Current)8/3/2006
This specification covers bearings of a leaded bronze cast on one or both faces of a steel backing.
AMS D Nonferrous Alloys Committee
Tolerances, Metric, Titanium and Titanium Alloy TubingMAM2245C (Current)8/24/2007
This specification covers established manufacturing tolerances applicable to titanium and titanium alloy extruded bars, rods, and shapes ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" applies only to the higher figure of the specified range.
AMS G Titanium and Refractory Metals Committee
Aluminum Alloy, Castings, Sand, 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (206.0-T71), Solution Heat Treated and Naturally AgedAMS4237B (Current)4/13/2007
This specification covers an aluminum alloy in the form of sand castings.
AMS D Nonferrous Alloys Committee
Resin, Polyether Urethane (EU) Casting Flexible, Solid, UnfilledAMS3571C (Current)9/23/2011
This specification and its supplementary detail specifications cover polyether-type urethane (EU) resins and hardeners which, when mixed and cured, produce elastomeric polyurethane products.
AMS P Polymeric Materials Committee
Varnish, Phenolic Resin Corrosion-PreventiveAMS3132J (Current)1/16/2012
This specification covers a colored but unpigmented varnish based on a phenolic resin.
AMS G8 Aerospace Organic Coatings Committee
Grease, Pneumatic SystemAMSG4343A (Current)8/10/2012
This specification covers a pneumatic system grease. This grease is identified by NATO Code Number G 392 (see 6.5).
AMS M Aerospace Greases Committee
CHANNEL - EXTRUDEDAMS10137B (Current)3/20/2012
AMS D Nonferrous Alloys Committee
Aluminum Alloy 5456, Plate and SheetAMSQQA250/9B (Current)3/2/2012
This specification covers the specific requirements for 5456 aluminum alloy plate and sheet; the general requirements are covered in AMS-QQ-A-250.
AMS D Nonferrous Alloys Committee
Silicone Rubber Extreme Low-Temperature Resistant 45 - 55AMS3335E (Current)11/7/2011
This specification covers an extreme-low-temperature-resistant silicone rubber in the form of sheet, strip, tubing, extrustions, and molded shapes.
AMS CE Elastomers Committee
Sealing Compound Two-Part, Addition Cured Silicone (Type 2) Firewall SealantAMS3374/2A (Current)2/18/2011
This specification covers two-part, addition cured, high temperature resistant silicone sealing compounds.
AMS G9 Aerospace Sealing Committee
Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Improved Performance at 275°F (135°C) for Use in Boss Fittings, Sizes and TolerancesAMSP83461/2A (Current)3/6/2011
The purpose of this specification sheet is to set up a standardized part numbering system for O-rings procured to MIL-P-83461 for use in straight thread tube boss fittings.
A-6C2 Seals Committee
TUNGSTEN CARBIDE-COBALT POWDER Sintered and CrushedAMS7880A (Current)8/15/2011
This specification covers tungsten carbide-cobalt in the form of powder.
AMS B Finishes Processes and Fluids Committee
Items per page:
1 – 50 of 215939