Search
Advanced Search
of the following are true
(
)

Results

Items (219,531)
Aircraft Pressures and Temperatures – Resource DocumentAIR8471 (Current)
This SAE AIR covers Forced Air technology including: reference material, equipment, safety, operation, and methodology. It is intended to provide pressure and temperature (temps pages 26 & 31) information and minimum safety guidelines regarding use of equipment to remove frozen contaminants related to: i) Forced air ii) Forced air/fluid iii) Deicing fluid
G-12M Methods Committee
Aircraft Skin Pressures and TemperaturesAIR8469 (Current)
This information report covers all known aircraft with respect to deicing operations, especially with regard to OEM pressure and temperature limitations on the airframe. It provides data for airlines/operators on compliance with OEM limits and confirms that OEM limits are not exceeded during deicing operations.
G-12M Methods Committee
Missile Hydraulic Pumps and Their Power SourcesAIR560D (Current)
This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.
A-6C4 Power Sources Committee
Numerical Modeling Techniques for Jet Engine Test Cell AerodynamicsAIR6355 (Current)6/5/2026
This SAE Aerospace Information Report (AIR) has been written for individuals associated with ground level testing of turbofan and turbojet engines, and particularly for those who might be interested in investigating steady-state performance characteristics of a new test cell design or of proposed modifications to an existing test cell by means of numerical modeling and simulation. It is not the intent of this standard to provide specific test cell design recommendations, which are covered in the reference documentation.
EG-1E Gas Turbine Test Facilities and Equipment
BOLT, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS N07001, 165 KSI, .4375-20 UNJF-3AAS9727A (Current)6/3/2026
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL SAE 8740, CADMIUM PLATED, 125 KSI MIN UTS, .4375-20 UNJF-3AAS9918C (Current)6/3/2026
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3AAS9676C (Current)6/3/2026
E-25 General Standards for Aerospace and Propulsion Systems
Driveline Parking Brake Test Procedure for Medium Duty VehiclesJ2690_202606 (Current)6/3/2026
This SAE Recommended Practice establishes uniform test procedures for friction based parking brake components used in conjunction with hydraulic service braked vehicles with a gross vehicle weight rating greater than 4500 kg (10 000 lb). The components covered in this document are the primary actuation and the foundation park brake. Various peripheral devices such as application dashboard switches or indicators are not included. These test procedures include the following: a Brake Related Tests 1 Brake Functional Performance 2 Brake Dynamic Torque Performance 3 Brake Corrosion Resistance 4 Brake Endurance with Torque 5 Brake Endurance without Torque 6 Vibration Resistance 7 Brake Ultimate Static Load 8 Brake Lining Wear Adjuster Function b Actuation Related Tests 1 Mechanical Actuator Functional Performance 2 Mechanical Actuator Endurance 3 Mechanical Actuator Quick Release 4 Mechanical Actuator Ultimate Load 5 Spring Apply Actuator Functional Performance 6 Spring Apply Actuator
Truck and Bus Hydraulic Brake Committee
WASHER, KEY - 90°, LOCKING, CRES, UNS S32100AS9581D (Current)6/3/2026
E-25 General Standards for Aerospace and Propulsion Systems
Gas Turbine Emission Probe FactorsAIR4068B (Current)5/15/2012
This report describes the concept and data analysis of the probe factor (pf) scheme. Conclusions are drawn and recommendations made for action to further the requirements for improved methods and procedures in emissions sampling technology.
E-31G Gaseous Committee
Cleaner, Carpet Shampoo TypeAMS1630D (Current)11/22/2024
This specification covers a shampoo type carpet cleaner in the form of a liquid.
AMS J Aircraft Maintenance Chemicals and Materials Committee
Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings 50.5Co - 26Cr - 15Ni - 6.0Mo (Stellite® 30) As-CastAMS5380H (Current)7/22/2025
This specification covers a corrosion- and heat-resistant cobalt alloy in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Aluminum Alloy, Sheet and Plate Copper Manganese Magnesium (17 S-T)AMS4032C (Current)4/1/1946
AMS D Nonferrous Alloys Committee
Flexure Testing of Hydraulic Tubing Joints and FittingsARP1185C (Current)4/23/2019
This SAE Aerospace Recommended Practice (ARP) establishes flexure test procedures to determine and classify the fatigue strengths of reconnectable or permanent hydraulic tube joints. The procedure is intended for conducting flexure tests of fittings and joints for hydraulic tubing materials such as AMS 5561 (21Cr-6Ni-9Mn) steel or AMS 4944 (3AL-2.5V) titanium. A mean stress is applied by holding system pressure in the specimens and flexing in a rotary or planar bending test machine.
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) Vacuum Melted, Vacuum Cast As CastAMS5401C (Current)5/16/2023
This specification covers a corrosion and heat-resistant, vacuum melted, nickel alloy in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Columbium (Niobium) Sheet, Strip, and FoilAMS7850F (Current)3/25/2026
This specification covers columbium in the form of sheet, strip, plate, and foil.
AMS G Titanium and Refractory Metals Committee
TechAmerica Technical Fellow and Associate Technical Fellow Nomination and Selection HandbookGEIAOP0003 (Current)4/1/2007
This handbook details the TechAmerica Technical Fellowship Selection Process. It identifies the tasks to be performed and associates them with participants in the process. The focus is intended to keep the process implementation as uniform as possible. There are three types of information in this handbook: Process details Candidate Application Package format Process infrastructure and description Each Section of this handbook describes a significant segment of the selection process. There are also appendices that contain a variety of supporting material relevant to the different process participants.
Systems Management Council
Vehicle, Magnetic Particle Inspection Petroleum BaseAMS2641D (Current)9/12/2025
This specification covers two types of refined hydrocarbon compounds in the form of liquids. This specification only covers newly manufactured materials.
AMS K Non Destructive Methods and Processes Committee
Wheel and Brake (Sand and Permanent Mold) Castings - Minimum Requirements for Aircraft ApplicationsAS586C (Current)1/6/2011
This SAE Aerospace Standard (AS) sets forth the minimum quality required for aircraft wheel and brake castings. Its use will establish minimum acceptable requirements for internal structure and surface conditions and is predicated on the use of a casting factor for the ultimate load of more than 1.51 through 2.00. When casting factors of 1.25 through 1.50 are used, visual, penetrant, and radiographic or other approved equivalent nondestructive inspection methods shall all be required on each production casting. Where specific parts, or areas of parts, require a quality level exceeding that described by this document, the requirements shall be established by negotiation between the purchaser and vendor.
A-5A Wheels, Brakes and Skid Controls Committee
Flange - ThermocoupleARP465C (Current)6/12/2024
This SAE Aerospace Recommended Practice (ARP) provides guidance for the design of flanges on temperature sensors intended for use in gas turbine engines. Three figures detail the configuration of standard size flange mounts with bolt holes, slotted flanges, and miniaturized flanges for small probes.
E-32 Aerospace Propulsion Systems Health Management
SNAP RING - PROPELLER HUB TAPER TYPE - NUMBER 0AS360 (Current)3/1/1962
Aluminum Alloy, Extrusions, 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511), Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, and StraightenedAMS4165K (Current)3/25/2025
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing produced with cross-sectional area of 32 square inches (206 cm2), maximum (see 8.6).
AMS D Nonferrous Alloys Committee
Method Selection for Assessment of Nonconforming Levels in Parts Per Million (PPM)EIA554A (Current)9/1/2002
This standard is intended to provide guidance for selecting standardized methods for estimating the proportion nonconforming expressed as PPM. These methods are contained in EIA 554-1, EIA 554-2 and EIA 591.
Systems Management Council
Unit Production Cost Tracking Model UPCT 6EDIB1B (Current)8/1/2015
G-47 Systems Engineering
Steel, Corrosion-Resistant, Investment Castings, 16Cr - 1.9Ni - 0.08N (431), As CastAMS5353G (Current)4/12/2026
This specification covers a corrosion-resistant steel in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, CATEGORY 7, 1/4 PERIMETERAS85049/96C (Current)4/26/2021
AE-8C1 Connectors Committee
Steel Welding Electrode, Covered, Corrosion and Heat Resistant 28.5cr 9.5niAMS5785F (Current)3/1/1999
This specification covers a corrosion and heat resistant steel in the form of covered welding electrodes.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock, 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (A286), Consumable Electrode Melted, 1750 °F (954 °C) Solution Heat Treated, Welding Grade, Precipitation HardenableAMS5895G (Current)4/24/2026
This specification covers a corrosion- and heat-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash-welded rings, and stock for forging, flash-welded rings, or heading.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Corrosion-Resistant, Investment Castings, 17Cr - 0.55Mo (0.95 - 1.20C) (440C), AnnealedAMS5352H (Current)3/12/2026
This specification covers a corrosion-resistant steel in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock, 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S (203 EZ), Free Machining, Solution Heat TreatedAMS5762H (Current)10/3/2025
This specification covers a free-machining, corrosion-resistant steel in the form of bars, wire, forgings, and forging stock.
AMS F Corrosion and Heat Resistant Alloys Committee
Alloy Bars and Forgings, Corrosion and Heat Resistant, 54ni 17.5cr 16.5co 4.0mo 2.9ti 2.9al 0.006b, Vacuum Melted, Solution Heat TreatedAMS5753C (Current)3/1/1999
This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, and stock for forging or heading. Primarily for parts, such as turbine blades, bolts, and fittings, requiring high strength up to 1600 degrees F (870 degrees Centigrade) and oxidation resistance up to 1800 degrees F (980 degrees C). This specification has been declared "Noncurrent" by the Aerospace materials Division, SAE, as of October 16, 1987. It is recommended, therefore, that this specification not be specified for new designs.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 8Ni (SAE 30301) Solution Heat TreatedAMS5901D (Current)3/21/2022
This specification covers a corrosion-resistant steel in the form of sheet, strip, and plate.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (302) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile StrengthAMS5903D (Current)3/27/2024
This specification covers a corrosion-resistant steel in the form of sheet, strip, and plate over 0.005 inch (0.13 mm) in nominal thickness.
AMS F Corrosion and Heat Resistant Alloys Committee
Labels, Aluminum Foil-Etched, Anodized, and DyedAMS7292A (Current)10/1/1998
For use on surfaces which may be subject to abrasion and weathering at temperatures up to 300 degrees F. This specification has been declared "Noncurrent" by the Aerospace Materials Division, SAE, as of April 2, 1987. It is recommended that this specification not be specified for new designs.
AMS D Nonferrous Alloys Committee
Steel, Nitriding, Bars, Forgings, Mechanical Tubing, and Forging Stock 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C) (135 Mod) Aircraft QualityAMS6470R (Current)12/3/2024
This specification covers an aircraft-quality nitriding grade low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
AMS E Carbon and Low Alloy Steels Committee
Fluid, Reference for Testing Di-Ester (Polyol) Resistant MaterialAMS3021G (Current)3/27/2024
This specification covers a neopentyl polyol ester fluid.
AMS CE Elastomers Committee
Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (302) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile StrengthAMS5904D (Current)3/27/2024
This specification covers a corrosion-resistant steel in the form of sheet and strip over 0.005 inch (0.13 mm) in nominal thickness.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, and Forging Stock 13Cr (0.30 - 0.40C) (420F, 420FSe) Free-Machining Grade, AnnealedAMS5620J (Current)3/20/2023
This specification covers two types of corrosion- and heat-resistant steel in the form of bars, wire, forgings, and forging stock.
AMS F Corrosion and Heat Resistant Alloys Committee
Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Rings, Extrusions, and Stock for Forgings and Rings, 61Ni - 20.5Cr - 8.5Mo - 3.4Cb(Nb) - 1.3Ti - 5.0Fe (Alloy 716), Consumable Electrode or Vacuum Induction Melted, Solution Heat TreatedAMS5854D (Current)10/16/2025
This specification covers a corrosion- and heat-resistant nickel alloy in the form of bars, wire, forgings, flash-welded rings, and extrusions 4 inches (102 mm) and under in nominal diameter or least distance between parallel sides and stock for forging or flash-welded rings.
AMS F Corrosion and Heat Resistant Alloys Committee
Cobalt Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Co - 27Cr - 2.8Ni - 5.5Mo (Stellite® 21) As-CastAMS5385J (Current)7/18/2025
This specification covers a corrosion- and heat-resistant cobalt alloy in the form of investment castings.
AMS F Corrosion and Heat Resistant Alloys Committee
Plastic Moldings and Extrusions, Cellulose Acetate ButyrateAMS3624D (Current)4/1/1993
This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of October 1995.
AMS P Polymeric Materials Committee
Steel Bars and Forgings and Forging Stock, Carburizing, Aircraft Quality, 1.8Ni - 0.25Mo - (0.15 - 0.20C), (SAE 4617)AMS6292L (Current)3/27/2024
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, and forging stock.
AMS E Carbon and Low Alloy Steels Committee
Steel Bars, Forgings, and Tubing 0.80Cr - 1.0Ni - 0.25Mo (0.38 - 0.43C) (SAE 9840)AMS6342K (Current)9/2/2015
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
AMS E Carbon and Low Alloy Steels Committee
Steel, Corrosion Resistant, Bars, Wire, and Forgings, 13Cr (0.30-0.40C) (51420), AnnealedAMS5621H (Current)5/18/2021
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, and forging stock.
AMS F Corrosion and Heat Resistant Alloys Committee
Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Aircraft QualityAMS6358M (Current)7/14/2025
This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
AMS E Carbon and Low Alloy Steels Committee
Steel, Tool, High Speed Bars and ForgingsAMS5626E (Current)1/1/1997
This specification has been 'Cancelled' by the Aerospace Materials Division, SAE, as of January 1997. Alloy: T1 UNS Number: T12001
AMS F Corrosion and Heat Resistant Alloys Committee
Corrosion Removing Compound for Aircraft SurfacesAMS1640D (Current)2/12/2024
This specification establishes requirements for a corrosion-removing compound in the form of a liquid concentrate.
AMS J Aircraft Maintenance Chemicals and Materials Committee
Cleaner, Water Base, Aircraft interior Hard Surface MaterialsAMS1550B (Current)2/23/2012
This specification covers a water-base cleaner in the form of a concentrated liquid.
AMS J Aircraft Maintenance Chemicals and Materials Committee
Liquid Filter Ratings, Parameters and TestsAIR887C (Current)4/29/2021
This SAE Aerospace Information Report (AIR) identifies and explains the meaning of various ratings and terms used to describe the physical characteristics of liquid filter elements. The significance of various filter parameters is discussed. In addition, a number of filter test methods are briefly described. This AIR and the data presented are only applicable where the system liquid wets the filter elements.
A-6C1 Fluids and Contamination Control Committee
Cast Rods, Tubes and Shapes, Methyl Methacrylate PlasticAMS3580D (Current)7/1/1992
This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of October 1995.
AMS P Polymeric Materials Committee
Items per page:
1 – 50 of 219531