Results
This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.
This SAE Recommended Practice establishes uniform test procedures for friction based parking brake components used in conjunction with hydraulic service braked vehicles with a gross vehicle weight rating greater than 4500 kg (10 000 lb). The components covered in this document are the primary actuation and the foundation park brake. Various peripheral devices such as application dashboard switches or indicators are not included. These test procedures include the following: a Brake Related Tests 1 Brake Functional Performance 2 Brake Dynamic Torque Performance 3 Brake Corrosion Resistance 4 Brake Endurance with Torque 5 Brake Endurance without Torque 6 Vibration Resistance 7 Brake Ultimate Static Load 8 Brake Lining Wear Adjuster Function b Actuation Related Tests 1 Mechanical Actuator Functional Performance 2 Mechanical Actuator Endurance 3 Mechanical Actuator Quick Release 4 Mechanical Actuator Ultimate Load 5 Spring Apply Actuator Functional Performance 6 Spring Apply Actuator
This specification covers a corrosion and heat resistant vacuum melted nickel alloy in the form of investment castings.
This specification covers two grades of a premium aircraft-quality, corrosion-resistant steel in the form of bars, wire, forgings in the solution heat treated condition, and forging stock. Product covered by this specification is limited to a nominal 6.00 inches (152.4 millimeters) and under diameter or maximum cross-sectional dimension between parallel sides (thickness), unless the product is tested in the response to H1000 condition (see 3.5.1.2 and 8.7). When product is tested in the H1000 condition, the product is limited to 8.00 inches (203.2 millimeters) and under diameter or maximum cross-sectional dimension between parallel sides (thickness). Stock for forging may be of any size.
This specification covers a premium aircraft-quality, corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash-welded rings up to 8.0 inches (203 mm) in diameter or least distance between parallel sides in the solution heat-treated condition (see 8.4), and stock of any size for forging, flash-welded rings, or heading.
This specification covers a corrosion and heat resistant nickel alloy in the form of welding wire.
This specification covers a corrosion- and heat-resistant steel in the form of wire.
This specification covers a corrosion-resistant steel in the form of investment castings.
This specification covers two types of corrosion- and heat-resistant steel in the form of bars, wire, forgings, and forging stock.
This specification covers a corrosion and heat resistant steel in the form of covered welding electrodes.
This specification covers a premium aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing.
This specification covers a low-alloy steel in the form of wire supplied as coils or straight lengths.
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers a premium aircraft-quality, low-alloy steel in the form of sheet strip, and plate.
This SAE Aerospace Recommended Practice (ARP) covers the requirements for the types of glass to be utilized in the fabrication of cover glasses and lighting wedges used in aerospace instruments. It defines the maximum extent of physical defects and recommends standard methods of inspection and evaluation. Definitions of terminology used in this document are covered in 2.2.
This specification covers a high-expansion steel in the form of bars, forgings, and forging stock.
This specification and its supplementary detail specification cover various types of non-woven glass cloth in the form of tape and flat sheet impregnated with epoxy resin, the resin to be supplied in a “B” staged condition.
This aerospace recommended practice is applicable to the design of a reusable locking device for cylindrical nuts which are generally tightened with a spanner wrench. Nuts of this type are commonly used to pre-load, and/or position, anti-friction bearings.
This specification covers a premium aircraft-quality, electroslag remelted, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
This specification covers a corrosion- and heat-resistant iron alloy in the form of investment castings.
This SAE Aerospace Recommended Practice (ARP) defines and establishes a standard presentation of data for gas turbine propulsion engine starter characteristics in graphs and curves. The data presentation applies to both pneumatic and hydraulic energy source starting systems.
This test method describes a procedure for measuring the largest pore or hole in a filter or similar fluid-permeable porous structure. A standard referee test method for precise determination or resolution of disputes is specified. A simpler inspection test procedure for quality assurance “go-no-go” measurement is also given. Bubble-point testing physics, analysis of bubble-point test data, and correlation with other methods of pore size determination are separately discussed in the appendix.
This specification and its supplementary detail specifications cover interleaf carrier materials in the form of polyethylene film or coated paper tape or sheeting.
This specification covers an aluminum alloy in the form of sheet and plate from 0.006 to 3.000 inches (0.15 to 76.20 mm), inclusive, in nominal thickness (see 8.5).
This Aerospace Recommended Practice outlines the design, installation, testing and field maintenance criteria for aerospace vehicle cryogenic duct systems. These recommendations are considered currently applicable guides and are subject to revision due to the continuing development within industry.
This SAE Aerospace Recommended Practice (ARP) is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances.
This specification covers a corrosion- and heat-resistant steel in the form of sheet, strip, and plate.
This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing.
This document recommends standard gland design criteria and dimensions for dynamic radial O-ring seal applications specifically for engine and engine control systems operating at pressures up to a maximum of 1500 psi (10342.14 kPa) and provides recommendations for modifying these glands in special applications. There are no provisions in this document for anti-extrusion devices. NOTE: The criteria set forth here are similar to but not identical with those in MIL-G-5514 and AS4716. This document is not intended to replace MIL-G-5514 or AS4716 for hydraulic applications.
This document recommends general gland design criteria for static and dynamic O-ring seal applications specifically for engines and engine control systems.
This recommended practice covers an instrument which measures and displays angle of deviation of the airstream dependent on mounting location on the aircraft.
This document is intended for the application of color to cathode-ray-tube (CRT) displays, liquid crystal displays (LCD) and other types of display technologies such as projection displays. Emerging color display technologies other than those noted above, may not be adequately covered by these recommendations. Color recommendations will not address Night Vision Devices (NVD), Head-Up Displays (HUD) or Head or Helmet Mounted Displays (HMD). This document is applicable to aircraft as understood in 14 CFR Parts 23, Part 25, Part 27 and Part 29, and EASA CS-23, CS-25. CS-27 and CS-29 certification standards.
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, flash-welded rings, and stock for forging or flash-welded rings.
Items per page:
50
1 – 50 of 219531