Results

Items (216,100)

Missile Hydraulic Pumps and Their Power Sources

This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.

A-6C4 Power Sources Committee

Engine Rotation and Cylinder Numbering

J824_202206 (Current)

6/29/2022

This SAE Standard was developed to provide a method for indicating the direction of engine rotation and numbering of engine cylinders. The document is intended for use in designing new engines to eliminate the differences which presently exist in industry.

Engine Power Test Code Committee

Copper-Zinc Alloy, Laminated Sheet, 70Cu - 30Zn, Surface Bonded

AMS4508K (Current)

3/25/2026

This specification covers a copper-zinc alloy (brass) in the form of laminated sheet with nominal thickness 0.006 to 0.125 inch (0.15 to 3.18 mm) (see 8.5).

AMS D Nonferrous Alloys Committee

Safety and Cybersecurity Recommendations for the Use of the Rust Language in Critical Systems

JA1020_202603 (Current)

3/26/2026

This document provides guidance to using Rust in critical and safety-related software. The document summarizes how the usage of Rust supports in arguing safety according to ISO 26262 or RTCA DO-178C combined with RTCA DO-332. Cybersecurity best practices are referenced as these requirements largely overlap with those implemented for safety. As the Rust language is still evolving, this document targets the 2021 and 2024 editions of the language. Older or newer editions might require additional or changed rules and guidelines. Generally, the newest available edition of the language should be selected as newer editions remove ambiguities and outdated parts from the language.

Functional Safety Committee

FITTINGS, INSTALLATION OF FLARELESS TUBE, STRAIGHT-THREADED CONNECTORS

AS33566A (Current)

3/30/2026

G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies

Vehicle Electromagnetic Immunity - Bulk Current Injection

J551/13_200908 (Current)8/18/2009

This part of SAE J551 specifies Bulk Current Injection (BCI) test methods and procedures for testing the electromagnetic immunity of electronic components for passenger cars and commercial vehicles. The electromagnetic disturbance, considered in this part of SAE J551, will be limited to continuous narrow band electromagnetic fields. SAE J551-1 specifies general, definitions, practical use, and basic principles of the test procedure.

Electromagnetic Compatibility (EMC) Standards

Electromagnetic Compatibility Measurement Procedure for Vehicle Components—Part 22—Immunity to Radiated Magnetic Fields

J1113/22_201008 (Current)8/11/2010

This SAE Standard specifies the test methods and procedures for vehicle components to determine the components immunity to radiated magnetic fields.

Electromagnetic Compatibility (EMC) Standards

Immunity to Radiated Electromagnetic Fields; 10 kHz to 200 MHz - Crawford TEM Cell and 10 kHz to 5 GHz - Wideband TEM Cell

J1113/24_201008 (Current)8/6/2010

This part of SAE J1113 specifies TEM cell test methods and procedures for testing the electromagnetic immunity of electronic components (DUTs) for passenger cars, commercial vehicles and similar applications. Methods using the constant cross-section TEM cell (Crawford TEM) and the flared cross-section TEM cell (wideband TEM) are discussed in the document. The electromagnetic disturbance considered in this part of SAE J1113 will be limited to continuous narrowband electromagnetic fields. TEM cells produce both electric and magnetic fields simultaneously. The test is directly applicable to DUTs whose height is less than 1/3 the septum height; somewhat larger modules can be tested with conditions applied. The Crawford TEM and wideband TEM cell may be used for testing within the 1/3 height condition without demonstrating field uniformity within the cell, if the test set-up complies with the other provisions of this standard. This test can be used for two purposes: a. Testing the immunity

Electromagnetic Compatibility (EMC) Standards

Chemical Compositions of SAE Alloy Steels

J404_200901 (Current)

1/27/2009

In 1941, the SAE Iron and Steel Division in collaboration with the American Iron and Steel Institute (AISI) made a major change in the method of expressing composition ranges for the SAE steels. The plan, as now applied, is based in general on narrower ladle analysis ranges plus certain product (check) analysis allowances on individual samples, in place of the fixed ranges and limits without tolerances formerly provided for carbon and other elements in SAE steels (reference SAE J408). ISTC Division 1 has developed a procedure which allows for the maintenance of the grade list in this SAE Standard. This will involve conducting an industry-wide survey to solicit input. This survey will be conducted at a frequency deemed necessary by the technical committee. Criteria have been established for the addition to or deletion of grades from the grade table. A new grade will be considered if it meets standard SAE grade ranges, has a minimum usage or production of 225 tonnes/year (250 tons/year

Metals Technical Committee

Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 5/8 Inch (15.9 mm), 0.25 Ounces per Yard (7.75 g/m)

AMS3793/12A (Current)

9/11/2013

This specification covers one class of para-aramid tape and webbing of a single width and with varying weights.

AMS P Polymeric Materials Committee

Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E180 (Type B0.102-E82)

AMS3867/4B (Current)

10/12/2016

This specification covers one type of epoxy-resin-impregnated boron filaments 0.0040 inch (0.102 mm) in diameter in the form of continuous tape supported on a glass cloth carrier.

AMS P17 Polymer Matrix Composites Committee

Steel, Sheet and Strip 0.08 - 0.13C, Aluminum Killed (SAE 1010) Deep Forming Grade

AMS5047G (Current)

2/15/2017

This specification covers an aluminum-killed carbon steel in the form of sheet and strip.

AMS E Carbon and Low Alloy Steels Committee

Cobalt Alloy, High Temperature Brazing Filler Metal 50Co - 8.0Si - 19Cr - 17Ni - 4.0W - 0.80B 2050 to 2100 °F (1121 to 1149 °C) Solidus-Liquidus Range

AMS4783H (Current)

7/7/2021

This specification covers a cobalt alloy in the form of wire, rod, strip, foil, and powder and a viscous mixture (paste) of the powder in a suitable binder.

AMS F Corrosion and Heat Resistant Alloys Committee

SAE Technical Standards Board Rules and Regulations

TSB001_201411 (Current)11/14/2014

Executive Standards Committee

Copper Wire, Oxygen-Free 99.95(Cu+Ag) Annealed

AMS4701H (Current)

8/8/2015

This specification covers one type of copper in the form of wire.

AMS D Nonferrous Alloys Committee

Type 16 15% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions

AMS3678/16A (Current)

2/29/2016

This specification covers a polytetrafluoroethylene (PTFE) resin filled with 15% polyimide in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.

AMS P Polymeric Materials Committee

Trace Element Control Nickel Alloy, Cobalt Alloy, and Iron Alloy Wrought Products for High-Temperature, High-Stressed Applications

AMS2281B (Current)

1/17/2013

This specification establishes maximum permissible limits for elements not normally specified but which may occur in trace amounts in wrought nickel, cobalt, and iron alloy products.

AMS F Corrosion and Heat Resistant Alloys Committee

Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90000 (621) Tensile, 40000000 (276) Modulus, 175 (347)

AMS3894/14B (Current)

9/13/2016

This specification covers one type of epoxy-resin-impregnated carbon fibers in the form of tape and sheet.

AMS P17 Polymer Matrix Composites Committee

Tolerances Copper and Copper Alloy Wire

AMS2224H (Current)

6/13/2023

This specification covers established inch/pound manufacturing tolerances applicable to copper and copper alloy wire ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted.

AMS D Nonferrous Alloys Committee

IVHM Design Guidelines

ARP6407 (Current)

7/29/2019

This Aerospace Recommended Practice (ARP) provides guidance for the design of an integrated vehicle health management (IVHM) capability that will extend the vehicle’s inherent design to enable health management of the platform and its components. This guidance is technology-independent; the principles are generally applicable to the majority of potential IVHM design scenarios, including “clean sheet” system design, where IVHM is considered as a primary design consideration, and the retrofit design, where existing systems are modified and leveraged with the IVHM capability. In either case, this ARP provides guidance for designing the IVHM capability from the feasibility assessment to the conceptual design analysis and to the development design phases, with considerations given to trade studies, metrics, and life cycle impacts.

HM-1 Integrated Vehicle Health Management Committee

Cyber-Physical Systems Security Engineering Plan (CPSSEP)

JA7496_202206 (Current)

6/2/2022

This SAE Standard establishes practices to: a Manage risk and ensure security of a cyber-physical system (CPS) throughout its life cycle by utilizing systems engineering principles; b Assess the impact of cyber-physical systems security (CPSS) objectives and requirements; c Assess the security risks to CPS technical effectiveness and functions, and address weaknesses and vulnerabilities; d Address various domains of consideration (see 3.1) that take into account operating conditions of the system, command and control, configuration management (refer to SAE EIA649), etc., that could negatively impact CPSS or CPS-designed purpose; e Perform design validation and verification to assess security and risk of the CPS.

G-32 Cyber Physical Systems Security Committee

TAPE, NYLON, NONMELTING, REINFORCING 2 (50) Wide, 2000 (8895 N) Breaking Strength

AMS3777/8 (Current)

10/1/1995

This specification covers one width and strength of nylon tape.

AMS P Polymeric Materials Committee

Yarn, Organic Fiber (Para-Aramid), High Modulus 1420 Denier (1580 d tex), 0.6% Finish

AMS3901/4D (Current)

7/30/2014

AMS P17 Polymer Matrix Composites Committee

Plating, Brush, Zinc-Nickel Low Hydrogen Embrittlement

AMS2451/9C (Current)

5/24/2023

This specification covers the requirements for brush plating of zinc-nickel by electrodeposition.

AMS B Finishes Processes and Fluids Committee

Aluminum Sheet, Laminated Edge Bonded

AMS4012G (Current)

7/28/2014

This specification covers an aluminum or aluminum alloy in the form of sheet, laminated and edge bonded.

AMS D Nonferrous Alloys Committee

Cloth, Parachute, Meta-Aramid, Low Modulus 6.5 (220) Weight, Special Weave

AMS3801/2C (Current)10/11/2016

This specification covers one weight and one weave of low-modulus meta-aramid cloth.

AMS P Polymeric Materials Committee

Yarn, Organic Fiber (Para-Aramid), High Modulus 720 Denier, (800 d tex), 1.2% Finish

AMS3901/17B (Current)

7/31/2014

This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.

AMS P17 Polymer Matrix Composites Committee

Identification Castings

AMS2804D (Current)

10/12/2017

This specification covers the requirements for identification of castings.

AMS B Finishes Processes and Fluids Committee

Immunity to Conducted Transients on Power Leads

J1113/11_202303 (Current)

3/20/2023

This SAE Standard defines methods and apparatus to evaluate electronic devices for immunity to potential interference from conducted transients along battery feed or switched ignition inputs. Test apparatus specifications outlined in this procedure were developed for components installed in vehicles with 12-V systems (passenger cars and light trucks, 12-V heavy-duty trucks, and vehicles with 24-V systems). Presently, it is not intended for use on other input/output (I/O) lines of the device under test (DUT).

Electromagnetic Compatibility (EMC) Standards

Performance Levels and Methods of Measurement of Electromagnetic Radiation From Vehicles and Devices, Narrowband, 10 Khz to 1000 Mhz

J1816_198710 (Current)10/1/1987

With the advent of computer based electronics being utilized in automobiles, the Electromagnetic Radiation Subcommittee has deemed it prudent that a new test method be written to provide a common test for the measurement of narrowband radiation from vehicles and devices. This SAE Standard covers methods of measuring incidental narrowband radiation from vehicles and devices. The standard also establishes performance levels intended to protect nearby communication and broadcast receivers. It is intended to serve as an alternate method of measuring electromagnetic radiation which is analogous to the FCC Part 15 methodology but adapted to measuring vehicles. The equivalent procedures for broadband emissions are set forth in SAE J551. This standard covers narrowband emissions in the frequency range of 10 kHz to 1000 MHz. An example of such radiation is the unintended emission from on-board logic and computer modules. In particular, the standard is intended to provide protection to adjacent

Electromagnetic Compatibility (EMC) Standards

Stepping Surface Test Method for Heavy Vehicles

J3351_202602 (Current)

2/12/2026

Define the test equipment and test procedures for measuring slip resistance for stepping, walking, and standing surfaces commonly used on heavy vehicles.

Truck and Bus Human Factors Committee

Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes

JA1011_202411 (Current)

11/6/2024

This SAE Standard for reliability-centered maintenance (RCM) is intended for use by any organization that has or makes use of physical assets or systems that it wishes to manage responsibly.

G-11M, Maintainability, Supportability and Logistics

Case Hardening of Titanium and Titanium Alloys

AMS2775C (Current)

10/22/2015

This specification covers the engineering requirements for producing a carbon-oxygen-nitrogen-bearing case on titanium and titanium alloys by means of a molten salt bath, and the properties of the case.

AMS B Finishes Processes and Fluids Committee

Steel, Bars 0.90 - 1.03C

AMS5132M (Current)

1/28/2022

This specification covers a high-carbon steel in the form of bars.

AMS E Carbon and Low Alloy Steels Committee

Gold Wire and Ribbon 99.97Au Annealed

AMS7731D (Current)

3/14/2018

This specification covers pure gold in the form of wire 0.005 to 0.040 inch (0.012 to 1.000 mm) inclusive, in nominal diameter, and ribbon 0.002 to 0.051 inch (0.05 to 1.28 mm) inclusive, in nominal thickness (see 8.5).

AMS D Nonferrous Alloys Committee

Roving, Organic Fiber (Para-Aramid) Intermediate Modulus 15000 Denier (16700 Dtex), 7.0% Finish

AMS3904/10B (Current)

8/1/2016

This specification covers one type of organic (para-aramid) fiber in the form of roving. The product shall be formed as a number of ends, tows, or strands collected into a parallel bundle with little or no twist.

AMS P17 Polymer Matrix Composites Committee

Thread, Para-Aramid Intermediate Modulus 500 yards per pound (1008 m/kg), 225 pounds force (1001 N) Breaking Strength

AMS3787/8C (Current)

6/30/2016

This specification covers one weight and strength of para-aramid thread.

AMS P Polymeric Materials Committee

Sponge, Chloroprene (CR) Rubber, Soft

AMS3197N (Current)

3/1/2022

This specification covers a chloroprene (CR) rubber sponge in the form of sheet, strip, molded shapes, or other forms, as ordered.

AMS CE Elastomers Committee

Brass Forgings, Free Cutting 60Cu - 2.0Pb - 37.5Zn As Forged (M10)

AMS4614J (Current)

9/30/2022

This specification covers one type of brass in the form of forgings and forging stock.

AMS D Nonferrous Alloys Committee

Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions

AMS3678/4B (Current)

2/29/2016

This specification covers a polytetrafluoroethylene (PTFE) resin filled with 25% glass fiber in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.

AMS P Polymeric Materials Committee

Test Cell Mass Fuel Flow Measurement Using Coriolis Flow Meters

AIR6202 (Current)

6/14/2017

The scope of this information report applies to the steady state measurement of direct mass fuel flow in gas turbine engine test cells. A measurement accuracy, and hence uncertainty of between ±0.1 to ±0.2% of value is believed to be achievable for liquid flow applications with some meter models/installations. Whilst capable of general transient measurement in 50 to 100 Hz region, this type of fuel meter is not capable of rapid transient measurement (in 100 to 250 Hz region). It is also not currently considered suitable for "in flight" fuel flow measurement.

EG-1E Gas Turbine Test Facilities and Equipment

Integrated Project Processes for Engineering a System

SAE1001 (Current)

10/9/2018

This standard is applicable to the engineering or the reengineering of: a Commercial or non-commercial systems, or portions thereof; b Any system, small or large, simple or complex, software-intensive or not, precedented or unprecedented; c Systems made up of hardware, software, firmware, personnel, facilities, data, materials, services, techniques, or processes (or combinations thereof); d A new system or a legacy system, or portions thereof. The requirements of this standard, or a designated subset, are intended to be applied by projects establishing policies and procedures for project implementation of the adopted process and process elements of this standard. The requirements of this standard may be tailored as follows: a Processes – Processes may be tailored to be applicable for a given type of project or system. For example, the System Utilization Processes typically don’t apply for conceptual or prototype systems in the same manner as for full-volume production systems. b

G-47 Systems Engineering

Aerospace Series - Quality Management Systems Statistical Product Acceptance Requirements

AS9138 (Current)

1/20/2018

This standard establishes requirements when implementing statistical product acceptance methods to meet defined risk requirements. This standard also establishes the minimum content required to be covered in an organization’s documented procedures that govern their application of statistical product acceptance methods. These general requirements and documented procedures apply the requirements of the 9100/9110/9120 quality management system standards, in addition to establishing requirements for retrievability, safety/critical characteristics, and quality parameters that protect the customer.

G-14 Americas Aerospace Quality Standards Committee (AAQSC)

Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 1000 Denier (1110 Dtex), 1.0% Finish

AMS3904/3C (Current)

8/1/2016

This specification covers one type of organic (para-aramid) fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.

AMS P17 Polymer Matrix Composites Committee

Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 85 Durometer “A”

AMS3571/5C (Current)

9/23/2011

This specification covers one type of polyether-type urethane (EU) resin and hardener which, when mixed and cured, produce elastomeric polyurethane products.

AMS P Polymeric Materials Committee

Tolerances Carbon and Alloy Steel Tubing

AMS2253F (Current)

2/24/2018

This specification covers established inch/pound manufacturing tolerances applicable to carbon and alloy tubing ordered to inch/pound dimensions. These tolerances apply to all conditions unless otherwise noted. The term “excl” is used to apply only to the higher figure of the specified range.

AMS E Carbon and Low Alloy Steels Committee