Results

Items (213,158)

Aluminum Alloy Castings, Permanent Mold, 5.0Si - 1.2Cu - 0.50Mg (355.0-T6), Solution and Precipitation Heat Treated

AMS4281H (Current)

09/12/2025

This specification covers an aluminum alloy in the form of permanent mold castings (see 8.6).

AMS D Nonferrous Alloys Committee

Aluminum Alloy, Castings, 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6), Solution and Precipitation Heat Treated

AMS4215K (Current)

09/12/2025

This specification covers an aluminum alloy in the form of sand, permanent mold, composite mold, and investment castings (see 8.6).

AMS D Nonferrous Alloys Committee

Vehicle, Magnetic Particle Inspection Petroleum Base

AMS2641D (Current)

09/12/2025

This specification covers two types of refined hydrocarbon compounds in the form of liquids. This specification only covers newly manufactured materials.

AMS K Non Destructive Methods and Processes Committee

Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings, 53.3Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V (CW-12MW), As-Cast

AMS5388L (Current)

09/12/2025

This specification covers a corrosion- and heat-resistant nickel alloy in the form of investment castings.

AMS F Corrosion and Heat Resistant Alloys Committee

Hardware Protected Security Environment - GlobalPlatform Technologies Information Report

J3101-5_202509 (Current)

09/12/2025

The scope of the analysis is on the GlobalPlatform Secure Element (SE) and Trusted Execution Environment (TEE) standard specifications correspondence to SAE J3101 recommended practices. This analysis includes focuses on the platform specifications but not the scope of any future security application/applets. Both of these GlobalPlatform specifications have associated protection profiles to validate compliance, although GlobalPlatform does not currently have any specific SAE J3101 protection profiles. GlobalPlatform has communicated that it is assessing whether or not to develop application-level protection profiles to more explicitly cover the remaining requirements of SAE J3101 in order to allow for standardized testing and certification of complete solutions.

Vehicle Electrical System Security Committee

AIRCRAFT FIRE PROTECTION FOR RECIPROCATING AND GAS TURBINE ENGINE INSTALLATIONS

AIR1076 (Current)

09/11/2025

This document is reissued for application to helicopters.

S-12 Powered Lift Propulsion Committee

Appendix A Electronic Display Symbology for EADI/PFD

ARP4102/7_APXA (Current)07/10/2007

S-7 Flight Deck Handling Qualities Stds for Trans Aircraft

NICKEL ALLOY, CORROSION AND HEAT RESISTANT, POWDER 55Ni - 15Cr - 17Co - 5.0Mo - 3.5Ti - 4.0Al - 0.025B As Fabricated

AMS5851C (Current)04/01/1994

AMS F Corrosion and Heat Resistant Alloys Committee

STEEL COTTER PINS, GALVANIZED Low Carbon

AMS7212 (Current)

12/01/1942

AMS F Corrosion and Heat Resistant Alloys Committee

Steel Tubing (Seamless) Round 0.55ni 0.5cr 0.2mo (0.27 - 0.33c) Heat Treated (125,000 Tensile Strength)

AMS6531 (Current)12/16/2002

AMS E Carbon and Low Alloy Steels Committee

Steel Bars, Forgings, And Tubing, 1.2cr 3.25ni 0.12mo(0.07 0.13c), Vacuum Consumable Electrode Remel

AMS6262A (Current)05/01/1944

AMS E Carbon and Low Alloy Steels Committee

Steel Tubing (Seamless for Machined Parts) 1.8ni 0.80cr 0.25mo (0.38 - 0.43c) Heat Treated (200,000 Tensile Strength)

AMS6420 (Current)12/16/2002

AMS E Carbon and Low Alloy Steels Committee

Labels, Aluminum Foil Etched and Enameled

AMS7294A (Current)01/01/1987

This specification has been 'Cancelled' by the Aerospace Materials Division, SAE, as of September 1996.

AMS D Nonferrous Alloys Committee

BOLTS AND SCREWS, WORK-STRENGTHENED ALLOY, CORROSION RESISTANT Forged Head, Roll Threaded After Aging

AMS7468 (Current)

05/01/1995

This specification covers aircraft-quality bolts and screws having UNJ (MIL-S-8879) thread form, made from a corrosion-resistant, work-strengthened cobalt-chromium-nickel alloy and aged to develop the specified properties.

AMS F Corrosion and Heat Resistant Alloys Committee

Cast Aluminum Alloy, Pressure Molded (Aluminum Silicon)

AMS4292 (Current)12/16/2002

AMS D Nonferrous Alloys Committee

Magnesium Alloy Castings, Sand 6ce Solution and Precipitation Treated

AMS4428 (Current)12/16/2002

AMS D Nonferrous Alloys Committee

Titanium Alloy, 5cr 3al

AMS4927 (Current)12/16/2002

AMS G Titanium and Refractory Metals Committee

Alloy Castings, Precision Investment, Corrosion and Heat Resistant Cobalt Base 27cr 2.8ni 5.5mo

AMS5386A (Current)12/16/2002

AMS F Corrosion and Heat Resistant Alloys Committee

Precision Sleeve, Coupling Flareless

ARP1042 (Current)12/16/2002

G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies

Introduction to Pressure Suite Assemblies

AIR1103 (Current)09/01/1980

AC-9 Aircraft Environmental Systems Committee

PUMPS, HYDRAULIC, POWER DRIVEN, VARIABLE DELIVERY COMPOSITE OUTLINE DRAWINGS

AIR45 (Current)

09/30/2000

Outline drawings from all known pump manufacturers for the various size pumps listed in MIL-P-7740 were requested and those received have been combined to make up the various outline drawings. There has been prepared a composite outline drawing enclosing all of the individual outline drawings. Since the pump manufacturers' drawings will change over a period of time and complete detail is not shown, it is not possible to make a detailed mockup of any specific pump. These drawings are intended to provide information concerning the general space requirement for variable delivery pumps, and could be used to manufacture a composite mockup to indicate roughly the space required on a new engine design.

A-6C4 Power Sources Committee

Steel Bars, Forgings, Tubing, and Rings, Corrosion and Heat Resistant 15Cr 26Ni 1.3Mo 2.1Ti 0.30V 1800°F (982°C) Solution Heat Treated

AMS5736G (Current)01/01/1974

AMS F Corrosion and Heat Resistant Alloys Committee

SEALING COMPOUND, LOW ADHESION, CORROSION INHIBITING 9,000 to 14,000 Poises (900 to 1400 Pas 1/2 Hour Application Time (B-1/2)

AMS3267/2A (Current)04/01/1992

This specification covers accelerated curing synthetic rubber compounds with corrosion inhibitors and low adhesive strength supplied as a two-component system.

AMS G9 Aerospace Sealing Committee

Starting System Installation, Description and Guide

AIR912 (Current)12/16/2002

AE-6 Starting Systems and Auxiliary Power Committee

Turn Signal Flashers

J590_199907 (Current)07/15/1999

This SAE Standard defines the test conditions, procedures, and minimum design requirements for nominal 6, 12, and 24 V turn signal flashers. Document cancelled in 1999. Information now contained in J1690

Circuit Protection and Switch Device Committee

Component Nomenclature--Scrapers

J728_200006 (Current)06/28/2000

This SAE Standard provides names of major components peculiar to the scraper portion of tractor-scrapers. Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.

MTC1, Earthmoving Machinery

Small Spark Ignition Engine Test Code

J607_198808 (Current)08/25/1988

The purpose of this code is to prove a uniform means of comparing small gasoline engines of 0.82 L (50 in3) or less in displacement and 15.1 kW (20 hp) or less in power output. It is not intended as a laboratory manual. Governor characteristics are considered part of the end item specification. Replaced with J1349

Small Engine and Powered Equipment Committee

Component Nomenclature--Dumper Trailer

J734_200006 (Current)06/28/2000

This SAE Standard provides names of major components peculiar to the trailer portion of certain configurations of dumpers as defined in SAE J1057 (See Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine.

MTC1, Earthmoving Machinery

Ignition-Cable, High Tension Copper Conductor, Low Capacitance

AMS3397 (Current)12/16/2002

AMS P Polymeric Materials Committee

SYNTHETIC RUBBER Buna S Type (35-45)

AMS3245 (Current)

05/01/1954

AMS CE Elastomers Committee

GASKET, OIL RESISTING

AMS3230 (Current)

12/16/2002

AMS CE Elastomers Committee

Synthetic Rubber Buna S Type (45-65)

AMS3247 (Current)05/01/1954

AMS CE Elastomers Committee

Silicone Resin, Elastomeric, Opaque, Elevated Temperature Cure

AMS3369A (Current)06/01/1996

This specification has been "CANCELLED" by the Aerospace Materials Division, SAE, as of June, 1996.

AMS CE Elastomers Committee

SYNTHETIC RUBBER Hot Oil Resistant - High Swell (55-65)

AMS3223B (Current)

12/16/2002

AMS CE Elastomers Committee

Synthetic Rubber Rapid Fuel Swelling (45-55)

AMS3221B (Current)12/16/2002

AMS CE Elastomers Committee

Compound, Zinc Chromate, Sealing (Thinned) Hot Oil Resisting

AMS3113 (Current)10/01/1945

AMS P Polymeric Materials Committee

Nitrogen, Liquid, Propellant Grade

AMS3015A (Current)09/01/1996

This specification has been 'CANCELLED' by the Aerospace Materials Division, SAE, as of September 1996.

AMS B Finishes Processes and Fluids Committee

Slow-Moving Vehicle Identification Emblem

J943_200006 (Current)06/28/2000

This SAE Standard establishes emblem dimensional specifications, performance requirements, related test procedures, and mounting requirements. This unique idenification emblem shall be used only on machines which are designed for and travel at rates of speed less than 40 km/h (25 mph). The identifcation emblem shall supplement but not replace warning devices such as tail lamp regulators or flashing lights and shall not be used to identify stationary objects or stopped vehicles and/or machines. The dimensions and color patterns of the emblem have been established as a unique identification and shall not be altered to permit advertising or other markings on the face of the emblem, except as permitted in 4.2

Agricultural Tractor Standards Committee (ATSC)

Component Nomenclature--Construction Two- and Four-Wheel Tractors

J869_200006 (Current)06/28/2000

This SAE Standard provides names of major components peculiar to tractors used with scrapers and dumpers. (See Figures 1 to 3.) Reference SAE J1057. Illustrations of components are not intended to be exactly descriptive of any particular machine.

MTC1, Earthmoving Machinery

Five Conductor Electrical Connectors for Automotive Type Trailers

J895_199901 (Current)01/26/1999

Electrical Distribution Steering Committee

Formed Tube Ends for Hose Connections

J962_199703 (Current)03/01/1997

This SAE Standard covers the dimensional and general specifications applicable to those formed tube end configurations suitable for hose connections made with or without hose clamps (see SAE J536) in relatively low pressure applications.

Hydraulic Tube Fittings Committee

Connectors and Plugs

J856_199901 (Current)01/29/1999

See Figures 1 through 11.

Road Illumination Devices Standards Committee

TOLERANCES, METRIC Aluminum Alloy Drawn Tubing

MAM2203 (Current)

07/23/2002

This specification covers established metric manufacturing tolerances applicable to aluminum alloy drawn tubing ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" applies only to the higher figure of the specified range.

AMS D Nonferrous Alloys Committee

HI-HEAD FINISHED HEX BOLTS

J871_196906 (Current)

06/01/1969

Included herein are the detailed general and dimensional specifications applicable to hi-head finished hex bolts. All general specifications and dimensions not shown shall conform to those applicable to finished hex bolts in Table 4 of SAE J104. Hi-head finished hex bolts arc primarily intended for use in the heavy construction and industrial equipment industry. The increase in head height over that of the finished hex bolt assures good wrenchability where frequent servicing is necessary, where high torquing is a requirement, or where wear on the bolt head is a problem.

Fasteners Committee