Results
This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.
This specification covers an aluminum alloy in the form of rolled or forged rings up to 6 inches (152 mm), inclusive, in thickness (see 3.3.1.1.1) and an OD to wall thickness ratio of 10 or greater (see 8.5).
This specification covers a nitriding grade of premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock. AMS6496 and AMS6497 cover UNS K23280 with other quality levels.
This specification covers a magnesium alloy in the form of investment castings (see 8.6).
This specification covers a copper-zinc alloy (brass) in the form of sheet, strip, and plate (see 8.6).
This specification covers an aluminum alloy in the form of sheet from 0.063 to 0.249 inch (1.60 to 6.30 mm) in nominal thickness (see 8.6).
This SAE Recommend Practice establishes for passenger cars, light trucks, and multipurpose vehicles with GVW of 4500 kg (10000 pounds) or less, as defined by the EPA, and M1 category vehicles, as defined by the European Commission:
This specification covers a low-alloy steel in the form of sheet, strip, and plate 4.00 inches (101.6 mm) and under in thickness.
This SAE Aerospace Recommended Practice (ARP) provides the user with standardized guidelines for the measurement of effective intensity of short pulse width strobe anticollision lights for aircraft in the laboratory, in maintenance facilities, and in the field. A common source of traceability for calibration of the measurement systems, compensation for known causes of variation in light output such as the use of colored lenses, and recommendations which minimize sources of errors and uncertainties are included in this document. Estimates of uncertainty and error sources for each class of measurement are discussed.
This specification covers a magnesium alloy in the form of investment castings (see 8.6).
This procedure describes a method of measuring the resistance to wet color transfer of materials such as textiles, leather, and composites.
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
This specification covers one type of polyether-type urethane (EU) resin and hardener which, when mixed and cured, produce elastomeric polyurethane products.
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
This specification covers one type of organic fiber in the form of roving. The product shall be formed as four ends of 1140 denier (1270 d tex) yarn (AMS3901/3) collected into an approximately parallel arrangement without twist.
This specifications covers thirteen classes of para-aramid tape and webbing of a single width and with varying weights.
This specification covers one type of organic (para-aramid) fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.
This specification covers thermal radiation resistant material in the form of tape with pressure-sensitive adhesive.
This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.
This specification covers the requirements for an aluminum brazing flux in granular form.
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
This specification covers one class of para-aramid tape and webbing of a single width and with varying weights.
This specification covers methyl alcohol in the form of a liquid.
This specification covers an unfilled, room-temperature-polymerizing epoxy resin formulation with a polyamide hardener, supplied as a two-component system.
This specification covers one type of epoxy-resin-impregnated carbon fibers in the form of tape and sheet.
This specification covers one type of nylon in the form of webbing.
This specification covers one type of organic fiber in the form of roving. The product shall be formed as three ends of 2840 (3160 d tex) denier yarn (AMS3901/14) collected into an approximately parallel arrangement without twist.
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
This specification covers the specific requirements for seamless tube drawn from aluminum alloy 6061.
This specification covers three classes of para-aramid tape and webbing of a single width and with varying weights.
This specification covers one type of epoxy-resin-impregnated carbon fibers in the form of tape and sheet.
This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.
This SAE Recommended Practice pertains to electrical systems of motorcycles both with and without batteries.
This specification covers one width and strength of nylon tape.
This specification covers three classes of para-aramid tape and webbing of a single width and with varying weights.
This specification covers a rigid cellular polyurethane or polyisocyanurate (polyether only) foam in the form of board or block.
This specification covers a polytetrafluoroethylene (PTFE) resin filled with 10% polyimide in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
This specification covers a low-carbon steel in the form of round wire clad with phosphorus-deoxidized copper.
This specification covers a standard chloroprene (CR) rubber stock in the form of molded test slabs.
This specification covers one class of para-aramid tape and webbing of a single width and with varying weights.
Items per page:
50
1 – 50 of 216072