Results
This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.
This SAE J2971 Recommended Practice describes a standard naming convention of aerodynamic devices and technologies used to control aerodynamic forces on trucks and buses weighing more than 10000 pounds (including trailers).
This document is written to address acceleration and deceleration control issues related to heavy-duty trucks and buses greater than 10000 GVW.
This specification covers an aluminum alloy in the form of sheet 0.125 to 0.249 inch (3.18 to 6.32 mm), inclusive, in nominal thickness (see 8.6).
This specification covers an aluminum alloy in the form of welding wire.
This specification covers an aluminum alloy in the form of rolled or cold-finished bars, rods, and wire and of flash-welded rings and stock for flash-welded rings.
This SAE Standard covers a single Un-Jacketed (UTP) and Jacketed (J-UTP) Balanced Unshielded Twisted Pair data cable intended for use in surface vehicle cables for 10 Mb/s Ethernet shared bus applications. The tests in this document are intended to qualify cables for normal operation in an automotive environment while maintaining the necessary electrical properties for reliable data transmission.
This specification covers a leaded bronze in the form of sand and centrifugal castings (see 8.6).
This SAE Recommended Practice has been adopted by SAE to specify: a. A standard procedure for chassis dynamometer testing of heavy-duty road vehicles for the purpose of determining power delivered through the drive tires. b. A method of correcting observed power to reference test conditions. c. A method of analyzing the test data to determine if the test results are within expected power ranges.
This SAE Aerospace Recommended Practice (ARP) describes an industrial battery, lead-acid type, for use in electric powered ground support equipment.
This specification covers a 100% homopolymer of polychlorotrifluoroethylene (PCTFE) in the form of molded sheet 0.250 inch (6.35 mm) and under in nominal thickness.
This specification covers a premium aircraft-quality, corrosion-resistant steel in the form of sheet, strip, and plate.
This specification covers an aluminum alloy in the form of sand, investment, permanent mold, and composite mold castings with nominal wall thicknesses of up to 1.0 inch (25.4 mm), inclusive (see 8.8).
This specification covers steel cleanliness requirements for premium aircraft-quality ferromagnetic steels, including hardenable, corrosion-resistant steels, by magnetic particle inspection methods. This specification contains sampling, sample preparation, inspection procedures, and cleanliness rating criteria (see 8.2).
This specification covers a copper-zinc alloy (brass) in the form of laminated sheet with nominal thickness 0.006 to 0.125 inch (0.15 to 3.18 mm) (see 8.5).
This SAE Aerospace Standard (AS) establishes the requirements for a V-band grooved clamp couplings that are intended for use on fluid-line tubing joints, tailpipe joints, and accessory mount joints, on flight vehicles or other attachments. The semi-rigid coupling joint assemblies, hereafter referred to as “the joint”, shall operate within the temperature ranges specified in their applicable part standards.
This specification covers an aluminum alloy in the form of rolled or forged rings up to 6 inches (152 mm), inclusive, in nominal thickness at the time of heat treatment and having an OD to wall thickness ratio of 10 or greater (see 8.6).
This SAE Aerospace Standard (AS) covers miniature, composite, high density, threaded coupling, self-locking, circular, environment-resistant, electrical connectors utilizing removable crimp contacts, and associated hardware, which are capable of continuous operation within a temperature range of -65 to +175 °C (-85 to 347 °F). These connectors are supplied under an AS9100 reliability assurance program. See 6.1 for intended use and applications.
SCOPE IS UNAVAILABLE.
The following schematic diagrams reflect various methods of illustrating automotive transmission arrangements. These have been developed to facilitate a clear understanding of the functional interrelations of the gearing, clutches, hydrodynamic drive unit, and other transmission components. Two variations of transmission diagrams are used: in neutral (clutches not applied) and in gear. For illustrative purposes, some typical transmissions are shown.
The SAE J2923 procedure is a recommended practice that applies to on-road vehicles with a GVWR below 4540 kg equipped with disc brakes.
This specification covers accelerated curing synthetic rubber compounds with corrosion inhibitors and low adhesive strength supplied as a two-component system.
This data dictionary provides definitions for quantities, measurement units, reference systems, measurands, measurements, and quantity modalities commonly used in the command and control of cyber-physical systems. A cyber-physical system is an engineered system that is built from, and depends upon, the seamless integration of computational algorithms and physical components. Cyber-physical systems are often interconnected via data links and networks. The term encompasses intelligent vehicles and devices that operate in any environment, including robotic and autonomous systems.
Items per page:
50
1 – 50 of 215930