Search
Advanced Search
of the following are true
(
)

Results

Items (227,959)
Lithium and Lithium-Ion Cell and Battery Containment Performance Recommended PracticeJ3303_202510 (Current)10/2/2025
Prescribe test conditions to quantify the effectiveness of containment devices for containing thermal runaway hazards of lithium/lithium-ion cells, batteries, and equipment during storage resulting from the failure of a cell within the container. Due to the many storage locations (indoors, outdoors, etc.), the hazards shall be classified individually to allow for varying performance based on a given storage location.
Battery Transportation and Storage Committee
Use Cases for Customer Communication for Plug-In Electric VehiclesJ2836/5_202603 (Current)3/18/2026
This SAE Information Report establishes the Use Cases for communications and customer-focused Key Performance Indicators (KPI) between plug-in electric vehicles (PEVs) and their customers. The Use Case Scenarios define the information to be communicated related to customer convenience features for charge on/off control, charge power curtailment, customer preference settings, charging status, electric vehicle supply equipment (EVSE) availability/access, and electricity usage, plus customer information resulting from conflicts to charging preferences. It also addresses the KPI that can provide a uniform set of metrics to quantitively assess the charging experience. This document only provides the Use Cases that define the communications requirements to enable customers to interact with the PEV and the KPI to optimize their experience with charging a PEV. Specifications such as protocols and physical transfer methods for communicating information are not within the scope of this document.
Hybrid - EV Committee
Laboratory Testing of Vehicle and Industrial Heat Exchangers for Durability Under Vibration-Induced LoadingJ1598_202605 (Current)5/15/2026
This SAE Recommended Practice is applicable to all liquid-to-gas, liquid-to-liquid, gas-to-gas, and gas-to-liquid heat exchangers used in vehicle and industrial cooling systems. This document outlines the test to determine durability characteristics of the heat exchanger from vibration-induced loading.
Cooling Systems Standards Committee
Recommended Practice for Performance Rating of Lead Acid and Nickel Metal Hydride Electric Vehicle Battery ModulesJ1798/1_202605 (Current)5/19/2026
This SAE Recommended Practice provides for common test and verification methods to determine lead acid and nickel metal hydride electric vehicle battery module performance. The document creates the necessary performance tests to determine (a) what the basic performance of EV battery modules is, and (b) if battery modules meet minimum performance specification established by vehicle manufacturers or other purchasers. Specific values for these minimum performance specifications are not a part of this document.
Battery Standards Testing Committee
Guide to Engine Lubrication System MonitoringAIR1828D (Current)5/15/2026
This SAE Aerospace Information Report (AIR) provides information and guidance for the selection and use of technologies and methods for lubrication system monitoring of gas turbine aircraft engines. This AIR describes technologies and methods covering oil system performance monitoring, oil debris monitoring, and oil condition monitoring. Both on-aircraft and off-aircraft applications are presented. A higher-level view of lubrication system monitoring as part of an overall engine monitoring system (EMS) is discussed in ARP1587. The scope of this document is limited to those lubrication system monitoring, inspection, and analysis methods and devices that can be considered appropriate for health monitoring and routine maintenance. This AIR is intended to be used as a technical guide. It is not intended to be used as a legal document or standard.
E-32 Aerospace Propulsion Systems Health Management
Rating Air-Conditioner Evaporator Air Delivery and Cooling CapacitiesJ1487_202605 (Current)5/15/2026
The purpose of this SAE Recommended Practice is to establish uniform test procedures for measuring and rating air delivery and cooling capacity of truck and off-road self-propelled work machines used in earth moving, agriculture, and forestry air-conditioner evaporator assemblies. It is the intent to measure only the actual cooling capacity of the evaporator. It is not the intent of this document to rate and compare the performance of the total vehicle air-conditioning system.
Truck and Bus Windshield Wipers and Climate Control Comm
Advanced Composites Prepreg - Nominal 250 °F (121 °C) Cure - 12K Tow Carbon Fiber and Epoxy Resin, Plain Weave FabricAMS3914B (Current)5/15/2026
The intent of this specification is for the procurement of plain weave fabric epoxy prepreg product with 250 °F (121 °C) cure for aerospace applications; therefore, no qualification or equivalency threshold values are provided. Users that intend to conduct a new material qualification or equivalency program must refer to the production quality assurance section (see 4.3).
AMS P17 Polymer Matrix Composites Committee
Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety StandardSAEJ3097/ANSIZ26.1_202604 (Current)4/17/2026
Specifications, test methods, and usage provisions for safety glazing materials used for glazing of motor vehicles and motor vehicle equipment operating on land highways.
Glazing Materials Standards Committee
Standard Practice for Force Protection and SurvivabilitySAE1008A (Current)5/15/2026
According to SAE6906, Force Protection and Survivability (FPS) is the Human Systems Integration (HSI) domain that facilitates system operation and personnel safety during and after exposure to hostile situations or environments. Force protection refers to all preventive measures taken to mitigate hostile actions against Department of Defense (DoD) and Department of Homeland Security (DHS) (e.g., U.S. Coast Guard, Customs and Border Patrol, Immigration and Customs Enforcement, etc.) personnel. Survivability denotes the capability of the system and/or personnel manning the system to avoid or withstand man-made hostile environments without suffering an abortive impairment of his/her ability to accomplish its designated mission. Damage due to enemy or fratricidal action, or even equipment failure, will endanger the warfighters' well-being and place them into a life-threatening situation.
G-45 Human Systems Integration
Aluminum Alloy, Castings, 5.0Si - 1.2Cu - 0.50Mg (355.0-T51), Precipitation Heat TreatedAMS4210N (Current)4/24/2026
This specification covers an aluminum alloy in the form of castings (see 8.6).
AMS D Nonferrous Alloys Committee
Aluminum Alloy Castings, 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6), Solution and Precipitation Heat Treated, Dendrite Arm Spacing (DAS) ControlledAMS4241F (Current)4/24/2026
This specification covers an aluminum alloy in the form of castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Clad One Side Sheet, 0.6Mg - 0.35Si - 0.28Cu (No. 23 Brazing Sheet), As FabricatedAMS4465C (Current)4/26/2026
This specification covers an aluminum alloy in the form of sheet, clad on one side.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Clad Two Sides Sheet, 0.6Mg - 0.35Si - 0.28Cu (No. 24 Brazing Sheet), As FabricatedAMS4460C (Current)4/30/2026
This specification covers an aluminum alloy in the form of sheet, clad on two sides.
AMS D Nonferrous Alloys Committee
Hardness and Conductivity Inspection of Wrought Aluminum Alloy PartsAMS2658E (Current)5/6/2026
This specification establishes hardness and electrical conductivity acceptance criteria for finished or semifinished parts made from wrought aluminum alloys after heat treatment (see 8.6).
AMS D Nonferrous Alloys Committee
SAE Architecture Analysis and Design Language (AADL) Annex Volume 2:Annex B: Data Modeling AnnexAnnex D: Behavior Model AnnexAnnex F: ARINC653 AnnexAS5506/2 (Current)10/10/2025
AS-2C Architecture Analysis and Design Language
Predicting Photometric Degradation of Exterior Aircraft LightsARP6621 (Current)9/15/2025
This Aerospace Recommended Practice provides guidance for designers and specifiers of aircraft exterior lighting. Typical causes of light degradation and methods of predicting performance degradation in the aircraft environment are given. Although the document considers only exterior lighting, many of the principles and methods discussed apply to interior or flight deck lighting as well.
A-20B Exterior Lighting Committee
Procedures for the Sampling and Measurement of Particle Size Distributions from Aircraft Turbine EnginesAIR7382 (Current)11/12/2025
This document, expanding upon AIR6037A, provides technical specifications and operational protocols for instruments commonly used to measure aircraft engine nonvolatile Particulate Matter (nvPM) Particle Size Distributions (PSDs). For each instrument type, its functionality, calibration, uncertainties, and known limitations are discussed to support the development of procedures that help ARP6320B nvPM system operators reliably determine PSDs. Practical setup considerations, such as sample conditioning and instrument positioning, are highlighted, together with guidelines for maintenance, data correction, and quality control to minimize measurement uncertainty.
E-31P Particulate Matter Committee
Sleeving, Identification, Heat Shrinkable, General SpecificationAS6976A (Current)12/16/2025
This SAE Aerospace Standard (AS) establishes the requirements for various types of identification sleeving that will shrink to a predetermined size upon the application of heat after it has been marked using AS23053 sleeves as basis material. This AS does not cover specific carrier configuration.
AE-8D Wire and Cable Committee
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, TFE-GLASS-FEP, MEDIUM WEIGHT, SILVER-COATED COPPER CONDUCTOR, 600-VOLTAS22759/4B (Current)11/13/2025
AE-8D Wire and Cable Committee
Architecture Analysis & Design Language (AADL) Annex F: AADL Annex for the FACE™ Technical Standard Edition 3.0AS5506/4 (Current)10/13/2025
AS-2C Architecture Analysis and Design Language
Time‐Sensitive Networking for Aerospace Onboard Ethernet CommunicationsIEEE/SAEAS6675 (Current)11/7/2025
This standard specifies profiles of IEEE 802.1 Time-Sensitive Networking (TSN) and IEEE 802.1 Security standards for aerospace onboard bridged IEEE 802.3 Ethernet networks. The profiles select features, options, configurations, defaults, protocols, and procedures of bridges, end stations, and Local Area Networks to build deterministic networks for aerospace onboard communications.
AS-1A Avionic Networks Committee
Blackening of Steel, Touch-Up MethodAMS2489B (Current)4/1/2026
This specification covers the requirements for an inorganic black coating applied at ambient temperature to steel to touch up black oxide coating in areas where the black oxide has been removed. This coating is intended only to visually change the surface to a black color, not to meet the requirements of any black oxide specification.
AMS B Finishes Processes and Fluids Committee
Semiautomatic Headlamp Beam Switching DevicesJ565_202511 (Current)11/13/2025
This SAE Standard provides test procedures, performance requirements, and guidelines for semiautomatic headlamp beam switching (SHBSD) devices.
Road Illumination Devices Standards Committee
Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems (Supplement 1)AS1975SUP1A (Current)12/1/2025
This supplement forms a part of AS1975, Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems and shall be used to identify hose assembly standards citing this procurement specification.
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Steel, Corrosion-Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization, Solution, and Precipitation Heat Treated (H900), 180 ksi (1241 MPa) Tensile Strength (17-4)AMS5344H (Current)12/1/2025
This specification covers a corrosion-resistant steel in the form of investment castings homogenized and solution and precipitation heat treated to 180 ksi (1241 MPa) tensile strength.
AMS F Corrosion and Heat Resistant Alloys Committee
Desmutter, Aluminum LiquidAMS1626D (Current)3/1/2026
This specification covers materials in the form of a liquid used to remove smut from aluminum surfaces treated with etch-type oxidation and corrosion removers.
AMS J Aircraft Maintenance Chemicals and Materials Committee
Aluminum Alloy Sheet, 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn (6013-T4), Solution Heat Treated and Naturally AgedAMS4347F (Current)4/1/2026
This specification covers an aluminum alloy in the form of sheet from 0.020 to 0.249 inch (0.51 to 6.32 mm), inclusive, in thickness (see 8.6).
AMS D Nonferrous Alloys Committee
TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT WITH MULTIPLE OPENING SEALANT, 150 °C AND 200 °CAS83519/4A (Current)1/1/2026
AE-8C2 Terminating Devices and Tooling Committee
High Mounted Stop and Turn Signal Lamp for Use on Vehicles 2032 mm or More in Overall WidthJ1432_202602 (Current)3/23/2026
This SAE Recommended Practice provides test procedures, requirements, and guidelines for high-mounted stop lamps and high-mounted turn signal lamps intended for use on vehicles 2032 mm or more in overall width. This document applies to trucks, motor coaches, van type trailers, and other vehicles with permanent structure greater than 2800 mm high. This document does not apply to school buses, truck tractors, pole trailers, flat-bed trailers, pick-up trucks with dual wheels, and trailer converter dollies. The purpose of the high-mounted stop lamp(s) and high-mounted turn signal lamp(s) is to provide a signal to the driver of following (approaching a signaling vehicle from the rear) or oncoming (approaching a signaling vehicle from the front) vehicles over intervening vehicles.
Heavy Duty Lighting Standards Committee
Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting DevicesJ576_202601 (Current)1/1/2026
This SAE Recommended Practice is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. This document establishes additional performance requirements and provides test methods and requirements to evaluate the suitability of materials intended for optical applications in motor vehicles. The tests are intended to determine physical and optical characteristics of the materials only. Performance expectations of finished assemblies, including plastic components, are to be based on tests for lighting devices, as specified in SAE Standards and Recommended Practices for motor vehicle lighting equipment. Glass and materials inclusive to the light source are not in scope for this method.
Lighting Materials Standards Committee
Methyl Propyl KetoneAMS7297 (Current)4/1/2026
This specification establishes the physical and chemical characteristics for two grades of Methyl Propyl Ketone (MPK) solvent. MPK is also known as 2-Pentanone and Pentan-2-one.
AMS G9 Aerospace Sealing Committee
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 °F, 5080 PSI FLARELESS, 90° ELBOW TO 90° ELBOWAS5966C (Current)12/1/2025
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, REPOSITIONABLE TO STRAIGHT, 45° AND 90°, ENVIRONMENTAL, CABLE SEALING, SHIELD TERMINATION, CATEGORY 1A, (FOR MIL-DTL-83723 SERIES III, AS50151 CRIMP, AS81703 SERIES 3, MIL-DTL-26482 SERIES 2, AND AS95234 CONNECTORS)AS85049/150B (Current)12/1/2025
AE-8C1 Connectors Committee
Standard Exposed Junction Thermocouple for Controlled Conduction Errors in Measurement of Air or Exhaust Gas TemperatureARP690A (Current)4/1/2026
The thermocouple design recommended herein is presented as one for which the correction to the observed emf, because of thermal conduction along the stem and wires, is within the limits presented in the accompanying figure. On referring to the figure, it is seen that no restriction is placed upon the diameter of the thermocouple or stem, and the longitudinal dimensions are expressed in terms of wire and stem diameters. The type of stem, such as packed ceramic stock, refractory insulating tubing, etc., also is left open to choice. Thus the sizes of wires and supporting stems may be varied over wide ranges to match particular requirements where conduction errors are to be limited or controlled.
E-32 Aerospace Propulsion Systems Health Management
Nickel Alloy, Corrosion- and Heat-Resistant, Powder for Additive Manufacturing, 50Ni - 20Co - 17Cr - 3.1W - 2.3Ti - 2.1Al - 2.1Mo - 1.8Cb(Nb) - 1.5Ta - 0.04C - 0.005BAMS7075 (Current)1/1/2026
This specification covers a corrosion- and heat-resistant nickel alloy in the form of pre-alloyed powder.
AMS AM Additive Manufacturing Metals
Cobalt Alloy, Corrosion- and Heat-Resistant, Bars, Forging Stock, Forgings, and Rings, 52Co - 20Cr - 10Ni - 15W (L-605)AMS5759P (Current)4/1/2026
This specification covers a corrosion- and heat-resistant cobalt alloy in the form of bars, forgings, flash-welded rings, and stock for forging, flash-welded rings, or heading.
AMS F Corrosion and Heat Resistant Alloys Committee
Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Forging Stock, 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe, (Alloy 800), Solution Heat TreatedAMS5766G (Current)4/1/2026
This specification covers a corrosion- and heat-resistant iron-nickel-chromium alloy in the form of bars and forgings 4.0 inches (102 mm) and under and forging stock of any size.
AMS F Corrosion and Heat Resistant Alloys Committee
BAND INSTALLATION TOOL, HAND, ONE-STEP, FOR AS85049/128 CONNECTOR ACCESSORY CABLE SHIELD TERMINATING BANDSAS81306/1D (Current)1/1/2026
AE-8C2 Terminating Devices and Tooling Committee
TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, SINGLE, SERIES IAS81714/11C (Current)1/1/2026
AE-8C2 Terminating Devices and Tooling Committee
Interior DoorsARP499D (Current)1/27/2026
The purpose of this SAE Aerospace Recommended Practice (ARP) is to provide recommendations which will lead to the standardization of interior door design and operation in all transport aircraft. Interior doors are broadly classified into two main categories which include egress path doors and non-egress path doors. The scope of this ARP does not include crew rest doors, secondary barriers to the flight deck, or doors incorporated in furniture surrounding passenger seats as defined in AS6960.
S-9B Cabin Interiors and Furnishings Committee
CONNECTORS, PLUG, ELECTRIC, 45° ASSEMBLY, CRIMP CONTACT, AN TYPEAS34091B (Current)12/1/2025
AE-8C1 Connectors Committee
Guidelines and Procedures for Horizontal Directional Drilling (HDD) Machine Tracking Equipment OperatorsJ2519_202601 (Current)1/1/2026
These general guidelines and precautions apply to personnel operating directional drilling tracking equipment when used with horizontal directional drilling (HDD) machines as defined in ISO 21467:2023.
MTC9, Trenching and Horizontal Earthboring Machines
Automatic Transmissions - Schematic DiagramsJ647_202512 (Current)12/1/2025
The following schematic diagrams reflect various methods of illustrating automotive transmission arrangements. These have been developed to facilitate a clear understanding of the functional interrelations of the gearing, clutches, hydrodynamic drive unit, and other transmission components. Two variations of transmission diagrams are used: in neutral (clutches not applied) and in gear. For illustrative purposes, some typical transmissions are shown.
Automatic Transmission and Transaxle Committee
NUT, PLAIN, HEXAGON, UNS S66286AS9356D (Current)4/1/2026
E-25 General Standards for Aerospace and Propulsion Systems
Hydrogen Fuel Quality for Fuel Cell VehiclesJ2719_202604 (Current)4/1/2026
This standard provides background information and a hydrogen fuel quality standard for commercial proton exchange membrane (PEM) fuel cell electric vehicles. This standard also provides background information on how it was developed by the Interface Task Force (ITF) of the SAE Fuel Cell Standards Committee.
Fuel Cell Standards Committee
Air Brake Performance and Wear Test Code Commercial Vehicle Inertia DynamometerJ2115_202601 (Current)2/4/2026
This SAE Standard provides test procedures for air and air-over-hydraulic disc or drum brakes used for on-highway commercial vehicles over 4536 kg (10000 pounds) GVWR. This recommended practice includes the pass/fail criteria of Federal Motor Vehicle Safety Standard No. TP-121D-01.
Truck and Bus Foundation Brake Committee
Fuel Systems and Components - Electrostatic Charge MitigationJ1645_202602 (Current)2/1/2026
This SAE Surface Vehicle Recommended Practice deals with electrostatic charge phenomena that may occur in automotive fuel systems and applies to the following: Fuels that are in a liquid state at ambient temperatures and atmospheric pressures and are contained in vehicle fuel tanks that operate at or near atmospheric pressure. This includes gasoline and diesel fuels, as well as their blends with additives such as alcohols, esters, and ethers, whether the additives are petroleum based or bio-fuel based. The group of components that comprise the fuel system (in contact and not in contact with fuels). Other components in proximity to the fuel system that may be affected by electrostatic fields caused by the fuel system. Electrostatic phenomena that arise from, or are affected by, the following aspects of vehicle or fuel system operation: Flowing fuel in the fuel delivery system. Flowing fuel being dispensed to the vehicle while it is being fueled.
Fuel Systems Standards Committee
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90°, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)AS85049/8D (Current)1/1/2026
AE-8C1 Connectors Committee
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, REMOVABLE, SOLDERLESS WRAPPOST TERMINATION (FOR MIL-DTL-38999 SERIES I, II, III, AND IV, MIL-DTL-24308, AND MIL-DTL-55302/68, /71, AND /75 CONNECTORS)AS39029/72B (Current)4/1/2026
AE-8C1 Connectors Committee
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-28748/3 AND MIL-DTL-28748/13 CONNECTORS)AS39029/35D (Current)4/1/2026
AE-8C1 Connectors Committee
Items per page:
1 – 50 of 227959