Search
Advanced Search
of the following are true
(
)

Results

Items (215,777)
Pyrotechnic Actuator for Fast Action Electrical Protection in HVDC Aerospace ApplicationAIR7258 (Current)
The scope of this report is to establish applicable definitions and terms prior to considering the application domain and use cases in HVDC applications. The report describes the specificities of the pyrotechnic actuator for use within a power-switching device with performances and main characteristics to consider for aerospace application.
AE-10 High Voltage Committee
Counterfeit Materiel; Assuring Acquisition of Authentic and Conforming MaterielAS6174B (Current)2/17/2026
This SAE Standard provides requirements and guidance to: Develop a Materiel authenticity plan. Procure Materiel from reliable sources. Assure authenticity and conformance of procured Materiel, including methods such as certification, traceability, testing, and inspection appropriate to the Commodity/item in question. Control Materiel identified as counterfeit. Report Suspect or Counterfeit Materiel to other potential users and Authorities Having Jurisdiction.
G-21 Counterfeit Materiel Committee
Recommendations for ADS-DVs to Accommodate the Needs of People with DisabilitiesJ3261_202602 (Current)2/17/2026
ADS-DVs promise to expand transportation options for individuals who have been historically underserved in personal transportation. However, for this to be truly realized, the unique needs of persons with disabilities (PWDs; including those who are deaf and hard of hearing, blind, have low vision, have upper body limitations, have lower body limitations, are wheelchair users, and have cognitive disabilities) should be understood at the design stage of vehicle development. This document presents a list of recommendations for use in the design and development of ADS-DVs based on the identified needs of PWDs. It considers the accessibility of services used to interact with the ADS-DV before the trip and the complete trip (including planning the trip and requesting the vehicle, determining a pickup location, finding the vehicle, authenticating the user, entering the vehicle, interacting with the vehicle while inside, determining a drop-off location, exiting the vehicle, and finding the
On-Road Automated Driving (ORAD) Committee
Failure Modes for High-Lift Actuation Load PathsAIR7061 (Current)2/17/2026
This SAE Aerospace Information Report provides examples of single failure modes for components used in fixed-wing, high-lift actuation systems’ load paths, as well as the typical hazards posed by those failures at the aircraft level.
A-6B3 Electro-Mechanical Actuation Committee
Airport Electrical Power System HarmonicsAIR5387 (Current)2/17/2026
This SAE Aerospace Information Report (AIR) is intended to cover all airport 50 or 60 Hz electrical systems as well as all electrical utilization equipment that is attached to those systems.
AGE-3 Aircraft Ground Support Equipment Committee
Tools for Peening Intensity Determination and VerificationJ442_202602 (Current)2/17/2026
This SAE Recommended Practice defines requirements for equipment and supplies to be used in measuring shot peening intensity and other surface enhancement processes. It is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances. Guidelines for use of these items can be found in SAE J443 and SAE J2597.
Surface Enhancement Committee
Method of Evaluating Pneumatic Ground Power UnitsAIR4545A (Current)2/17/2026
This SAE Aerospace Information Report (AIR) covers, and is restricted to, the behavior of air under conditions of critical and subcritical flow at temperatures less than 500 °F.
AGE-3 Aircraft Ground Support Equipment Committee
FITTING, ELBOW, 45°, PIPE, INTERNAL AND EXTERNAL THREADAS4855B (Current)2/16/2026
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO 45°AS4470D (Current)2/16/2026
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
FITTING, ELBOW, 90°, PIPE, INTERNAL AND EXTERNAL THREADAS4854B (Current)2/16/2026
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO 90°AS4471D (Current)2/16/2026
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 45° TO 90°AS4473D (Current)2/16/2026
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Aerospace Series - Quality Management Systems Statistical Product Acceptance RequirementsAS9138 (Current)1/20/2018
This standard establishes requirements when implementing statistical product acceptance methods to meet defined risk requirements. This standard also establishes the minimum content required to be covered in an organization’s documented procedures that govern their application of statistical product acceptance methods. These general requirements and documented procedures apply the requirements of the 9100/9110/9120 quality management system standards, in addition to establishing requirements for retrievability, safety/critical characteristics, and quality parameters that protect the customer.
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
Aerospace Series - Root Cause Analysis and Problem Solving (9S Methodology)ARP9136 (Current)11/8/2016
The objective of any organization, as part of continual improvement, is to reduce the number of issues (i.e., undesirable conditions, defects, failures) and to minimize their impact on quality, delivery performance, and cost. This includes having processes in place to detect and eradicate significant and recurrent issues, which implies having well identified problems, a common understanding of their impact and associated root causes, and having defined and implemented adequate actions so that these problems, including similar issues will not happen again.
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
Aerospace Series – Requirements for Advanced Product Quality Planning and Production Part Approval ProcessAS9145 (Current)11/8/2016
This standard establishes requirements for performing and documenting APQP and PPAP. APQP begins with conceptual product needs and extends through product definition, production planning, product and process validation (i.e., PPAP), product use, and post-delivery service. This standard integrates and collaborates with the requirements of the 9100, 9102, 9103, and 9110 standards. The requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
Terms, Definitions, and Acronyms Counterfeit Materiel or Electrical, Electronic, and Electromechanical PartsAIR6273 (Current)7/30/2019
The SAE Aerospace Information Report (AIR) provides standardized terms, definitions, and acronyms that may be used in the G-19 and G-21 documents, unless otherwise specified in those documents. The SAE International series of documents that address the mitigation of suspect and counterfeit parts will reference this document in their respective Applicable Documents sections. This AIR is for use by organizations that procure and/or use materiel or EEE parts. The terms and definitions of this AIR are intended to be used in conjunction with other G-19 and G-21 standards.
G-19 Counterfeit Electronic Parts Committee
Aerospace Operator Self-Verification ProgramsAS9162 (Current)11/8/2016
This document identifies the basic elements and provides a standard for structuring operator self-verification programs within the aviation, space, and defense industry for producers of commercial and military aircraft and weapons platforms, space vehicles, and all related hardware, software, electronics, engines, and composite components. The requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
在 9100 质量管理体系内 应用 AQAP 2110 的指南IA9137_ZHCN (Current)2/16/2024
编制和发布本文件旨在供应商遵守 9100 规定的情况下，就 AQAP-2110 的应用提供相关信息和指南。本文件的发布号为 AQAP-2110-SRD.2 和 IA9137。本文件由 NATO 和行业代表联合编制，供 NATO 和行业内使用，旨在促进 AQAP-2110 和 9100 的使用及对其之间关系的理解。当采购国使用对外军售 (FMS) 作为其采购方式时，可能需要 AQAP。 本文件旨在促进采购方及其 9100 供应商对 AQAP-2110 要求解释的通用性。 本文件内容不具有法律或合同地位，亦不会取代、增加或取消 AQAP-2110 或 9100 的任何要求。 由于可能存在多种条件（取决于工作或过程类型、所用设备和所涉人员的技能等因素），不应将本指南视为包含所有事宜，亦不应将本指南视为强加满足合同要求的具体手段或方法。相关方应意识到，可使用其他手段或方法来满足这些要求。 本指南使用者应谨记，当合同引用了 AQAP 2110，其要求对于供应商和次级供应商具有强制性。
IAQG-1 Standards Committee
Anleitung zur Anwendung von AQAP 2110 in einem 9100 QualitätsmanagementsystemIA9137_DEDE (Current)2/16/2024
Dieses Dokument wurde erstellt und veröffentlicht, um Informationen und Anleitungen zur Anwendung von AQAP-2110 zu geben, wenn der Auftragnehmer die Anforderungen der Norm 9100 erfüllt. Dieses Dokument wird als AQAP-2110-SRD.2 und IA9137 veröffentlicht. Es wurde zur Erleichterung der Anwendung und des Verständnisses der Beziehung zwischen AQAP-2110 und 9100 gemeinsam von Vertretern der NATO und der Industrie entwickelt. AQAPs können erforderlich sein, wenn eine beschaffende Nation Foreign Military Sales (FMS) als Beschaffungsmethode verwendet. Es soll zu einer einheitlichen Auslegung der AQAP-2110-Anforderungen durch den Auftraggeber und seinen 9100-Auftragnehmer beitragen. Sein Inhalt hat keinen rechtlichen oder vertraglichen Status und ersetzt, ergänzt oder hebt keine der Anforderungen von AQAP-2110 oder 9100 auf. Aufgrund der Vielzahl von Bedingungen, die bestehen können (abhängig von Faktoren wie der Art der Arbeit oder des Prozesses, den verwendeten Geräten und den Fähigkeiten des
IAQG-1 Standards Committee
Linee guida per l’impiego della AQAP 2110 in un Sistema di gestione per la qualità 9100IA9137_ITIT (Current)2/16/2024
Il presente documento è stato preparato e rilasciato al fine di fornire informazioni e linee guida sull’applicazione della AQAP-2110, laddove il fornitore si attenga a quanto previsto dalla 9100. Il presente documento viene pubblicato come AQAP-2110-SRD.2 e IA9137. Il documento è stato sviluppato congiuntamente dalla NATO e dai rappresentanti dell’industria affinché sia utilizzato dalla NATO e dall’industria per facilitare l’utilizzo e la comprensione del rapporto tra la AQAP-2110 e la 9100. Le AQAP possono costituire un requisito qualora un Paese acquirente utilizzi le Foreign Military Sales (FMS) come proprio metodo di approvvigionamento. Esso mira a contribuire all’interpretazione condivisa dei requisiti della AQAP-2110 da parte dell’acquirente e del fornitore 9100. Il suo contenuto non ha natura giuridica o contrattuale, né sostituisce, integra o annulla alcuno dei requisiti della AQAP-2110 o della 9100. A causa della molteplicità delle condizioni che possono sussistere (dipendenti
IAQG-1 Standards Committee
Guidance for the Application of AQAP 2110 within a 9100 Quality Management SystemIA9137 (Current)2/16/2024
This document has been prepared and issued to provide information and guidance on the application of AQAP-2110 when the supplier adheres to the provisions of 9100. This document is published as AQAP-2110-SRD.2 and IA9137. It was jointly developed by NATO and industry representatives for use by NATO and industry to facilitate the use and understanding of the relationship between the AQAP-2110 and 9100. AQAPs may be required when an acquiring nation use Foreign Military Sales (FMS) as its procuring method.
IAQG-1 Standards Committee
Delegated Product Release VerificationAS9117 (Current)3/29/2016
This standard specifies requirements for DPRV to establish common product/service requirements for use at all levels of the supply chain. This standard shall apply when an organization elects to delegate product release verification by contractual flow down to their supplier (reference 9100 and 9110 standards); to perform product acceptance on their behalf. The delegating organization shall use this standard as the baseline for establishing a DPRV process, although they may include additional contract requirements to meet their specific needs.
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
Requirements for Developing and Qualifying Alternate Inspection Frequency PlansAS13002 (Current)3/17/2015
This document covers the process to be applied to design characteristics (as defined in AS9102), parts or inspection processes as defined by the purchaser. Design characteristics not included within the scope include electronic, electromechanical or mechanical systems where alternative means of acceptance are approved such as through acceptance test procedures (ATPs). This document does not define processes for identifying or communicating the classification of the parts or design characteristics. This document does not define the procedure to qualify a supplier to undertake these requirements. It is expected that each purchaser will have a procedure to manage the flow-down of these requirements. This document applies to suppliers that demonstrate adequate proficiency in applicable process control methods as determined by the purchaser.
G-22 Aerospace Engine Supplier Quality (AESQ) Committee
Exigences en résolution de problèmes pour les fournisseursAS13000FR (Current)5/29/2014
Le fournisseur devra utiliser le processus qui suit pour répondre à une demande du client d’action corrective et préventive.
G-22 Aerospace Engine Supplier Quality (AESQ) Committee
9100品質マネジメントシステムにおけるAQAP 2110の適用に関するガイダンスIA9137_JA (Current)2/16/2024
この文書は、供給者が9100の規定を遵守する場合の、AQAP-2110の適用に関する情報及びガイダンスを提供するために作成され、発行された。この文書は、AQAP-2110-SRD.2及びIA9137として発行されている。この文書は、NATO及び業界によるAQAP-2110及び9100の関係の理解及び利用を容易にするために、NATO及び業界の代表者が協同で策定した。AQAPは、調達国が対外有償軍事援助（FMS）を調達手段として利用する場合に、必要となる場合がある。 この文書の目的は、調達者及びその9100供給者によるAQAP-2110要求事項の解釈の共通化に寄与することである。 この文書の内容は法的位置づけも契約上の位置づけも有せず、AQAP-2110の要求事項又は9100の要求事項のいずれに対しても取って代わるものでも、追加するものでも、削除するものでもない。 様々な状況が、作業、工程の種類、又は使用される機器、及び関わる要員のスキルのような要因に左右されて存在し得るため、このガイダンスは網羅的なものと見なされることも、また、契約書の要求事項を満たすための特定の手段や方法を義務付けるものと見なされることも望ましくない。ステークホルダーは、これらの要求事項を満たすために、他の手段や方法が使用され得ることを認識すべきである。 このガイダンスの利用者は、AQAP 2110要求事項が、契約書に引用されているとおり、供給者や二次供給者に義務付けられていることに留意することが望ましい。
IAQG-1 Standards Committee
Manufacturing Management Program ChecklistAS6500A_SACKLST (Current)9/27/2022
This compliance assessment tool supports the summary of requirements applicable to AS6500A, including potential documentation to demonstrate compliance along with tailoring options and company policies. The standard is applicable to all phases of the system acquisition life cycle. It is intended for use on all programs with manufacturing content. It requires proven manufacturing management practices with the goal of delivering affordable and capable systems to the extent that it is invoked contractually.
G-23 Manufacturing Management Committee
Unsalvageable Items Management – Requirements for Aviation, Space, and Defense OrganizationsAS9147 (Current)5/20/2021
This standard is applicable to all items used for manufacturing, maintenance, and repair of aviation, space, and defense products from the raw material to the final product (e.g., aircraft, structural items, constituent assemblies, standard parts, consumables with conformity and/or safety impact). This standard considers items dispositioned as scrap in accordance with 9100-series standards’ supporting nonconformity management, corrective action, or organization decisions (e.g., obsolescence, inventory management, missing traceability documentation). The requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the applicable statutory or regulatory requirements take precedence. This standard defines requirements and actions to be taken after the disposition decision to control the
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
Compliance Verification Matrix (VM) Slash Sheet for AS6174A, Counterfeit Materiel; Assuring Acquisition of Authentic and Conforming MaterielAS6174/1 (Current)4/11/2017
The verification matrix (VM) in this slash sheet is intended for use to establish compliance to AS6174A. This slash sheet is applicable to AS6174A. Nothing in this slash sheet, however, supersedes applicable laws and regulations, unless a specific exemption has been obtained through judicial/legal channels.
G-21 Counterfeit Materiel Committee
9100 품질관리시스템 내 AQAP 2110 적용에 관한 지침IA9137_KOKR (Current)2/16/2024
이 문서는 공급자가 9100의 조항을 준수하고자 할 때 AQAP-2110을 적용하는 것에 관한 정보와 지침을 제공하기 위해 작성 및 발행된 것이다. 이 문서는 AQAP-2110-SRD.2 및 IA9137로 간행된다. 이는 NATO와 산업계에서 AQAP-2110과 9100 간의 관계에 대한 이해와 활용을 촉진하기 위해 NATO와 산업계 대표들이 공동으로 작성한 것이다. 획득 국가가 자국의 조달 방법으로 대외군사판매(FMS)를 이용할 때는 AQAP가 필요할 수 있다. 이 문서는 획득 국가와 9100을 준수하고자 하는 공급 국가의 AQAP-2110 요구사항 해석에 있어 공통성을 제공하는 데에 목적을 두고 있다. 이 문서의 내용은 법적 또는 계약상의 지위를 갖지 않으며, 일체의 AQAP-2110 또는 9100 요구사항을 대체하거나 그 요구사항에 추가되는 것도 아니다. 있을 수 있는 조건의 다양성(작업 또는 공정의 유형, 사용 기기 및 관련 인원의 역량에 따르는) 때문에, 이 지침이 모든 것에 적용되는 것으로 간주하거나, 계약 요구사항 충족에 필요한 특정 수단 또는 방법을 강요하는 것으로 간주해서는 안 된다. 이해당사자들은 이러한 요구사항을 충족하기 위해 다른 수단 또는 방법을 사용할 수도 있다는 점을 알고 있어야 한다. 이 지침 사용자는 계약서에 명시되는 바와 같이 AQAP 2110 요구사항이 공급자와 하청업체가 지켜야 하는 의무사항임을 명심해야 한다.
IAQG-1 Standards Committee
Guide pour l’application de l’AQAP 2110 dans un Système de Management de la Qualité 9100IA9137_FRFR (Current)2/16/2024
Ce document a été élaboré et publié en vue de fournir des informations et un guide pour l’application de l’AQAP-2110 lorsque le fournisseur se conforme aux dispositions de la 9100. Ce document est publié en tant qu’AQAP -2110-SRD.2 et IA9137. Il a été élaboré conjointement par l’OTAN et les représentants de l’industrie pour utilisation par l’OTAN et l’industrie de façon à faciliter l’utilisation et la compréhension de la relation entre l’AQAP-2110 et la 9100. Les AQAP peuvent être exigées lorsqu’un État acquéreur utilise les Ventes Militaires Etrangères (VME) comme méthode d’approvisionnement. Son but est de contribuer à une communauté d’interprétation des exigences de l’AQAP-2110 par l’acquéreur et son fournisseur 9100. Son contenu n’a aucun statut légal ou contractuel, ni ne remplace, s’ajoute à ou ne supprime aucune des exigences de l’AQAP-2110 ou de la 9100. En raison de la multiplicité des conditions susceptibles d’exister (en fonction de facteurs tels que le type de travail ou de
IAQG-1 Standards Committee
Guía para la aplicación de la PECAL 2110 (AQAP 2110) dentro de un Sistema de Gestión de la Calidad 9100IA9137_ESES (Current)2/16/2024
Este documento se ha preparado y emitido para proporcionar información y orientación sobre la aplicación de la PECAL 2110 cuando el suministrador se adhiere a las disposiciones de la norma 9100. Este documento se publica como anexo a la AQAP-2110-SRD.2 e IA9137. Ha sido desarrollado conjuntamente por la OTAN y los representantes de la industria para utilizarlo en la OTAN y en la industria a fin de facilitar el uso y la comprensión de la relación entre la PECAL 2110 y la norma 9100. Las PECAL pueden ser necesarias cuando una nación compradora utiliza el programa Foreign Military Sales (FMS) como método de adquisición. Pretende contribuir a una interpretación unificada de los requisitos de la PECAL 2110 por parte del comprador y de su suministrador 9100. Su contenido no tiene estatus legal ni contractual, ni sustituye, añade ni cancela ningún requisito de la PECAL 2110 o la norma 9100. Debido a la multitud de condiciones que pueden existir (en función de factores tales como el tipo de
IAQG-1 Standards Committee
Aerospace Series - Non-Deliverable Software RequirementsAS9125 (Current)10/1/2024
This standard defines the requirements for the effective control of non-deliverable software. This standard can be used during the design, development, test, production, release, use, maintenance, and retirement of non-deliverable software. This can include non-deliverable software procured from external suppliers and utilized in the design, production, evaluation, test, acceptance, or calibration of a deliverable product. This standard focuses solely on the unique requirements of the operational processes that pertain to non-deliverable software as identified by clause 1.2. Operational processes not covered in this standard are addressed by the respective organization’s Quality Management System (QMS), based on the 9100-series (i.e., 9100, 9110, 9120) and/or ISO 9001 standards. If there is a conflict between the requirements of this standard, and customer or applicable statutory/regulatory requirements, the latter shall take precedence.
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
Counterfeit Materiel; Assuring Acquisition of Authentic and Conforming BearingsAS6834 (Current)5/24/2024
The purpose of this document is to provide detailed requirements to preclude the acquisition and use of suspect counterfeit or counterfeit bearings and/or bearing components/materiel. The term bearings referenced throughout this document includes bearings and/or bearing components/materiel (e.g., balls, races, lubricant, cage, seal). The requirements of this document supplement the requirements of a higher-level quality standard (e.g., AS/EN/JISQ9100, ISO 9001, ANSI/ASQ E4, ASME NQA-1, AS9120, AS9003, and IATF 16949 or equivalent) and other quality management system documents. All appendices are provided for guidance and are not mandatory.
G-21 Counterfeit Materiel Committee
HFC-134a (R-134a) Recovery/Recycle/Recharging Equipment for Mobile Air-Conditioning SystemsJ2788_202602 (Current)2/12/2026
The purpose of this SAE Standard is to establish the specific minimum equipment performance requirements for recovery and recycling of HFC-134a that has been directly removed from, and is intended for reuse in, mobile air-conditioning (A/C) systems. It also is intended to establish requirements for equipment used to recharge HFC-134a to an accuracy level that meets Section 9 of this document and SAE J2099. The requirements apply to the following types of service equipment and their specific applications: a. Recovery/recycling equipment b. Recovery/recycling - refrigerant charging c. Refrigerant recharging equipment only
Interior Climate Control Service Committee
Manufacturing Management Program Standard + ChecklistAS6500A_CKLST (Current)9/27/2022
This compliance assessment tool supports the summary of requirements applicable to AS6500A, including potential documentation to demonstrate compliance along with tailoring options and company policies. The standard is applicable to all phases of the system acquisition life cycle. It is intended for use on all programs with manufacturing content. It requires proven manufacturing management practices with the goal of delivering affordable and capable systems to the extent that it is invoked contractually.
G-23 Manufacturing Management Committee
Control of Aviation Critical Safety ItemsAS9017 (Current)3/17/2017
This document is intended to prescribe consistent requirements for CSI management for organizations and suppliers who perform work for prime contractors receiving direct contracts from U.S. government agencies (i.e., first-tier or prime suppliers).
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
Counterfeit Materiel, Assuring Acquisition of Authentic and Conforming FastenersAS6832 (Current)6/9/2020
The purpose of this document is to provide detailed requirements to preclude the use of suspect counterfeit or counterfeit fasteners. The requirements of this document are intended to supplement the requirements of a higher-level quality standard (e.g., AS/EN/JISQ9100, ISO 9001, ANSI/ASQC E4, ASME NQA-1, AS9120, AS9003, and ISO/TS 16949 or equivalent) and other quality management system documents. Fasteners are defined as United States Federal Supply Classification Group codes as shown in the following list: This document applies to metallic and non-metallic components that mechanically attach two or more objects: fasteners, screws, bolts, rivets (blind, solid, tubular), inserts, washers, nuts, latching handles, clamps, pins, nails, retainers, etc. If locking or treatment elements such as glue, adhesives, anti-galling, lubricant, or other materials are part of the fastener specifications, then those items are within the scope of this document. For metallic raw materials used in the
G-21 Counterfeit Materiel Committee
Aerospace Series - Certificate of Conformity RequirementsAS9163 (Current)12/7/2022
This SAE Aerospace Standard (AS) provides a harmonized process and documentation requirements for the establishment of CoCs used to attest the conformity of aviation, space, and defense products (e.g., assemblies, sub-assemblies, equipment and systems, parts, material, software) or services. It includes a CoC template and supporting instructions on how to complete it. When quoted by the customer in a contractual requirement, application of this document is mandatory. In other cases, its use is recommended, but if there is a conflict between the requirements of this standard and customer or applicable statutory/regulatory requirements, the latter shall take precedence. Requirements for the establishment of Authorized Release Certificates (ARCs)—e.g., European Union Aviation Safety Agency (EASA) Form 1, Federal Aviation Administration (FAA) 8130-3 tag, Civil Aviation Administration of China (CAAC) Form 038—by an external provider holding a production approval (for new aviation products
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
Sistemas de Gestão da Qualidade - Requisitos de Auditoria para Organizações de Aviação, Aeroespacial e DefesaAS9101F_PTBR (Current)10/31/2016
Para garantir a satisfação dos clientes as organizações de defesa, aviação e aeroespacial devem fornecer e melhorar continuamente produtos e serviços, seguros e confiáveis, que atendam ou excedam os requisitos legais e regulamentares aplicáveis dos clientes. A globalização da indústria e a diversidade resultante das necessidades e expectativas regionais e nacionais têm dificultado este objetivo. As organizações têm o desafio de comprar produtos e serviços de fornecedores em todo o mundo, em todos os níveis da cadeia de suprimento. Os fornecedores têm o desafio de fornecer produtos e serviços a vários clientes com diferentes necessidades e expectativas de qualidade.
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
Quality Management Systems - Requirements for Aviation, Space, and Defense OrganizationsAS9100D (Current)9/20/2016
This standard includes ISO 9001:20152 quality management system requirements and specifies additional aviation, space, and defense industry requirements, definitions, and notes. It is emphasized that the requirements specified in this standard are complementary (not alternative) to customer and applicable statutory and regulatory requirements. If there is a conflict between the requirements of this standard and customer or applicable statutory or regulatory requirements, the latter shall take precedence. This International Standard specifies requirements for a quality management system when an organization: a needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and b aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
Foreign Object Damage (FOD) Prevention Program - Requirements for Aviation, Space, and Defense OrganizationsAS9146 (Current)9/8/2022
This standard defines FOD Prevention Program requirements for organizations that design, develop, and provide aviation, space, and defense products and services; and by organizations providing post-delivery support, including the provision of maintenance, spare parts, or materials for their own products and services. It is emphasized that the requirements specified in this standard are complementary (not alternative) to customer, and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.
G-14 Americas Aerospace Quality Standards Committee (AAQSC)
Automatic Transmissions - Schematic DiagramsJ647_202512 (Current)1/11/2026
The following schematic diagrams reflect various methods of illustrating automotive transmission arrangements. These have been developed to facilitate a clear understanding of the functional interrelations of the gearing, clutches, hydrodynamic drive unit, and other transmission components. Two variations of transmission diagrams are used: in neutral (clutches not applied) and in gear. For illustrative purposes, some typical transmissions are shown.
Automatic Transmission and Transaxle Committee
Low Speed Thorax Impact Test Procedure for the HIII 50th Male DummyJ2779_202206 (Current)6/29/2022
Dummy Testing and Equipment Committee
Engine Rotation and Cylinder NumberingJ824_202206 (Current)6/29/2022
This SAE Standard was developed to provide a method for indicating the direction of engine rotation and numbering of engine cylinders. The document is intended for use in designing new engines to eliminate the differences which presently exist in industry.
Engine Power Test Code Committee
Maintenance of Ground Support EquipmentAIR4286 (Current)2/12/2026
The following are suggested policies, procedures, and practices required to maintain mobile and fixed ground support equipment at airport passenger and cargo terminals. The principal purpose for ground support equipment maintenance is to provide the owner/user with safe, serviceable equipment, in good appearance, at minimal cost, and with minimum downtime. Maintenance programs initiated on ground support equipment must also conform to regulations controlling airport operations. This document has been divided into three sections corresponding to the three stages of equipment life; acquisition, maintenance, and disposal.
AGE-3 Aircraft Ground Support Equipment Committee
J1979-DA, Digital Annex of E/E Diagnostic Test ModesJ1979DA_202510 (Current)10/21/2025
The SAE J1979 document set includes the communication between the vehicle's On-Board Diagnostic (OBD) systems and test equipment implemented across vehicles within the scope of regulated emissions and propulsion related OBD. The SAE J1979 Digital Annex supplements the J1979 base documents primarily by maintaining a global registry of regulated emissions and propulsion related data identifiers.
Vehicle E E System Diagnostic Standards Committee
Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024 -T361 Sheet/Plate with 1½% Alclad) Solution Heat Treated, 6% Cold Worked and Naturally AgedAMS4194F (Current)2/13/2026
This specification covers an aluminum alloy in the form of sheet and plate, alclad both sides, supplied in the -T361 temper.
AMS D Nonferrous Alloys Committee
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 90°, SHIELD TERMINATION, CATEGORY 3A (FOR AS50151 CRIMP, AS95234, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)AS85049/24E (Current)2/12/2026
AE-8C1 Connectors Committee
FITTING, CROSS, PIPE, INTERNAL THREADAS4858B (Current)2/12/2026
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Vehicle-Level Validation Test Procedures for V2V Safety CommunicationsJ3161/1A_202602 (Current)2/11/2026
This document provides vehicle-level data collection, data analysis, and data verification procedures that may be used to verify that an instrument under test (IUT) satisfies the vehicle-level requirements specified in SAE J3161/1. For the purposes of this report, “vehicle-level requirements” primarily consist of those requirements which can be verified external to the vehicle. The IUT for these procedures is a configured LTE-V2X vehicle-to-vehicle (V2V) device as defined in SAE J3161/1 and is installed on a vehicle of class 2, 3, 4, or 5. While the IUT is conceptually separated from the vehicle it is installed on, the tests outlined in this document are primarily vehicle level, so the terms “vehicle” and “IUT” can generally be considered interchangeable. Additionally, non-vehicle-level complementary tests, not included in this document, are required to verify that the entire set of requirements specified in SAE J3161/1 is satisfied. This document also includes a Traceability Matrix to
C-V2X Technical Committee
Items per page:
1 – 50 of 215777