Search
Advanced Search
of the following are true
(
)

Results

Items (216,101)
Missile Hydraulic Pumps and Their Power SourcesAIR560D (Current)
This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.
A-6C4 Power Sources Committee
Test Procedures for Shear Strength of Automotive Brake Pads and Brake Lining AssembliesJ840_202603 (Current)3/31/2026
This SAE Recommended Practice covers equipment capabilities and the test procedure to quantify and qualify the shear strength between the friction material and backing plate or brake shoe for automotive applications. This SAE Recommended Practice is applicable to: bonded drum brake linings; integrally molded disc brake pads; disc brake pads and backing plate assemblies using mechanical retention systems (MRS); coupons from drum brake shoes or disc brake pad assemblies. The test and its results are also useful for short, semi-quantitative verification of the bonding and molding process. This Recommended Practice is applicable during product and process development, product verification and quality control. This Recommended Practice does not replicate or predict actual vehicle performance or part durability.
Brake Linings Standards Committee
FITTINGS, INSTALLATION OF FLARELESS TUBE, STRAIGHT-THREADED CONNECTORSAS33566A (Current)3/30/2026
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .1900-32 UNJF-3AAS3303B (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
STUD - STRAIGHT, RING LOCKED, CORROSION AND HEAT RESISTANT STEEL (UNS S66286), .3125-18 UNJC X .3125-24 UNJFAS3321F (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, TEE HEAD – CHAMFERED, PD SHANK NICKEL ALLOY (UNS N07001),165 KSI MIN UTS .3750-24 UNJF-3AAS3235D (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .2500-28 UNJF-3AAS3307B (Current)3/30/2026
E-25 General Standards for Aerospace and Propulsion Systems
Safety and Cybersecurity Recommendations for the Use of the Rust Language in Critical SystemsJA1020_202603 (Current)3/26/2026
This document provides guidance to using Rust in critical and safety-related software. The document summarizes how the usage of Rust supports in arguing safety according to ISO 26262 or RTCA DO-178C combined with RTCA DO-332. Cybersecurity best practices are referenced as these requirements largely overlap with those implemented for safety. As the Rust language is still evolving, this document targets the 2021 and 2024 editions of the language. Older or newer editions might require additional or changed rules and guidelines. Generally, the newest available edition of the language should be selected as newer editions remove ambiguities and outdated parts from the language.
Functional Safety Committee
Evaluation Criteria for Reliability-Centered Maintenance (RCM) ProcessesJA1011_202411 (Current)11/6/2024
This SAE Standard for reliability-centered maintenance (RCM) is intended for use by any organization that has or makes use of physical assets or systems that it wishes to manage responsibly.
G-11M, Maintainability, Supportability and Logistics
Cyber-Physical Systems Security Engineering Plan (CPSSEP)JA7496_202206 (Current)6/2/2022
This SAE Standard establishes practices to: a Manage risk and ensure security of a cyber-physical system (CPS) throughout its life cycle by utilizing systems engineering principles; b Assess the impact of cyber-physical systems security (CPSS) objectives and requirements; c Assess the security risks to CPS technical effectiveness and functions, and address weaknesses and vulnerabilities; d Address various domains of consideration (see 3.1) that take into account operating conditions of the system, command and control, configuration management (refer to SAE EIA649), etc., that could negatively impact CPSS or CPS-designed purpose; e Perform design validation and verification to assess security and risk of the CPS.
G-32 Cyber Physical Systems Security Committee
Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 7300 (32,472) Breaking Strength Twill, Resin TreatedAMS3798/13C (Current)4/14/2015
This specification covers one width and one breaking strength of low-modulus aramid webbing
AMS P Polymeric Materials Committee
Microspheres, Carbon HollowAMS3753C (Current)11/18/2016
This specification covers carbon in the form of hollow microspheres.
AMS P Polymeric Materials Committee
Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or ExtrusionsAMS3678/6B (Current)2/29/2016
This specification covers a polytetrafluoroethylene (PTFE) resin filled with 60% bronze powder in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
AMS P Polymeric Materials Committee
Tolerances Carbon and Alloy Steel TubingAMS2253F (Current)2/24/2018
This specification covers established inch/pound manufacturing tolerances applicable to carbon and alloy tubing ordered to inch/pound dimensions. These tolerances apply to all conditions unless otherwise noted. The term “excl” is used to apply only to the higher figure of the specified range.
AMS E Carbon and Low Alloy Steels Committee
Silicone Rubber Sponge Closed Cell, Medium, Extreme Low TemperatureAMS3193F (Current)6/14/2019
This specification covers a silicone rubber sponge in the form of sheet, strip, extrusions, and molded shapes.
AMS CE Elastomers Committee
Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 3000 Denier (3300 Dtex), 0.9% FinishAMS3904/9B (Current)8/1/2016
This specification covers one type of organic (para-aramid) fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.
AMS P17 Polymer Matrix Composites Committee
Rope, Aramid Fiber, Jacketed Cabled Strand, Extruded JacketAMS3813/1B (Current)6/15/2016
This specification covers cabled-strand ropes formed from impregnated aramid fibers.
AMS P Polymeric Materials Committee
Webbing, Low Modulus Aramid 3/4 (19) Wide, 600 (2669) Breaking Strength Herringbone TwillAMS3798/3C (Current)4/14/2015
This specification covers one width and one breaking strength of low-modulus aramid webbing.
AMS P Polymeric Materials Committee
Boron Filament Tape, Epoxy-Resin-Impregnated Type B5.6-E180 (Type B0.142-E82)AMS3867/5B (Current)10/12/2016
This specification covers one type of epoxy-resin-impregnated boron filaments 0.0056 inch (0.142 mm) in diameter in the form of continuous tape supported on a glass cloth carrier.
AMS P17 Polymer Matrix Composites Committee
SAE Technical Standards Board Rules and RegulationsTSB001_201411 (Current)11/14/2014
Executive Standards Committee
Thread, Para-Aramid Intermediate Modulus 2000 yards per pound (4032 m/kg), 80 pounds force (356 N) Breaking StrengthAMS3787/5B (Current)6/14/2016
This specification covers one weight and strength of para-aramid thread.
AMS P Polymeric Materials Committee
Core, Polyurethane Foam (Polyether) 2.0 Pounds Per Cubic Foot (32 kg/m3) DensityAMS3725/1B (Current)11/10/2016
This specification covers a rigid cellular polyurethane or polyisocyanurate (polyether only) foam in the form of board or block.
AMS P17 Polymer Matrix Composites Committee
Webbing, Nylon, Integral Locking Slots 5/8 (15.9) Wide, 1000 (4448) Breaking StrengthAMS3797/2C (Current)4/14/2015
This specification covers one width and one strength of integral locking slot nylon webbing.
AMS P Polymeric Materials Committee
Webbing, Woven, Nylon 2600 Pounds Force (11,565 N)AMS3778/4B (Current)2/9/2012
This specification covers one type of nylon webbing.
AMS P Polymeric Materials Committee
Brass Forgings, Free Cutting 60Cu - 2.0Pb - 37.5Zn As Forged (M10)AMS4614J (Current)9/30/2022
This specification covers one type of brass in the form of forgings and forging stock.
AMS D Nonferrous Alloys Committee
Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or ExtrusionsAMS3678/4B (Current)2/29/2016
This specification covers a polytetrafluoroethylene (PTFE) resin filled with 25% glass fiber in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process.
AMS P Polymeric Materials Committee
Sponge, Chloroprene (CR) Rubber, SoftAMS3197N (Current)3/1/2022
This specification covers a chloroprene (CR) rubber sponge in the form of sheet, strip, molded shapes, or other forms, as ordered.
AMS CE Elastomers Committee
Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E180 (Type B0.102-E82)AMS3867/4B (Current)10/12/2016
This specification covers one type of epoxy-resin-impregnated boron filaments 0.0040 inch (0.102 mm) in diameter in the form of continuous tape supported on a glass cloth carrier.
AMS P17 Polymer Matrix Composites Committee
Steel, Sheet and Strip 0.08 - 0.13C, Aluminum Killed (SAE 1010) Deep Forming GradeAMS5047G (Current)2/15/2017
This specification covers an aluminum-killed carbon steel in the form of sheet and strip.
AMS E Carbon and Low Alloy Steels Committee
Cobalt Alloy, High Temperature Brazing Filler Metal 50Co - 8.0Si - 19Cr - 17Ni - 4.0W - 0.80B 2050 to 2100 °F (1121 to 1149 °C) Solidus-Liquidus RangeAMS4783H (Current)7/7/2021
This specification covers a cobalt alloy in the form of wire, rod, strip, foil, and powder and a viscous mixture (paste) of the powder in a suitable binder.
AMS F Corrosion and Heat Resistant Alloys Committee
Gold Wire and Ribbon 99.97Au AnnealedAMS7731D (Current)3/14/2018
This specification covers pure gold in the form of wire 0.005 to 0.040 inch (0.012 to 1.000 mm) inclusive, in nominal diameter, and ribbon 0.002 to 0.051 inch (0.05 to 1.28 mm) inclusive, in nominal thickness (see 8.5).
AMS D Nonferrous Alloys Committee
Interleaf Carrier Material, Composite Tape Parchment, 0.004 inch (0.10 mm), UnperforatedAMS3898/1B (Current)4/13/2022
This specification covers one type of parchment in the form of rolls of sheeting or reels of unperforated tape of the width specified.
AMS P17 Polymer Matrix Composites Committee
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 5/16 Inch (7.9 mm), 0.053 Ounces per Yard (1.64 g/m)AMS3793/10A (Current)9/11/2013
This specification covers one class of para-aramid tape and webbing of a single width and with varying weights.
AMS P Polymeric Materials Committee
Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 1000 Denier (1110 Dtex), 1.0% FinishAMS3904/3C (Current)8/1/2016
This specification covers one type of organic (para-aramid) fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.
AMS P17 Polymer Matrix Composites Committee
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 85 Durometer “A”AMS3571/5C (Current)9/23/2011
This specification covers one type of polyether-type urethane (EU) resin and hardener which, when mixed and cured, produce elastomeric polyurethane products.
AMS P Polymeric Materials Committee
Aluminum Sheet, Laminated Edge BondedAMS4012G (Current)7/28/2014
This specification covers an aluminum or aluminum alloy in the form of sheet, laminated and edge bonded.
AMS D Nonferrous Alloys Committee
Cloth, Parachute, Meta-Aramid, Low Modulus 6.5 (220) Weight, Special WeaveAMS3801/2C (Current)10/11/2016
This specification covers one weight and one weave of low-modulus meta-aramid cloth.
AMS P Polymeric Materials Committee
Roving, Organic Fiber (Para-Aramid) Intermediate Modulus 15000 Denier (16700 Dtex), 7.0% FinishAMS3904/10B (Current)8/1/2016
This specification covers one type of organic (para-aramid) fiber in the form of roving. The product shall be formed as a number of ends, tows, or strands collected into a parallel bundle with little or no twist.
AMS P17 Polymer Matrix Composites Committee
Thread, Para-Aramid Intermediate Modulus 500 yards per pound (1008 m/kg), 225 pounds force (1001 N) Breaking StrengthAMS3787/8C (Current)6/30/2016
This specification covers one weight and strength of para-aramid thread.
AMS P Polymeric Materials Committee
Yarn, Organic Fiber (Para-Aramid), High Modulus 1420 Denier (1580 d tex), 0.6% FinishAMS3901/4D (Current)7/30/2014
AMS P17 Polymer Matrix Composites Committee
Plating, Brush, Zinc-Nickel Low Hydrogen EmbrittlementAMS2451/9C (Current)5/24/2023
This specification covers the requirements for brush plating of zinc-nickel by electrodeposition.
AMS B Finishes Processes and Fluids Committee
Copper Wire, Oxygen-Free 99.95(Cu+Ag) AnnealedAMS4701H (Current)8/8/2015
This specification covers one type of copper in the form of wire.
AMS D Nonferrous Alloys Committee
Case Hardening of Titanium and Titanium AlloysAMS2775C (Current)10/22/2015
This specification covers the engineering requirements for producing a carbon-oxygen-nitrogen-bearing case on titanium and titanium alloys by means of a molten salt bath, and the properties of the case.
AMS B Finishes Processes and Fluids Committee
Steel, Bars 0.90 - 1.03CAMS5132M (Current)1/28/2022
This specification covers a high-carbon steel in the form of bars.
AMS E Carbon and Low Alloy Steels Committee
TAPE, NYLON, NONMELTING, REINFORCING 2 (50) Wide, 2000 (8895 N) Breaking StrengthAMS3777/8 (Current)10/1/1995
This specification covers one width and strength of nylon tape.
AMS P Polymeric Materials Committee
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 55 Durometer “D”AMS3571/7C (Current)9/23/2011
This specification covers one type of polyether-type urethane (EU) resin and hardener which, when mixed and cured, produce elastomeric polyurethane products.
AMS P Polymeric Materials Committee
Alcohol, Denatured EthylAMS3002H (Current)3/24/2014
This specification covers a denatured ethyl alcohol in the form of a liquid.
AMS B Finishes Processes and Fluids Committee
Solvent, Petroleum AromaticAMS3165F (Current)2/9/2016
This specification covers a petroleum-base liquid solvent.
AMS B Finishes Processes and Fluids Committee
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 65 Durometer “A”AMS3571/3C (Current)9/23/2011
This specification covers one type of polyether-type urethane (EU) resin and hardener which, when mixed and cured, produce elastomeric polyurethane products.
AMS P Polymeric Materials Committee
Alloy Wire, Round 35Pd - 30Ag - 14Cu - 10Au - 10Pt - 0.85Zn Solution Heat TreatedAMS7735E (Current)3/4/2018
This specification covers a palladium-silver alloy in the form of round wire 0.004 to 0.080 inch (0.10 to 2.03 mm) inclusive, in nominal diameter (see 8.5).
AMS D Nonferrous Alloys Committee
Items per page:
1 – 50 of 216101