Results
This AIR provides information about the specific requirements for missile hydraulic pumps and their associated power sources.
This SAE Recommended Practice establishes uniform test procedures for friction based parking brake components used in conjunction with hydraulic service braked vehicles with a gross vehicle weight rating greater than 4500 kg (10 000 lb). The components covered in this document are the primary actuation and the foundation park brake. Various peripheral devices such as application dashboard switches or indicators are not included. These test procedures include the following: a Brake Related Tests 1 Brake Functional Performance 2 Brake Dynamic Torque Performance 3 Brake Corrosion Resistance 4 Brake Endurance with Torque 5 Brake Endurance without Torque 6 Vibration Resistance 7 Brake Ultimate Static Load 8 Brake Lining Wear Adjuster Function b Actuation Related Tests 1 Mechanical Actuator Functional Performance 2 Mechanical Actuator Endurance 3 Mechanical Actuator Quick Release 4 Mechanical Actuator Ultimate Load 5 Spring Apply Actuator Functional Performance 6 Spring Apply Actuator
This SAE Standard was developed to provide a method for indicating the direction of engine rotation and numbering of engine cylinders. The document is intended for use in designing new engines to eliminate the differences which presently exist in industry.
This specification covers a zinc alloy in the form of die castings.
This specification covers an alkaline-type, thickened paint remover in the form of a liquid.
This specification covers established manufacturing tolerances applicable to sheet, strip, and plate of nickel, nickel alloys, and cobalt alloys ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term “excl” is used to apply only to the higher figure of a specified range.
This specification covers an aluminum alloy in the form of seamless round tubing with wall thickness from 0.025 to 0.500 inch (0.64 to 12.70 mm), inclusive (see 8.6).
This procurement specification covers bolts and screws made from a corrosion- and heat-resistant, age hardenable nickel base alloy of the type identified under the Unified Numbering System as UNS N07001. The following specification designations and their properties are covered:
This specification covers a standard fluorosilicone (FVMQ) rubber stock in the form of molded test slabs.
This specification covers established inch/pound manufacturing tolerances applicable to copper and copper alloy wire ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted.
This specification covers a glass-cloth-reinforced polytetrafluoroethylene (PTFE) resin in the form of sheet.
This specification covers a premium aircraft-quality, maraging alloy steel in the form of bars, forgings, mechanical tubing, flash welded rings up through 10.000 inches (254.00 mm), inclusive, in diameter or least distance between parallel sides and stock of any size for forging or flash welded rings.
The following schematic diagrams reflect various methods of illustrating automotive transmission arrangements. These have been developed to facilitate a clear understanding of the functional interrelations of the gearing, clutches, hydrodynamic drive unit, and other transmission components. Two variations of transmission diagrams are used: in neutral (clutches not applied) and in gear. For illustrative purposes, some typical transmissions are shown.
This SAE Aerospace Recommended Practice (ARP) provides criteria for the design, installation, operation, and training aspects of head-up display (HUD) systems in transport category aircraft, with emphasis on pilot interface and operational requirements. The recommendations apply to permanently installed (including stowable) HUDs that display primary flight information, including those integrating enhanced flight vision system (EFVS) imagery. The intent is to ensure HUDs are designed and used in a manner that improves pilot situational awareness and flight technical performance across all phases of flight, up to and including low-visibility operations. While technical design standards (optical performance, hardware specs, etc.) are defined in documents like ARP5288 and AS8055, this document focuses on pilot usage considerations and human factors. HUD systems addressed here are typically designed to support a fail-passive operational concept applicable to Category III instrument approach
To standardize Turbine and Compressor rotor blade drawing data and blade marking requirements for the purpose of classifying blades with respect to their moment weight.
This SAE Aerospace Recommended Practice (ARP) covers the functional, design, construction, and test requirements for Automatic Braking Systems. Installation information and lessons learned are also included.
The purpose of this SAE Aerospace Recommended Practice (ARP) is to describe key features that should be incorporated in the lavatory smoke detector system. Consideration has been given to existing requirements of the FAA and to recommendations of aircraft operators and manufacturers. This document is deliberately not specific in all areas in order to maximize the freedom to use state-of-the-art design and manufacturing technologies. Safe, reliable, and effective lavatory smoke detectors remain the primary goal of the document.
This Aeronautical Recommended Practice covers Liquid Oxygen Quantity Indicators for use with associated Liquid Oxygen converters.
This SAE Aerospace Recommended Practice (ARP) recommends criteria for an Electronic Data Management System (EDMS) for use on the flight deck of transport aircraft. The EDMS may be the primary, and in some cases sole, on board source of documentation and information for flight operations, engineering, aircraft maintenance, cabin services, and training. This document addresses flight operations applications only. It addresses the requirements for the flight deck characteristics of airborne equipment elements for an Electronic Data Management System (EDMS), but not the ground support system requirements. Development of ground support systems for EDMS will be a significant task, which must take account of the end-user information handing requirements specified here. An Electronic Library System (ELS) is a partial implementation of EDMS, which incorporates only the data storage, retrieval and display functions. The appropriate aspects of this document are applicable to Electronic Library
This SAE Aerospace Recommended Practice (ARP) addresses the design, installation, and testing of coiled tube assemblies ranging from 1/4 inch (6.3 mm) to 1.0 inch (25 mm) diameter using CRES tubing per AMS-T-6845, unless otherwise approved by the Procuring Activity. This ARP specifically details three different configurations of coiled tubing. These configurations should be compatible with pressure levels up to 3000 psi (20.7 MPa) upon the completion of the analysis for the actual stress and life requirement of the intended application. However, formal qualification tests are recommended to verify the satisfactory installation, clamping, and the life of each unique design. NOTE: Refer to ARP4146 for information on design of coiled tube assemblies using Titanium tubing.
This Aeronautical Standard covers two basic types of fuel, oil and hydraulic pressure instruments as follows: Type I - Direct Indicating Type II - Remote Indicating This Aerospace Standard does not apply to engine mounted torque meter systems.
This Aeronautical Standard covers two basic types of instruments as follows: Type I - Float Instruments Type II - Capacitance Instruments
This recommended practice provides the dimensional data for the diameters of surfaces that interface with the following tee head bolt series: AS3232 thru AS3235, MS9397 thru MS9402 and MS9432 thru MS9437, or other parts with compatible dimensions.
This SAE Aerospace Recommended Practice (ARP) provides a standard reference list of code designations to be applied to the various sleeves used on hose assemblies when preparing related "AS" specifications and part standards.
The symbols specified in this SAE Aerospace Recommended Practice (ARP) are applicable to all aircraft cargo handling systems for lower deck as well as for upper deck systems. Utilizing the symbols the conveyance, guidance, restraint, power drive unit and the degree of automation for the total cargo handling system can be depicted.
This specification covers the requirements for qualification, requalification, and certification of etch inspectors.
Items per page:
50
1 – 50 of 219531