Wear in Cummins M-11/EGR Test Engines

The Cummins M-11/EGR diesel engine test is a key tool in evaluating lubricants for the new PC-9 performance category. Wear on liners, crossheads, rocker arms and top ring faces of M-11/EGR high soot test engines operated with two different test cycles was studied through analytical surface techniques. The first test cycle used in this study was an early prototype PC-9 cycle, and the second test cycle was the PC-9 test procedure. Abrasive wear was observed on liners, crossheads and top ring faces. In addition to abrasive wear, corrosive wear was also found on M-11/EGR liners. However, no corrosive wear was observed on crossheads, rocker arms or top ring faces. Soot provides the major contribution to abrasive wear, since the widths of the relatively uniform parallel grooves in the wear scars closely match the primary soot particle sizes. More importantly, soot produced by the M-11/EGR engine was found to be harder than the engine parts. This provides more evidence to support the theory that soot-induced abrasive wear can be the dominant wear mechanism in diesel lubrication.