Trim Analysis and Flight Modelling of a Quad-Tilt-Wing UAV
SM_2024_ARF-5481
11/7/2024
- Content
-
Trim analysis of a quad-tilt-wing UAV with gross weight of about 25 kg developed at JAXA is conducted. rFlight, an in-house code developed at JAXA, which is based on low-fidelity blade-element theory, is applied. The aerodynamic coefficients of the propellers, the wings and the fuselage are fitted to match the measurements in the wind-tunnel. The interference effects between the components are also considered. With suitable weighting of available controls of the propeller rotating speeds and trailing flaps on the wings, and depending on the wing tilt angles, the trim states of the UAV at each tilt angles are obtained across the design flight speed range. Combined with allowable aircraft attitude bounds, the transition corridor is obtained. Based on small perturbations of the flight conditions and controls from the trimmed values, linearized flight models of the UAV at specific wing/propeller tilt angles and flight conditions are estimated.
- Citation
- Tanabe, Y., Sugawara, H., Arikawa, S., and Muraoka, K., "Trim Analysis and Flight Modelling of a Quad-Tilt-Wing UAV," 10th Asian/Australian Rotorcraft Forum - Melbourne, Australia 2024, Melbourne, Australia, November 7, 2024, https://doi.org/10.4050/SM_2024_ARF-5481.