Three-Dimensional Transient Thermal-Fluid Coupling Numerical Simulation of the Molten Pool in Aluminum Alloy Laser Welding

Laser welding technology for aluminum alloy electrode and busbar connections: addressing challenges in battery module assembly. In this work, a CFD framework was built in ANSYS Fluent using a Gaussian rotating heat-source representation, while a VOF approach was used to capture the transient gas–liquid interface in deep-penetration welding. A three-dimensional, transient, thermal-fluid coupled numerical model of the dual-layer heterogeneous aluminum alloy laser deep penetration weld pool was established concurrently with laser deep penetration welding experiments. Results indicate: Peak flow velocities in the weld pool during welding are concentrated along the weld centerline, with flow vectors predominantly directed axially along the weld. Once a quasi-steady keyhole regime is established, vaporization-induced recoil pressure becomes the primary driver governing melt circulation. The liquid metal first impinges on the pool bottom along the keyhole wall and then recirculates upward near the pool boundary, producing strong vortical motion. These findings are intended to support parameter selection and process optimization for laser welding of layered dissimilar aluminum components used in battery tab–busbar assemblies.