Testing and Evaluation of EV-1300 Lead-Acid Modules for the Hybrid Vehicle Application
840474
02/01/1984
- Event
- Content
- This paper presents the results of testing and evaluation of GE/Globe EV-1300 lead-acid modules developed by Globe Battery Division of Johnson Controls, Inc. for the hybrid vehicle, HTV-1, developed by General Electric (GE) for the Department of Energy. The design of this battery was derived from that of the Globe Improved State of the Art (ISOA) battery under development for the ETV-1 all-electric vehicle. Key differences in the battery performance requirements for the HTV-1 hybrid vehicle, as opposed to the ETV-1, are higher specific power [137 W/kg versus 104 W/kg sustained for 15 seconds at 50% depth of discharge (DOD)] and less specific energy (36.1 Wh/kg versus 37.5 Wh/kg at a 3h discharge rate). Higher battery power is required for two reasons. First, in HTV-1, the battery is a smaller mass fraction of the design vehicle (341 kg battery/∼1800 kg vehicle = ∼0.19) compared to the ETV-1 (488 kg battery/∼1660 kg vehicle = ∼0.29). Second, the performance requirements for the HTV-1 are referenced to the more-demanding EPA urban driving schedule compared to the SAE J227aD urban driving schedule for the ETV-1. Less specific energy was specified for the HTV-1 to allow the battery developer to concentrate on high specific power; furthermore, petroleum energy is available to achieve extended range. The objective of the hybrid vehicle is to reduce petroleum consumption in overall driving.
- Pages
- 8
- Citation
- Corp, D., Hayes, E., Gay, E., Webster, C. et al., "Testing and Evaluation of EV-1300 Lead-Acid Modules for the Hybrid Vehicle Application," SAE Technical Paper 840474, 1984, https://doi.org/10.4271/840474.