Study on the High-Temperature Creep Behavior of Ti-1100 Alloy

This study investigates the creep response of the high-temperature titanium alloy Ti-1100 over a temperature range of 550-700 °C under applied stresses varying from 150 to 450 MPa. Under different combinations of stress and temperature, the creep rate, stress exponent, and activation energy for creep were determined using the Arrhenius relationship, while the corresponding creep characteristics and microstructural changes were examined through optical microscopy (OM), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). The findings indicate that an alloy is highly sensitive to temperatures and stresses when subjected to long-term creep. At the temperature of 550-700 °C, the Ti-1100 alloy has relatively high creep activation energy when subjected to an applied stress of 300 MPa. For the Ti-1100 alloy, the stress exponent was determined to be 5.33 within the stress interval of 150-450 MPa at 600 °C. When considered alongside the observed microstructural characteristics, this result indicates that dislocation climb serves as the primary mechanism controlling creep during prolonged exposure. Within the investigated temperature and stress window, creep deformation in Ti-1100 gives rise to localized regions with elevated residual stress, and this tendency becomes more pronounced as both temperature and applied stress increase. These areas are likely to grow and evolve into microcracks, thus contributing to the microstructural instability of the alloy.