Study on Dynamic & Vibro-Acoustic Behavior of Automobile AC Lines by Using CAE Simulation
2026-28-0867
To be published on 11/25/2026
- Content
- For an AC system in automobiles, AC lines play a significant role as these parts are connected to different vibrating components of the AC system like compressor, condenser, HVAC and rear AC unit inside vehicle. AC lines are refrigerant carrying parts and hence special care needs to be taken as these are thermally isolated and are vibration induced parts. The AC lines involve combination of hose parts and aluminum pipe parts with muffler addition based on requirement. It is thermally insulated in many locations to avoid any heat rejections and absorption. Since the AC lines are susceptible to dynamic vibrations and these parts are connected to different vibrating areas like engine room, car interior and roof top of different vibration severity and frequencies, the behavior of the AC lines under these conditions needs to be studied and verified. Apart from these factors, vehicle frequencies under road-load conditions also influence the dynamic behavior of the AC lines. The present paper primarily focuses on the study of pipes of different sizes and materials under dynamic load conditions and predicted vibro-acoustic noise at the road load conditions. The challenges associated with conducting actual vibration tests on AC lines under different loading conditions are also taken into consideration while performing the simulations. Many of the challenges encountered during actual testing can be addressed through simulations themselves. Hyper mesh was used for the meshing of the AC lines and Altair optistruct was used as solver for dynamic analysis and vibro-acoustic analysis. The dynamic analysis results were validated against actual test results and showed an accuracy of approximately 90%.
- Citation
- Parayil, P., Mehra, A., and Rabadiya, R., "Study on Dynamic & Vibro-Acoustic Behavior of Automobile AC Lines by Using CAE Simulation," 9th SAENIS TTTMS International Conference 2026, Roorkee, India, December 3, 2026, .