Structural Optimization Design and Experimental Study of a Shipboard Cabinet

The shipboard cabinet is an important carrier of radar equipment. It is necessary to ensure a good working environment and provide maximum support and protection for the internal equipment. In this paper, a shipboard cabinet that can realize a parallel heat dissipation architecture was taken as the object. The natural frequency and mode were used to find the area where the cabinet was prone to high-frequency vibration under impact excitation. The response characteristics of the cabinet under strong impact conditions were studied using a nonlinear transient dynamic analysis method. The weak links in the cabinet structure were identified, and the structural reinforcement design was carried out. After optimization, the maximum stress value of the cabinet was significantly reduced, and the safety factor was greater than 1.5. Finally, the effectiveness of the structural optimization was verified through experiments. The cabinet vibration isolation system was optimized and selected to ensure that it has good vibration isolation characteristics and impact response. The vibration isolation performance of the wire mesh isolator and the non-resonant peak isolator in the shipboard vibration and impact environment was verified by experiments. The impact transmissibility is less than 0.3, and the vibration transmissibility is less than 1.5, which can further improve the vibration and impact resistance of the shipboard cabinet.