Due to topographical constraints and limited space for evasive manoeuvres, accidents in mountain expressway tunnels can easily trigger long-distance congestion, queues spilling onto the open road, and even a chain reaction of serious secondary accidents; To address this challenge, this paper explores a low-cost, easily implementable active control scheme. Focusing on single-direction, dual-lane mountain expressway tunnel sections, it proposes a coordinated active control strategy comprising ‘graded traffic restriction at the entrance + in-tunnel speed guidance based on the PSO algorithm’. Utilising the SUMO micro-simulation platform, a control group with no intervention was established for comparison against experimental groups with traffic restriction levels of 30%, 50%, 70% flow restriction levels for comparative validation. Additionally, the PSO algorithm was employed to determine the optimal speed limit combinations during the accident period. Following a multi-objective trade-off analysis of safety indicators and system delays, the study demonstrates that a 50% flow restriction threshold combined with specific segmented speed limits (46.5 km/h upstream of the incident and 19.8 km/h in the core incident zone) constitutes the multi-objective weighted optimal solution that balances both tunnel safety and overall road network efficiency; This strategy successfully validated the ‘congestion displacement’ mechanism, reducing high-risk queuing within the confined space from 600 m under uncontrolled conditions to 128 m. Furthermore, as this low-cost solution requires no complex equipment, it provides a useful theoretical basis and reference for the formulation of emergency management plans for mountain expressway tunnels.