Pulsed Combustion Jet Ignition in Lean Mixtures
942048
10/01/1994
- Event
- Content
- Lean-burn is the most attractive way to lower emissions of NOx while improving the fuel consumption simultaneously in spark ignition engines. A Pulsed Combustion Jet (PCJ) ignition system has a great potential to enhance ignition reliability and burning rate of lean fuel-air mixtures. Its action is based on the utilization of turbulent plumes formed by jets produced by generators, in the shape and size of an ordinary spark plug, that embody a small (500 mm3 or less) cavity, capped with an orifice plate and outfitted with a hollow electrode.Performance characteristics of PCJ were established by combustion tests carried out in a diskshaped, constant volume combustion chamber using lean methane-air mixtures. The results were compared to those obtained with Pulsed Plasma Jet (PPJ) an standard spark plug ignition systems. Lean limit was extended most by PCJ ignition under both quiescent and swirl conditions. In the case of swirl, it was revealed that the flame holding in the region of maximum swirl velocity was of prime significance in enhancing the combustion rate. In PCJ, the jet plume ejected from the orifice of the generator displayed a similar flame-holding effect, yielding good performance characteristics.
- Pages
- 11
- Citation
- Murase, E., Ono, S., Hanada, K., and Oppenheim, A., "Pulsed Combustion Jet Ignition in Lean Mixtures," SAE Technical Paper 942048, 1994, https://doi.org/10.4271/942048.