Multi Fidelity Aerodynamic Design of Ducted Microscale Rotor Systems
F-0070-2014-9428
5/20/2014
- Content
-
ABSTRACT
Computational fluid dynamic models of varying fidelity are used in the analysis and design of a ducted micro scale rotor system. A three dimensional Reynolds Averaged Navier-Stokes (RANS) solver is employed as the high fidelity model, an axisymmetric RANS approach with a blade element representation of the rotor is used as the low fidelity model and an axisymmetric inviscid actuator disk model is used to relate the present work to analytical theories. A ducted rotor system (at a tip Reynolds number of 50000) is used for validation purposes and to serve as a baseline for design improvements under hovering flight conditions. The low fidelity model is used to efficiently explore the design space of the shroud and to guide the parametrization of the shroud geometry. A gradient-based optimization approach is then used to obtain a design that is predicted to generate a thrust improvement of 56% compared to the baseline configuration, though the high fidelity simulations predict a a smaller improvement at this design point. A number of high fidelity runs are performed around the low fidelity design to derive a shroud that offers a 24% increase in thrust over the baseline configuration (a 44% increase over the free rotor), at roughly the same power requirement. This work represents the first steps towards our goal of achieving detailed design solutions to rotor aeromechanics problems while retaining the ability to efficiently navigate large design spaces.
- Citation
- Duraisamy, K. and Singh, A., "Multi Fidelity Aerodynamic Design of Ducted Microscale Rotor Systems," Vertical Flight Society 70th Annual Forum & Technology Display, Montréal, Québec, May 20, 2014, https://doi.org/10.4050/F-0070-2014-9428.