Modeling and Simulation of the Quick Discharge Hydraulic System of an Internal Mixer

The hydraulic system of the mechanical lever locking device of the internal mixer and the hydraulic system of the gear rack swing hydraulic cylinder are developed. The AMESim simulation models of the two systems are established, and the simulation parameters of each hydraulic element are reasonably set. Firstly, the relationship between the opening time of the mechanical lever locking device of the internal mixer and the charging volume and pressure of the accumulator is analyzed. It is found that the locking time of the mechanical lever locking device of the internal mixer needs about 10 s, while the unlocking time is less than 0.05 s. The unlocking and rubber discharging speed is very fast, and the opening time of the mechanical lever locking device of the internal mixer will become shorter when the pressure or volume of the accumulator air bag becomes larger; Through the analysis of the hydraulic system of the rack and pinion swing hydraulic cylinder, it is obtained that when the air bag volume of the accumulator is 7.557 L, the displacement of the piston rod of the rack and pinion swing hydraulic cylinder rises fastest, which is shortened from 20 s to about 15 s; The greater the air bag pressure of the accumulator is, the faster the displacement of the piston rod of the gear rack swing hydraulic cylinder rises, which is shortened from 20 s to 18 s.