Accurate prediction of electro-thermal behavior is critical for lithium-ion battery systems operating under varying load conditions. In many existing approaches, electrical and thermal behaviors are either treated independently or require high-fidelity simulations that are computationally expensive and not suitable for rapid engineering analysis. This work presents an integrated electro-thermal modeling framework for lithium-ion cells (LG INR21700 M50T), with extension towards battery pack-level applications, demonstrated on a 6S3P configuration battery pack with integrated cold plate assisted cooling. The proposed approach enables prediction of voltage response, heat generation, and temperature evolution under both multi-C-rate and dynamic loading conditions.
Unlike conventional workflows that rely on tightly coupled simulations or isolated modeling domains, the present work focuses on a computationally efficient and physics-informed framework that directly links electro-thermal predictions with CFD-ready heat generation outputs. This makes the approach more suitable for early-stage design and system-level thermal studies.
The framework combines a physics-informed equivalent circuit model (ECM) with data-driven parameterization using experimentally derived voltage–capacity characteristics. Open-circuit voltage (OCV) is obtained from low-current discharge data, while current-dependent internal resistance is incorporated to improve prediction accuracy across a wide range of operating currents.
The model is validated against multiple C-rate profiles at the cell level using measured voltage data and is cross verified against a 3D CFD pack level model, showcasing strong agreement in both cases. The reduced-order 1D thermal network reproduces CFD-predicted peak pack temperatures within 0.1°C at low discharge rates (5A) and within 3°C at high discharge rates (10A), across ambient conditions of 25°C and 45°C.Heat generation is estimated based on irreversible losses, and a lumped thermal model is used to predict temperature evolution considering convective heat dissipation. The model is further extended to handle time-varying current inputs and incorporates an equivalent cooling-boundary abstraction, enabling simulation of realistic dynamic loading scenarios. The resulting electro-thermal outputs, including heat generation and temperature profiles, can be directly used as inputs for CFD-based thermal analysis. The proposed framework offers a practical and scalable solution for battery thermal design, system-level analysis, and digital twin development.