High-altitude wind interference poses severe threats to the attitude maintenance and safe landing of reusable launch vehicles adopting vertical landing mode. Such adverse impacts become particularly prominent during the aerodynamic deceleration stage, where the main engine is shut down and the available control torque is strictly constrained. Conventional wind forecasting approaches fail to deliver timely real-time results and often require additional sensor configuration; meanwhile, classic control methods tend to suffer from obvious chattering phenomena and slow convergence speed when exposed to strong external wind perturbations. Targeting the above practical limitations, this study develops a finite-time adaptive attitude control strategy integrated with online wind estimation, which is tailored for vertical landing launch vehicles under sparse sensor measurement conditions. This work first constructs an attitude dynamic model oriented to controller design. The model fully takes into account the coupling effect between attitude angles and angular velocities, as well as the nonlinear characteristics introduced by wind disturbance. On this basis, an LSTM network is established to implement real-time wind estimation and prediction. The network only relies on easily measurable state information including pitch, yaw and roll angles, together with normal and lateral apparent acceleration deviations, eliminating the need for specialized wind measurement sensors. With 8-bit quantization and 30% parameter pruning optimization, the lightweight network is compressed to 89.6k parameters. Deployed on a radiation-hardened PowerPC 750FX processor with 1 GHz main frequency and 256 MB memory, its single inference latency is only 7.2 ms, which fully satisfies the time limit of onboard control loops. Furthermore, relying on homogeneity principle, this paper designs a non-recursive high-order sliding mode control algorithm with homogeneous characteristics. It can guarantee finite-time convergence of attitude errors and effectively restrain system chattering. An adaptive compensation module is also embedded to offset wind perturbation by utilizing the estimated wind information output from the LSTM model. Simulation comparisons under six typical wind environment cases verify the effectiveness of the proposed method. The results demonstrate that the designed scheme can cut wind disturbance torque by a maximum of 55.3% and reduce the demand for control torque by 52.7%. It also shortens the attitude stabilization duration by 35% and lowers the range of attitude angle fluctuation by 69%, which effectively improves the system’s anti-interference capability and environmental adaptability to complex wind conditions.